T3-4-8344/EZ
020595 T3-4-8344/EZ
020595

On-Off switch, T3, 32 A, centre mounting, 4 contact unit(s), 8-pole, with black thumb grip and front plate
On-Off switch, Product range: On-Off switch, Part group reference: T3, with black thumb grip and front plate, 8-pole, Degree of Protection: Front IP65, Design: centre mounting, Switching angle: 90 °, Switching performance: maintained, front plate: 0-1, Motor rating AC-23A, 50 - 60 Hz 400 V: P = 15 kW, Rated uninterrupted current: Iu = 32 A, 4 contact unit(s), Standards: IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL, Switch-disconnector according to IEC/EN 60947-3

Product range	On-Off switch
Part group reference	T3
Number of poles	with black thumb grip and front plate
Degree of Protection	8-pole
Design	Front IP65
Contact sequence	centre mounting
Switching angle
Switching performance
Design number	90 °
Front plate no.	maintained
front plate	8344
400 V [P]
Rated uninterrupted current [Iu]	0-1
Note on rated uninterrupted current !u	15 kW
Number of contact units	32 A
Standards	Rated uninterrupted current Iu is specified for max. cross-section.
Climatic proofing	4 contact unit(s)
Ambient temperature >Open	IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL Switch-disconnector according to IEC/EN 60947-3
Ambient temperature >Enclosed	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Overvoltage category/pollution degree	-25 - +50 °C
Rated impulse withstand voltage [Uimp]	-25 - +40 °C
Mechanical shock resistance	III/3
Mounting position	6000 V AC
Mechanical variables >Number of poles	15 g
Electrical characteristics >Rated operational voltage [Ue]	As required
Electrical characteristics >Rated uninterrupted current [Iu]	8-pole
Electrical characteristics >Note on rated uninterrupted current !u	690 V AC
Load rating with intermittent operation, class 12 >AB 25 % DF	32 A
Load rating with intermittent operation, class 12 >AB 40 % DF	Rated uninterrupted current Iu is specified for max. cross-section.
Load rating with intermittent operation, class 12 >AB 60 % DF	2 x Ie
Short-circuit rating >Fuse	1.6 x Ie
Rated short-time withstand current (1 s current) [Icw ]	1.3 x Ie
Note on rated short-time withstand current lcw	35 A gG/gL
Rated conditional short-circuit current [Iq]	650 Arms
cos ϕ rated making capacity as per IEC 60947-3	Current for a time of 1 second
Rated breaking capacity cos ϕ to IEC 60947-3 >230 V	1 kA
Rated breaking capacity cos ϕ to IEC 60947-3 >400/415 V	320 A
Rated breaking capacity cos ϕ to IEC 60947-3 >500 V	260 A
Rated breaking capacity cos ϕ to IEC 60947-3 >690 V	260 A
Safe isolation to EN 61140 >between the contacts	240 A
Safe isolation to EN 61140 >Current heat loss per contact at Ie	170 A
Safe isolation to EN 61140 >Current heat loss per auxiliary circuit at Ie (AC-15/230 V)	440 V AC
Lifespan, mechanical [Operations]	1.1 W
Maximum operating frequency [Operations/h]	1.1 CO
AC >AC-3 >Rating, motor load switch [P] >220 V 230 V [P]	> 0.5 x 106
AC >AC-3 >Rating, motor load switch [P] >230 V Star-delta [P]	1200
AC >AC-3 >Rating, motor load switch [P] >400 V 415 V [P]	5.5 kW
AC >AC-3 >Rating, motor load switch [P] >400 V Star-delta [P]	7.5 kW
AC >AC-3 >Rating, motor load switch [P] >500 V [P]	11 kW
AC >AC-3 >Rating, motor load switch [P] >500 V Star-delta [P]	15 kW
AC >AC-3 >Rating, motor load switch [P] >690 V [P]	15 kW
AC >AC-3 >Rating, motor load switch [P] >690 V Star-delta [P]	18.5 kW
AC >AC-3 >Rated operational current motor load switch >230 V [Ie]	11 kW
AC >AC-3 >Rated operational current motor load switch >230 V star-delta [Ie]	22 kW
AC >AC-3 >Rated operational current motor load switch >400V 415 V [Ie]	23.7 A
AC >AC-3 >Rated operational current motor load switch >400 V star-delta [Ie]	32 A
AC >AC-3 >Rated operational current motor load switch >500 V [Ie ]	23.7 A
AC >AC-3 >Rated operational current motor load switch >500 V star-delta [Ie ]	32 A
AC >AC-3 >Rated operational current motor load switch >690 V [Ie]	23.7 A
AC >AC-3 >Rated operational current motor load switch >690 V star-delta [Ie]	32 A
AC >AC-21A >Rated operational current switch >440 V [Ie]	14.7 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >230 V [P]	25.5 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >400 V 415 V [P]	32 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >500 V [P]	7.5 kW
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >690 V [P]	15 kW
AC >AC-23A >Rated operational current motor load switch >230 V [Ie]	15 kW
AC >AC-23A >Rated operational current motor load switch >400 V 415 V [Ie]	15 kW
AC >AC-23A >Rated operational current motor load switch >500 V [Ie]	32 A
AC >AC-23A >Rated operational current motor load switch >690 V [Ie]	32 A
DC >DC-1, Load-break switches L/R = 1 ms >Rated operational current [Ie]	26.4 A
DC >DC-1, Load-break switches L/R = 1 ms >Voltage per contact pair in series	17 A
DC >DC-21A [Ie ] >Rated operational current [Ie]	25 A
DC >DC-21A [Ie ] >Contacts	60 V
DC >DC-23A, motor load switch L/R = 15 ms >24 V >Rated operational current [Ie]	1 A
DC >DC-23A, motor load switch L/R = 15 ms >24 V >Contacts	1 Quantity
DC >DC-23A, motor load switch L/R = 15 ms >48 V >Rated operational current [Ie]	25 A
DC >DC-23A, motor load switch L/R = 15 ms >48 V >Contacts	1 Quantity
DC >DC-23A, motor load switch L/R = 15 ms >60 V >Rated operational current [Ie]	25 A
DC >DC-23A, motor load switch L/R = 15 ms >60 V >Contacts	2 Quantity
DC >DC-23A, motor load switch L/R = 15 ms >120 V >Rated operational current [Ie]	25 A
DC >DC-23A, motor load switch L/R = 15 ms >120 V >Contacts	3 Quantity
DC >DC-23A, motor load switch L/R = 15 ms >240 V >Rated operational current [Ie]	12 A
DC >DC-23A, motor load switch L/R = 15 ms >240 V >Contacts	3 Quantity
DC >DC-13, Control switches L/R = 50 ms >Rated operational current [Ie]	5 A
DC >DC-13, Control switches L/R = 50 ms >Voltage per contact pair in series	5 Quantity
Control circuit reliability at 24 V DC, 10 mA [Fault probability]	20 A
Solid or stranded	24 V
Flexible with ferrules to DIN 46228	< 10 -5, < 1 fault in 100000 operations HF
Terminal screw	1 x (1 - 6) 2 x (1 - 6) mm2
Tightening torque for terminal screw	1 x (0.75 - 4) 2 x (0.75 - 4) mm2
Notes	M4
Contacts >Rated operational voltage [Ue]	1.6 Nm
Contacts >Rated uninterrupted current max. >Main conducting paths >General use	B10d values as per EN ISO 13849-1, table C1
Contacts >Rated uninterrupted current max. >Auxiliary contacts >General Use [IU]	600 V AC
Contacts >Rated uninterrupted current max. >Auxiliary contacts >Pilot Duty	25 A
Switching capacity >Maximum motor rating >Single-phase >120 V AC	10 A
Switching capacity >Maximum motor rating >Single-phase >200 V AC	A 600 P 600
Switching capacity >Maximum motor rating >Single-phase >240 V AC	1.5 HP
Switching capacity >Maximum motor rating >Three-phase >200 V AC	3 HP
Switching capacity >Maximum motor rating >Three-phase >240 V AC	3 HP
Switching capacity >Maximum motor rating >Three-phase >480 V AC	3 HP
Switching capacity >Maximum motor rating >Three-phase >600 V AC	3 HP
Short Circuit Current Rating >Basic Rating	7.5 HP
Short Circuit Current Rating >max. Fuse	10 HP
Short Circuit Current Rating >High fault rating	5 kA
Short Circuit Current Rating >max. Fuse	40 A
Terminal capacity >Solid or flexible conductor with ferrule	10 kA
Terminal capacity >Terminal screw	40, Class J A
Terminal capacity >Tightening torque	14 - 10 AWG
Rated operational current for specified heat dissipation [In]	M4
Heat dissipation per pole, current-dependent [Pvid]	17.7 lb-in
Equipment heat dissipation, current-dependent [Pvid]	32 A
Static heat dissipation, non-current-dependent [Pvs]	1.1 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	0 W
Operating ambient temperature max.	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	-25 °C
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	+50 °C
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	UV resistance only in connection with protective shield.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.13 Mechanical function	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Version as main switch	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Version as maintenance-/service switch	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Version as safety switch	No
Version as emergency stop installation	No
Version as reversing switch	No
Number of switches	No
Max. rated operation voltage Ue AC	No
Rated operating voltage	1
Rated permanent current Iu	690 V
Rated permanent current at AC-23, 400 V	690 - 690 V
Rated permanent current at AC-21, 400 V	32 A
Rated operation power at AC-3, 400 V	32 A
Rated short-time withstand current lcw	32 A
Rated operation power at AC-23, 400 V	11 kW
Switching power at 400 V	0.65 kA
Conditioned rated short-circuit current Iq	15 kW
Number of poles	15 kW
Number of auxiliary contacts as normally closed contact	1 kA
Number of auxiliary contacts as normally open contact	8
Number of auxiliary contacts as change-over contact	0
Motor drive optional	0
Motor drive integrated	0
Voltage release optional	No
Device construction	No
Suitable for ground mounting	No
Suitable for front mounting 4-hole	Built-in device fixed built-in technique
Suitable for front mounting centre	No
Suitable for distribution board installation	No
Suitable for intermediate mounting	Yes
Colour control element	No
Type of control element	No
Interlockable	Black
Type of electrical connection of main circuit	Toggle
Degree of protection (IP), front side	No
Degree of protection (NEMA)	Screw connection
Product Standards	IP65
UL File No.	12
UL Category Control No.	UL 60947-4-1;CSA - C22.2 No. 60947-4-1-14; CSA-C22.2 No. 94; IEC/EN 60947-3; CE marking
CSA File No.	E36332
CSA Class No.	NLRV
North America Certification	12528
Suitable for	3211-07
Degree of Protection	UL listed, CSA certified

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.