Distribution cabinet, HxWxD=1600x800x300mm, IP55Frame, rear panel, door, roof closed, mounting plate 3 mm, multi-part bottom plates, lifting eyelets, double-bit lock
Distribution cabinet, HxWxD=1600x800x300mm, IP55
Frame, rear panel, door, roof closed, mounting plate 3 mm, multi-part bottom plates, lifting eyelets, double-bit lock
| Product range | Control centres XVTL |
| Basic function | Combination enclosures |
| Single unit/Complete unit | Complete housing |
| Degree of Protection | IP55 (with door and flange) |
| Description | Fragment basic equipment Including open cable entries top, prepared for F3A flange |
| Material | Sheet steel 2 mm |
| Surface finish | Polyester powder coating Phosphated RAL 7035, light grey |
| Colour | light gray (RAL 7035) |
| Information about equipment supplied | including frame, sheet steel doors, back plate, bottom and top plate, mounting plate, lifting eyelets, cylinder lock and branding strip Including support frame for the IVS mounting units including insulating surround and mounted insulated support bracket Without side walls |
| Width | 800 mm |
| Height | 1600 mm |
| Depth | 300 mm |
| Standards | IEC/EN 60439-1 IEC/EN 60439-3 IEC/EN 62208 |
| Protection class | 1 |
| Installation conditions | 40 °C (intermittent maximum value) 35 °C (maximum value, 24 h average) -5 °C (minimum value) |
| Degree of Protection | Indoor installation |
| Relative humidity | IP55 (with door and flange) |
| Power loss >Max. admissible heat dissipation, ambient air temperature +35 °C |
50% (at 40°C) |
| Weight | 389 W |
| Material | 93 kg |
| Surface treatment | Sheet steel 2 mm |
| Surface finish | Painting, phosphated and polyester powder coating |
| Colour | Polyester powder coating Phosphated RAL 7035, light grey |
| Material characteristics >Type Door |
light gray (RAL 7035) |
| Material characteristics >door opening angle |
Outside-supported doors with hidden hinges Can be removed from 90° |
| Material characteristics >Door interlock |
120° (single mounting) 120° (combination mounting) |
| Mechanical >Cable entry |
Folding handle with espagnolette lock Can be fitted with profile cylinder Three-point interlock |
| Electrical >Rated insulation voltage [Ui ] |
Various covers allow cable entry from above and/or below |
| Electrical >Rated operational voltage [Ue ] |
690 V |
| Electrical >Rated frequency [f] |
415 V |
| Electrical >Rated impulse withstand voltage [Uimp] |
50 (AC) Hz |
| Electrical >Rated operational current [Ie] |
6 kV |
| Electrical >Overvoltage category/pollution degree |
2500 A |
| Electrical >Rated short-time withstand current (t=1s) [Icw ] |
IV/3 |
| Electrical >Rated peak withstand current [Ipk ] |
65 kA |
| Electrical >Max. admissible heat dissipation, ambient air temperature +35 °C |
143 kA |
| Electrical >Earthings |
389 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure, free-standing [PV] |
Screw M10: 50 x 106 A2s (base frame, main earthing) Taptite screw M6: 3.9 × 106 A2s (enclosure side plate, back plate) M6 weld stud: 50 × 106 A2s (door) |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure, free-standing [PV] |
185 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure, free-standing [PV] |
177 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV] |
163 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure for wall mounting [PV] |
154 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure for wall mounting [PV] |
144 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure, free-standing [PV] |
137 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure, free-standing [PV] |
372 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure, free-standing [PV] |
356 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV] |
328 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure for wall mounting [PV] |
308 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure for wall mounting [PV] |
289 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
274 W |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Not applicable. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Not applicable. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Not relevant to indoor installations. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Met; assembled and secured as per the latest applicable instruction leaflet. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
IK10 |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | IP55 |
| 10.5 Protection against electric shock | Is the panel builder´s responsibility. |
| 10.6 Incorporation of switching devices and components | < 0.1 Ω; meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Is the panel builder´s responsibility. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Ui = 690 V AC |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
6 kV |
| 10.10 Temperature rise | Does not apply to metal enclosures. |
| 10.11 Short-circuit rating | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Width | Meets the product standard´s requirements. |
| Height | 800 mm |
| Depth | 1600 mm |
| Material | 300 mm |
| Material quality | Steel |
| Surface finishing | Other |
| Colour | Powder coating |
| RAL-number | Grey |
| With mounting plate | 7035 |
| Mounting plate depth-adjustable | Yes |
| Number of locks | No |
| Floor installation possible | 1 |
| Wall fastening possible | Yes |
| Wall build in | Yes |
| Pole fastening | No |
| Tackable | No |
| Number of doors | Yes |
| Suitable for metrical mounting | 1 |
| Suitable for outdoor set-up | Yes |
| Pitched roof | No |
| EMC-version | No |
| With glazed door | Yes |
| With ventilation door | No |
| With backside door | No |
| Impact strength | No |
| Degree of protection (IP) | IK10 |
| Degree of protection (NEMA) | IP55 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
