alt
alt

XVTL-MP/BX/IC-8/6/16
114557 XVTL-MP/BX/IC-8/6/16
114557

Distribution cabinet, HxWxD=1600x800x600mm, IP55Frame, rear panel, door, roof closed, mounting plate 3 mm, multi-part bottom plates, lifting eyelets, double-bit lock

Distribution cabinet, HxWxD=1600x800x600mm, IP55
Frame, rear panel, door, roof closed, mounting plate 3 mm, multi-part bottom plates, lifting eyelets, double-bit lock

Product range Control centres XVTL
Basic function Combination enclosures
Single unit/Complete unit Complete housing
Degree of Protection IP55 (with door and flange)
Description Fragment basic equipment
Including open cable entries top, prepared for F3A flange
Material Sheet steel 2 mm
Surface finish Polyester powder coating
Phosphated
RAL 7035, light grey
Colour light gray (RAL 7035)
Information about equipment supplied including frame, sheet steel doors, back plate, bottom and top plate, mounting plate, lifting eyelets, cylinder lock and branding strip
Including support frame for the IVS mounting units
including insulating surround and mounted insulated support bracket
Without side walls
Width 800 mm
Height 1600 mm
Depth 600 mm
Standards IEC/EN 60439-1
IEC/EN 60439-3
IEC/EN 62208
Protection class 1
Installation conditions 40 °C (intermittent maximum value)
35 °C (maximum value, 24 h average)
-5 °C (minimum value)
Degree of Protection Indoor installation
Relative humidity IP55 (with door and flange)
Power loss
>Max. admissible heat dissipation, ambient air temperature +35 °C
50% (at 40°C)
Weight 552 W
Material 98 kg
Surface treatment Sheet steel 2 mm
Surface finish Painting, phosphated and polyester powder coating
Colour Polyester powder coating
Phosphated
RAL 7035, light grey
Material characteristics
>Type Door
light gray (RAL 7035)
Material characteristics
>door opening angle
Outside-supported doors with hidden hinges
Can be removed from 90°
Material characteristics
>Door interlock
120° (single mounting)
120° (combination mounting)
Mechanical
>Cable entry
Folding handle with espagnolette lock
Can be fitted with profile cylinder
Three-point interlock
Electrical
>Rated insulation voltage [Ui ]
Various covers allow cable entry from above and/or below
Electrical
>Rated operational voltage [Ue ]
690 V
Electrical
>Rated frequency [f]
415 V
Electrical
>Rated impulse withstand voltage [Uimp]
50 (AC) Hz
Electrical
>Rated operational current [Ie]
6 kV
Electrical
>Overvoltage category/pollution degree
2500 A
Electrical
>Rated short-time withstand current (t=1s) [Icw ]
IV/3
Electrical
>Rated peak withstand current [Ipk ]
65 kA
Electrical
>Max. admissible heat dissipation, ambient air temperature +35 °C
143 kA
Electrical
>Earthings
552 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure, free-standing [PV]
Screw M10: 50 x 106 A2s (base frame, main earthing)
Taptite screw M6: 3.9 × 106 A2s (enclosure side plate, back plate)
M6 weld stud: 50 × 106 A2s (door)
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure, free-standing [PV]
263 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure, free-standing [PV]
248 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV]
235 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure for wall mounting [PV]
246 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure for wall mounting [PV]
236 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure, free-standing [PV]
232 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure, free-standing [PV]
527 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure, free-standing [PV]
498 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV]
472 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure for wall mounting [PV]
494 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure for wall mounting [PV]
473 W
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
466 W
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Not applicable.
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
Not applicable.
10.2 Strength of materials and parts
>10.2.5 Lifting
Not relevant to indoor installations.
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
Met; assembled and secured as per the latest applicable instruction leaflet.
10.2 Strength of materials and parts
>10.2.7 Inscriptions
IK10
10.3 Degree of protection of ASSEMBLIES Meets the product standard´s requirements.
10.4 Clearances and creepage distances IP55
10.5 Protection against electric shock Is the panel builder´s responsibility.
10.6 Incorporation of switching devices and components < 0.1 Ω; meets the product standard´s requirements.
10.7 Internal electrical circuits and connections Is the panel builder´s responsibility.
10.8 Connections for external conductors Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Ui = 690 V AC
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
6 kV
10.10 Temperature rise Does not apply to metal enclosures.
10.11 Short-circuit rating The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility.
10.13 Mechanical function Is the panel builder´s responsibility.
Width Meets the product standard´s requirements.
Height 800 mm
Depth 1600 mm
Material 600 mm
Material quality Steel
Surface finishing Other
Colour Powder coating
RAL-number Grey
With mounting plate 7035
Mounting plate depth-adjustable Yes
Number of locks No
Floor installation possible 1
Wall fastening possible Yes
Wall build in Yes
Pole fastening No
Tackable No
Number of doors Yes
Suitable for metrical mounting 1
Suitable for outdoor set-up Yes
Pitched roof No
EMC-version No
With glazed door Yes
With ventilation door No
With backside door No
Impact strength No
Degree of protection (IP) IK10
Degree of protection (NEMA) IP55

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.