Soft starter, 105 A, 200 - 600 V AC, Us= 24 V DC, Frame size RSoft starter, Description: With internal bypass contacts, Function: Soft starters for three-phase loads, Mains supply voltage (50/60 Hz): ULN= 200 - 600 V AC, Supply voltage: Us= 24 V DC, Control voltage: UC= 24 V DC, Assigned motor rating (Standard connection, In-Line) at 400 V, 50 Hz: P= 55 kW, at 460 V, 60 Hz: P= 75 HP, Rated operational current AC-53: Ie= 105 A, Startup class: CLASS 10 (star-delta replacement), CLASS 20 (heavy starting duty 3 x Ie for 45 s), CLASS 30 (6 x Ie for 30 s), Rated operational voltage: Ue= 200 V, 230 V, 400 V, 480 V, 600 V, Connection to SmartWire-DT: no, Frame size: R, Standards: IEC/EN 60947-4-2, UL 508, CSA22.2-14-1995, GB14048
Soft starter, 105 A, 200 - 600 V AC, Us= 24 V DC, Frame size R
Soft starter, Description: With internal bypass contacts, Function: Soft starters for three-phase loads, Mains supply voltage (50/60 Hz): ULN= 200 - 600 V AC, Supply voltage: Us= 24 V DC, Control voltage: UC= 24 V DC, Assigned motor rating (Standard connection, In-Line) at 400 V, 50 Hz: P= 55 kW, at 460 V, 60 Hz: P= 75 HP, Rated operational current AC-53: Ie= 105 A, Startup class: CLASS 10 (star-delta replacement), CLASS 20 (heavy starting duty 3 x Ie for 45 s), CLASS 30 (6 x Ie for 30 s), Rated operational voltage: Ue= 200 V, 230 V, 400 V, 480 V, 600 V, Connection to SmartWire-DT: no, Frame size: R, Standards: IEC/EN 60947-4-2, UL 508, CSA22.2-14-1995, GB14048
| Description | With internal bypass contacts |
| Function | Soft starters for three-phase loads |
| Mains supply voltage (50/60 Hz) [ULN] | 200 - 600 V AC |
| Supply voltage [Us] | 24 V DC |
| Control voltage [UC] | 24 V DC |
| at 400 V, 50 Hz [P] | |
| at 460 V, 60 Hz [P] | 55 kW |
| AC-53 [Ie] | 75 HP |
| Startup class | |
| Rated operational voltage [Ue] | 105 A |
| Connection to SmartWire-DT | CLASS 10 (star-delta replacement) CLASS 20 (heavy starting duty 3 x Ie for 45 s) CLASS 30 (6 x Ie for 30 s) |
| Frame size | 200 V 230 V 400 V 480 V 600 V |
| Standards | no |
| Approvals | R |
| Approvals | |
| Climatic proofing | IEC/EN 60947-4-2 UL 508 CSA22.2-14-1995 GB14048 |
| Ambient temperature >Operation [ϑ] |
CE |
| Ambient temperature >Storage [ϑ] |
UL CSA C-Tick CCC |
| Altitude | Damp heat, constant, to IEC 60068-2-3 Damp heat, cyclic, to IEC 60068-2-10 |
| Mounting position | -30 - +50 °C |
| Degree of protection >Degree of Protection |
-50 - +70 °C |
| Degree of protection >Integrated |
0 - 2000 m, above that each 100 m 0.5% Derating m |
| Protection against direct contact | As required |
| Overvoltage category/pollution degree | IP20 (terminals IP00) |
| Shock resistance | Protection type IP40 can be achieved on all sides with covers SS-IP20-N. |
| Radio interference level (IEC/EN 55011) | Finger- and back-of-hand proof |
| Static heat dissipation, non-current-dependent [Pvs] | II/3 |
| Weight | 15 g |
| Rated operating voltage [Ue] | A |
| Supply frequency [fLN] | 47 W |
| Rated operational current [Ie
] >AC-53 [Ie] |
4.8 kg |
| Assigned motor rating (Standard connection, In-Line) >at 230 V, 50 Hz [P] |
|
| Assigned motor rating (Standard connection, In-Line) >at 400 V, 50 Hz [P] |
200 - 600 V AC |
| Assigned motor rating (Standard connection, In-Line) >at 500 V, 50 Hz [P] |
50/60 Hz |
| Assigned motor rating (Standard connection, In-Line) >at 200 V, 60 Hz [P] |
105 A |
| Assigned motor rating (Standard connection, In-Line) >at 230 V, 60 Hz [P] |
30 kW |
| Assigned motor rating (Standard connection, In-Line) >at 460 V, 60 Hz [P] |
55 kW |
| Assigned motor rating (Standard connection, In-Line) >at 600 V, 60 Hz [P] |
55 kW |
| Overload cycle to IEC/EN 60947-4-2 >AC-53a |
30 HP |
| Overload cycle to IEC/EN 60947-4-2 >Internal bypass contacts |
40 HP |
| Short-circuit rating >Type “1” coordination |
75 HP |
| Cable lengths >Solid |
100 HP |
| Cable lengths >Flexible with ferrule |
105 A: AC-53a: 4.0 - 32: 99 - 3 |
| Cable lengths >Stranded |
✓ |
| Cable lengths >Solid or stranded |
NZMN2-S125 |
| Cable lengths >Tightening torque |
|
| Cable lengths >Screwdriver (PZ: Pozidriv) |
1 x (2.5 - 35) mm2 |
| Control cables >Solid |
1 x (2.5 - 35) mm2 |
| Control cables >Flexible with ferrule |
1 x (2.5 - 95) mm2 |
| Control cables >Stranded |
1 x (14 - 4/0) AWG |
| Control cables >Solid or stranded |
11.3 Nm |
| Control cables >Tightening torque |
4 mm Innensechskant mm |
| Control cables >Screwdriver |
1 x (2.5 - 4) 2 x (1.0 - 2.5) mm2 |
| Digital inputs >Control voltage >DC-operated |
1 x (2.5 - 4) 2 x (1.0 - 2.5) mm2 |
| Digital inputs >Current consumption 24 V >External 24 V |
1 x (2.5 - 4) 2 x (1.0 - 2.5) mm2 |
| Digital inputs >Current consumption 24 V >External 24 V (no-load) |
49 x (12 - 14) 2 x (12 - 14) AWG |
| Digital inputs >Pick-up voltage >DC-operated |
0.4 Nm |
| Digital inputs >Drop-out voltage [x Us ] >DC operated >Drop-out voltage, DC-operated, max. |
0,6 x 3,5 mm |
| Digital inputs >Pick-up time >DC operated |
|
| Digital inputs >Drop-out time >DC operated |
24 V DC +10 %/- 10 % V DC |
| Regulator supply >Voltage [Us] |
150 mA |
| Regulator supply >Current consumption [Ie] |
100 mA |
| Regulator supply >Current consumption at peak performance (close bypass) at 24 V DC [IPeak] |
21.6 - 26.4 V DC |
| Regulator supply >Notes |
3 V DC |
| Relay outputs >Number |
100 ms |
| Relay outputs >of which programmable |
100 ms |
| Relay outputs >Voltage range |
24 V DC +10 %/- 10 % V |
| Relay outputs >AC-11 current range |
1000 mA |
| Ramp times >Acceleration >Ramp time, max. |
10/150 A/ms |
| Ramp times >Deceleration |
External supply voltage |
| Start voltage (= turn-off voltage) >Start voltage, max. |
2 |
| Start pedestal >Start voltage, max. |
2 |
| Kickstart >Voltage >Kickstart voltage, max. |
120 V AC/DC V AC |
| Kickstart >Duration >50 Hz >Kickstart Duration 50 Hz max. |
3 A, AC-11 A |
| Kickstart >Duration >60 Hz >Kickstart Duration 60 Hz max. |
|
| Fields of application >Fields of application |
180 s |
| Fields of application >3-phase motors |
0 - 60 s |
| Fast switching (semiconductor contactor) | 85 % |
| Soft start function | 85 % |
| Reversing starter | 100 % |
| Suppression of closing transients | 2000 ms |
| Current limitation | 2000 ms |
| Overload monitoring | Soft starting of three-phase asynchronous motors |
| Underload monitoring | ✓ |
| Fault memory | |
| Suppression of DC components for motors | - (minimum ramp time 1s) |
| Potential isolation between power and control sections | ✓ |
| Communication Interfaces | External solution required (reversing contactor) |
| Rated operational current for specified heat dissipation [In] | ✓ |
| Heat dissipation per pole, current-dependent [Pvid] | ✓ |
| Equipment heat dissipation, current-dependent [Pvid] | ✓ |
| Static heat dissipation, non-current-dependent [Pvs] | ✓ |
| Heat dissipation capacity [Pdiss] | 10 Faults |
| Operating ambient temperature min. | ✓ |
| Operating ambient temperature max. | ✓ |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Modbus RTU |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
|
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
105 A |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
47 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
47 W |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
0 W |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
-30 °C |
| 10.3 Degree of protection of ASSEMBLIES | +50 °C |
| 10.4 Clearances and creepage distances | |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
| 10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
| Rated operation current Ie at 40 °C Tu | Does not apply, since the entire switchgear needs to be evaluated. |
| Rated operating voltage Ue | Is the panel builder´s responsibility. |
| Rated power three-phase motor, inline, at 230 V | Is the panel builder´s responsibility. |
| Rated power three-phase motor, inline, at 400 V | Is the panel builder´s responsibility. |
| Rated power three-phase motor, inside delta, at 230 V | Is the panel builder´s responsibility. |
| Rated power three-phase motor, inside delta, at 400 V | Is the panel builder´s responsibility. |
| Function | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Internal bypass | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| With display | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Torque control | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Rated surrounding temperature without derating | |
| Rated control supply voltage Us at AC 50HZ | |
| Rated control supply voltage Us at AC 60HZ | 105 A |
| Rated control supply voltage Us at DC | 200 - 600 V |
| Voltage type for actuating | 30 kW |
| Integrated motor overload protection | 55 kW |
| Release class | 55 kW |
| Degree of protection (IP) | 90 kW |
| Degree of protection (NEMA) | Single direction |
| Product Standards | Yes |
| UL File No. | No |
| UL Category Control No. | No |
| CSA File No. | 50 °C |
| CSA Class No. | 0 - 0 V |
| North America Certification | 0 - 0 V |
| Suitable for | 24 - 24 V |
| Max. Voltage Rating | DC |
| Degree of Protection | Yes |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
