Product range |
ZE overload relays for mini contactor relays |
Phase-failure sensitivity |
IEC/EN 60947, VDE 0660 Part 102 |
Description |
Test/off button Reset pushbutton manual/auto Trip-free release |
Mounting type |
Direct mounting |
Overload releases [Ir
] |
|
Contact sequence |
2.4 - 4 A |
N/O = Normally open |
|
N/C = Normally closed |
|
For use with |
1 N/O |
Type “1” coordination [gG/gL] |
1 N/C |
Type “2” coordination [gG/gL] |
DILEM DIULEM/21/MV |
Notes |
|
Notes |
35 A |
Standards |
10 A |
Climatic proofing |
Overload trigger: tripping class 10 A Short circuit protection: observe the maximum permissible fuse of the contactor with direct device mounting. Suitable for protection of Ex e-motors
II(2)G [Ex d] [Ex e] [Ex px] II(2)D [Ex p] [Ex t] PTB 10 ATEX 3014 Observe manual MN03407003Z-DE/EN. |
Ambient temperature |
When fitted directly to the contactor a clearance of at least 5 mm is required between the overload relays. |
| | 1 Contactor | |
|
Ambient temperature >Open |
|
Ambient temperature >Enclosed |
IEC/EN 60947, VDE 0660, UL, CSA |
Temperature compensation |
Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
Weight |
Operating range to IEC/EN 60947 PTB: -5 °C - +55 °C |
Mechanical shock resistance |
-25 - +50 °C |
Degree of Protection |
- 25 - 40 °C |
Protection against direct contact when actuated from front (EN 50274) |
Continuous |
Altitude |
0.077 kg |
Rated impulse withstand voltage [Uimp] |
10 Sinusoidal Shock duration 10 ms g |
Overvoltage category/pollution degree |
IP20 |
Rated insulation voltage [Ui
] |
Finger and back-of-hand proof |
Rated operational voltage [Ue] |
Max. 2000 m |
Safe isolation to EN 61140 >Between auxiliary contacts and main contacts |
|
Safe isolation to EN 61140 >Between main circuits |
6000 V AC |
Temperatur compensation residual error > 40 ºC |
III/3 |
Current heat loss (3 conductors) >Lower value of the setting range |
690 V |
Current heat loss (3 conductors) >Maximum setting |
690 V AC |
Terminal capacities >Solid |
300 V AC |
Terminal capacities >Flexible with ferrule |
300 V AC |
Terminal capacities >Solid or stranded |
≦ 0.25 %/K |
Terminal screw |
2.5 W |
Tightening torque |
5.7 W |
Stripping length |
1 x (0.75 - 2.5) mm2 |
Tools >Pozidriv screwdriver |
1 x (0.5 - 1.5) mm2 |
Tools >Standard screwdriver |
18 - 14 AWG |
Rated impulse withstand voltage [Uimp] |
M3.5 |
Overvoltage category/pollution degree |
1.2 Nm |
Terminal capacities >Solid |
8 mm |
Terminal capacities >Flexible with ferrule |
2 Size |
Terminal capacities >Solid or stranded |
0.8 x 5.5 mm |
Terminal screw |
|
Tightening torque |
4000 V |
Stripping length |
III/3 |
Tools >Pozidriv screwdriver |
1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2 |
Tools >Standard screwdriver |
1 x (0.5 - 1.5) 2 x (0.5 - 1.5) mm2 |
Rated insulation voltage [Ui
] |
2 x (18 - 12) AWG |
Rated operational voltage [Ue
] |
M3.5 |
Safe isolation to EN 61140 >between the auxiliary contacts |
1.2 Nm |
Conventional thermal current [Ith
] |
8 mm |
Rated operational current [Ie
] >AC-15 >Make contact >120 V [Ie
] |
2 Size |
Rated operational current [Ie
] >AC-15 >Make contact >220 V 230 V 240 V [Ie
] |
0.8 x 5.5 mm |
Rated operational current [Ie
] >AC-15 >Make contact >380 V 400 V 415 V [Ie
] |
500 V AC |
Rated operational current [Ie
] >AC-15 >Make contact >500 V [Ie
] |
500 V AC |
Rated operational current [Ie
] >AC-15 >Break contact >120 V [Ie
] |
250 V AC |
Rated operational current [Ie
] >AC-15 >Break contact >220 V 230 V 240 V [Ie
] |
6 A |
Rated operational current [Ie
] >AC-15 >Break contact >380 V 400 V 415 V [Ie
] |
1.5 A |
Rated operational current [Ie
] >AC-15 >Break contact >500 V [Ie
] |
1.5 A |
Rated operational current [Ie
] >DC L/R ≦ 15 ms |
0.7 A |
Rated operational current [Ie
] >DC L/R ≦ 15 ms >24 V [Ie
] |
0.5 A |
Rated operational current [Ie
] >DC L/R ≦ 15 ms >60 V [Ie
] |
1.5 A |
Rated operational current [Ie
] >DC L/R ≦ 15 ms >110 V [Ie
] |
1.5 A |
Rated operational current [Ie
] >DC L/R ≦ 15 ms >220 V [Ie
] |
0.7 A |
Short-circuit rating without welding >max. fuse |
0.5 A |
Notes |
Switch-on and switch-off conditions based on DC-13, time constant as specified. |
Auxiliary contacts >Pilot Duty >AC operated |
0.9 A |
Auxiliary contacts >Pilot Duty >DC operated |
0.75 A |
Auxiliary contacts >General Use >AC |
0.4 A |
Short Circuit Current Rating >Basic Rating >Notes |
0.2 A |
Short Circuit Current Rating >Basic Rating >SCCR |
4 A gG/gL |
Short Circuit Current Rating >Basic Rating >max. Fuse |
|
Short Circuit Current Rating >Basic Rating >max. CB |
Ambient air temperature: Operating range to IEC/EN 60947, PTB: -5°C to +50°C Main circuits terminal capacity solid and flexible conductors with ferrules: When using 2 conductors use equal cross-sections. |
Rated operational current for specified heat dissipation [In] |
|
Heat dissipation per pole, current-dependent [Pvid] |
D300 |
Equipment heat dissipation, current-dependent [Pvid] |
R300 |
Static heat dissipation, non-current-dependent [Pvs] |
240 V/1,5 A 600 V/0,6 A V |
Heat dissipation capacity [Pdiss] |
CB for max. 480 V |
Operating ambient temperature min. |
5 kA |
Operating ambient temperature max. |
15 A |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
15 A |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
|
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
4 A |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
1.9 W |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
5.7 W |
10.2 Strength of materials and parts >10.2.5 Lifting |
0 W |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
0 W |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
-25 °C |
10.3 Degree of protection of ASSEMBLIES |
+50 °C |
10.4 Clearances and creepage distances |
|
10.5 Protection against electric shock |
Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components |
Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections |
Meets the product standard´s requirements. |
10.8 Connections for external conductors |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
10.10 Temperature rise |
Meets the product standard´s requirements. |
10.11 Short-circuit rating |
Does not apply, since the entire switchgear needs to be evaluated. |
10.12 Electromagnetic compatibility |
Meets the product standard´s requirements. |
10.13 Mechanical function |
Does not apply, since the entire switchgear needs to be evaluated. |
Adjustable current range |
Does not apply, since the entire switchgear needs to be evaluated. |
Max. rated operation voltage Ue |
Is the panel builder´s responsibility. |
Mounting method |
Is the panel builder´s responsibility. |
Type of electrical connection of main circuit |
Is the panel builder´s responsibility. |
Number of auxiliary contacts as normally closed contact |
Is the panel builder´s responsibility. |
Number of auxiliary contacts as normally open contact |
Is the panel builder´s responsibility. |
Number of auxiliary contacts as change-over contact |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Release class |
Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Reset function input |
Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Reset function automatic |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Reset function push-button |
|
Product Standards |
|
UL File No. |
2.4 - 4 A |
UL Category Control No. |
690 V |
CSA File No. |
Direct attachment |
CSA Class No. |
Screw connection |
North America Certification |
1 |
Specially designed for North America |
1 |
Suitable for |
0 |
Max. Voltage Rating |
CLASS 10 |
Degree of Protection |
No |
Characteristic curve |
Yes |