T5-4-15164/I5/SVB
223020 T5-4-15164/I5/SVB
223020

Main switch, T5, 100 A, surface mounting, 4 contact unit(s), 6 pole, 1 N/O, 1 N/C, Emergency switching off function, With red rotary handle and yellow locking ring
Main switch, Product range: Main switch, maintenance switch, Repair switch, Part group reference: T5, Stop Function: Emergency switching off function, With red rotary handle and yellow locking ring, 6 pole, Degree of Protection: IP65, Design: surface mounting, Switching angle: 90 °, Motor rating AC-23A, 50 - 60 Hz 400 V: P = 55 kW, Rated uninterrupted current: Iu = 100 A, 4 contact unit(s), Standards: IEC/EN 60947, VDE 0660, IEC/EN 60204, Switch-disconnector according to IEC/EN 60947-3

Product range	Main switch maintenance switch Repair switch
Part group reference	T5
Stop Function	Emergency switching off function
Number of poles	With red rotary handle and yellow locking ring
Degree of Protection	6 pole
Design	1 N/O
Contact sequence	1 N/C
Switching angle	IP65
Design number
Function	surface mounting
400 V [P]
Rated uninterrupted current [Iu]
Note on rated uninterrupted current !u	90 °
Number of contact units	15164
Standards
Climatic proofing	55 kW
Ambient temperature >Enclosed	100 A
Overvoltage category/pollution degree	Rated uninterrupted current Iu is specified for max. cross-section.
Rated impulse withstand voltage [Uimp]	4 contact unit(s)
Mechanical shock resistance	IEC/EN 60947, VDE 0660, IEC/EN 60204 Switch-disconnector according to IEC/EN 60947-3
Mounting position	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mechanical variables >Number of poles	-25 - +40 °C
Mechanical variables >Auxiliary contacts 1 N/O Mechanical variables >Auxiliary contacts 1 N/C Electrical characteristics >Rated operational voltage [Ue]	III/3
Electrical characteristics >Rated uninterrupted current [Iu]	6000 V AC
Electrical characteristics >Note on rated uninterrupted current !u	15 g
Load rating with intermittent operation, class 12 >AB 25 % DF	As required
Load rating with intermittent operation, class 12 >AB 40 % DF	6 pole
Load rating with intermittent operation, class 12 >AB 60 % DF	1 N/O
Short-circuit rating >Fuse	1 N/C
Rated short-time withstand current (1 s current) [Icw ]	690 V AC
Note on rated short-time withstand current lcw	100 A
Rated conditional short-circuit current [Iq]	Rated uninterrupted current Iu is specified for max. cross-section.
cos ϕ rated making capacity as per IEC 60947-3	2 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >230 V	1.6 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >400/415 V	1.3 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >500 V	100 A gG/gL
Rated breaking capacity cos ϕ to IEC 60947-3 >690 V	1700 Arms
Safe isolation to EN 61140 >between the contacts	Current for a time of 1 second
Safe isolation to EN 61140 >Current heat loss per contact at Ie	2 kA
Safe isolation to EN 61140 >Current heat loss per auxiliary circuit at Ie (AC-15/230 V)	950 A
Lifespan, mechanical [Operations]	760 A
Maximum operating frequency [Operations/h]	740 A
AC >AC-3 >Rating, motor load switch [P] >220 V 230 V [P]	590 A
AC >AC-3 >Rating, motor load switch [P] >230 V Star-delta [P]	420 A
AC >AC-3 >Rating, motor load switch [P] >400 V 415 V [P]	440 V AC
AC >AC-3 >Rating, motor load switch [P] >400 V Star-delta [P]	7.5 W
AC >AC-3 >Rating, motor load switch [P] >500 V [P]	7.5 CO
AC >AC-3 >Rating, motor load switch [P] >500 V Star-delta [P]	> 0.5 x 106
AC >AC-3 >Rating, motor load switch [P] >690 V [P]	1200
AC >AC-3 >Rating, motor load switch [P] >690 V Star-delta [P]	22 kW
AC >AC-3 >Rated operational current motor load switch >230 V [Ie]	30 kW
AC >AC-3 >Rated operational current motor load switch >230 V star-delta [Ie]	30 kW
AC >AC-3 >Rated operational current motor load switch >400V 415 V [Ie]	45 kW
AC >AC-3 >Rated operational current motor load switch >400 V star-delta [Ie]	30 kW
AC >AC-3 >Rated operational current motor load switch >500 V [Ie ]	45 kW
AC >AC-3 >Rated operational current motor load switch >500 V star-delta [Ie ]	15 kW
AC >AC-3 >Rated operational current motor load switch >690 V [Ie]	22 kW
AC >AC-3 >Rated operational current motor load switch >690 V star-delta [Ie]	71 A
AC >AC-21A >Rated operational current switch >440 V [Ie]	100 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >230 V [P]	55 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >400 V 415 V [P]	95.3 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >500 V [P]	44 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >690 V [P]	76.2 A
AC >AC-23A >Rated operational current motor load switch >230 V [Ie]	17 A
AC >AC-23A >Rated operational current motor load switch >400 V 415 V [Ie]	29.4 A
AC >AC-23A >Rated operational current motor load switch >500 V [Ie]	100 A
AC >AC-23A >Rated operational current motor load switch >690 V [Ie]	30 kW
DC >DC-1, Load-break switches L/R = 1 ms >Rated operational current [Ie]	55 kW
DC >DC-1, Load-break switches L/R = 1 ms >Voltage per contact pair in series	37 kW
Control circuit reliability at 24 V DC, 10 mA [Fault probability]	30 kW
Solid or stranded	100 A
Flexible with ferrules to DIN 46228	100 A
Terminal screw	55 A
Tightening torque for terminal screw	32 A
Notes	80 A
Terminal capacity >Terminal screw	60 V
Rated operational current for specified heat dissipation [In]	< 10 -5, < 1 fault in 100000 operations HF
Heat dissipation per pole, current-dependent [Pvid]	1 x (2,5 - 35) 2 x (2,5 - 16) mm2
Equipment heat dissipation, current-dependent [Pvid]	1 x (1 - 25) 2 x (1.5 - 10) mm2
Static heat dissipation, non-current-dependent [Pvs]	M6
Heat dissipation capacity [Pdiss]	4 Nm
Operating ambient temperature min.	B10d values as per EN ISO 13849-1, table C1
Operating ambient temperature max.	M6
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	100 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	7.5 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	-25 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	+40 °C
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	UV resistance only in connection with protective shield.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Version as main switch	Is the panel builder´s responsibility.
Version as maintenance-/service switch	Is the panel builder´s responsibility.
Version as safety switch	Is the panel builder´s responsibility.
Version as emergency stop installation	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Version as reversing switch	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of switches	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Max. rated operation voltage Ue AC	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated operating voltage	Yes
Rated permanent current Iu	Yes
Rated permanent current at AC-23, 400 V	No
Rated permanent current at AC-21, 400 V	Yes
Rated operation power at AC-3, 400 V	No
Rated short-time withstand current lcw	1
Rated operation power at AC-23, 400 V	690 V
Switching power at 400 V	690 - 690 V
Conditioned rated short-circuit current Iq	100 A
Number of poles	100 A
Number of auxiliary contacts as normally closed contact	100 A
Number of auxiliary contacts as normally open contact	30 kW
Number of auxiliary contacts as change-over contact	1.7 kA
Motor drive optional	55 kW
Motor drive integrated	55 kW
Voltage release optional	2 kA
Device construction	6
Suitable for ground mounting	1
Suitable for front mounting 4-hole	1
Suitable for front mounting centre	0
Suitable for distribution board installation	No
Suitable for intermediate mounting	No
Colour control element	No
Type of control element	Complete device in housing
Interlockable	Yes
Type of electrical connection of main circuit	No
Degree of protection (IP), front side	No
Degree of protection (NEMA)	No

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.