alt
alt

Illuminated pushbutton actuator, blue, momentaryIlluminated pushbutton actuator, Product range: RMQ16, Single unit, Design: Flat, momentary, Description: without light elements, With base, W2x4,6d; max. 30 V, 1 W, button plate: Blue, Button plate Blank, Degree of Protection: IP65, without bezel, Connection to SmartWire-DT: no, Front dimensions: 25 x 25

Illuminated pushbutton actuator, blue, momentary
Illuminated pushbutton actuator, Product range: RMQ16, Single unit, Design: Flat, momentary, Description: without light elements, With base, W2x4,6d; max. 30 V, 1 W, button plate: Blue, Button plate Blank, Degree of Protection: IP65, without bezel, Connection to SmartWire-DT: no, Front dimensions: 25 x 25

Product range RMQ16
Basic function Illuminated pushbutton actuators
Single unit/Complete unit Single unit
Design Flat
Description momentary
Lens without light elements
With base, W2x4,6d; max. 30 V, 1 W
button plate 116C071
Button plate Blue
Degree of Protection 116C071
Front ring Blank
Connection to SmartWire-DT IP65
Front dimensions without bezel
Standards no
Lifespan, mechanical [Operations] 25 x 25
Operating frequency [Operations/h] IEC/EN 60947
Actuating force > 3 x 106
Degree of protection, IEC/EN 60529 ≦ 3600
Climatic proofing ≦ 4 n
Ambient temperature
>Open
IP65
Ambient temperature
>Enclosed
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Mounting position -25 - +60 °C
Mechanical shock resistance - 25 - 40 °C
Blade terminal As required
Fast-on connectors > 40
according to IEC 60068-2-27
Shock duration 11 ms
Sinusoidal g
Rated impulse withstand voltage [Uimp] 2.8 x 0.8 mm to DIN 46244
Rated insulation voltage [Ui ] 2.8 x 0.8 mm to DIN 46247 and IEC 60760
Overvoltage category/pollution degree 800 V AC
Rated operational voltage [Ue] 250 V
Control circuit reliability
>at 24 V DC/5 mA [HF ]
III/3
Control circuit reliability
>at 5 V DC/1 mA [HF ]
24 V AC
Use of insulated ferrule ISH 2,8 < 10-7 (i.e. 1 failure to 107 operations) Fault probability
Rated operational current for specified heat dissipation [In] < 5 x 10-6 (1 failure in 5 x 106 operations) Fault probability
Heat dissipation per pole, current-dependent [Pvid] >24 V AC/DC recommended
>50 V AC or 120 V DC is mandatory, even on unused blade terminals
Equipment heat dissipation, current-dependent [Pvid] 0 A
Static heat dissipation, non-current-dependent [Pvs] 0 W
Heat dissipation capacity [Pdiss] 0 W
Operating ambient temperature min. 0 W
Operating ambient temperature max. 0 W
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
-25 °C
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
+60 °C
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.5 Lifting
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
Please enquire
10.2 Strength of materials and parts
>10.2.7 Inscriptions
Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Is the panel builder´s responsibility.
10.10 Temperature rise Is the panel builder´s responsibility.
10.11 Short-circuit rating Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility Not applicable.
10.13 Mechanical function Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Colour button Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of command positions The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Construction type lens Blue
Hole diameter 1
Width opening Square
Height opening 16 mm
Type of button 0 mm
Suitable for illumination 0 mm
With protective cover Flat
Labelled Yes
Switching function latching No
Spring-return No
With front ring No
Material front ring Yes
Colour front ring Yes
Degree of protection (IP), front side Plastic
Degree of protection (NEMA), front side Black
Product Standards IP65
UL File No. 1
UL Category Control No. IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CE marking
CSA File No. E29184
CSA Class No. NKCR
North America Certification 46552
Degree of Protection 3211-03

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.