Q25LPV
072371 Q25LPV
072371

Emergency-stop pushbutton, illuminated
Emergency stop/emergency switching off pushbutton, Product range: RMQ16, Single unit, Design: Mushroom-shaped, Diameter: 28 mm, Illumination: Illuminated, Pull-to-release function, Description: Tamper-proof according to ISO 13850, EN 418, Pushbutton remains in pushed position, Ie = 15 mA, Positive pole at X1, No bulb replacement required., Colour Mushroom head: Red, Degree of Protection: IP65, Connection to SmartWire-DT: no, Front dimensions: 25 × 25 mm

Product range	RMQ16
Basic function	Controlled stop pushbuttons/emergency-stop buttons
Single unit/Complete unit	Single unit
Design	Mushroom-shaped
Diameter [⌀]	28 mm
Illumination	Illuminated
Description	Pull-to-release function
Mushroom head	Tamper-proof according to ISO 13850, EN 418 Pushbutton remains in pushed position Ie = 15 mA Positive pole at X1 No bulb replacement required.
Degree of Protection	Red
Connection to SmartWire-DT
Front dimensions	IP65
Standards	no
Lifespan, mechanical [Operations]	25 × 25 mm
Operating frequency [Operations/h]	IEC/EN 60947
Actuating force	> 0.1 x 106
Degree of protection, IEC/EN 60529	≦ 600
Climatic proofing	≦ 25 n
Ambient temperature >Open	IP65
Ambient temperature >Enclosed	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mounting position	-25 - +60 °C
Mechanical shock resistance	- 25 - 40 °C
Terminal capacities	As required
Blade terminal	> 40 according to IEC 60068-2-27 Shock duration 11 ms Sinusoidal g
Fast-on connectors	0.5 - 1.0 mm2
Rated impulse withstand voltage [Uimp]	2.8 x 0.8 mm
Rated insulation voltage [Ui ]	2.8 x 0.8 mm
Overvoltage category/pollution degree	800 V AC
Rated operational voltage [Ue]	250 V
Control circuit reliability >at 24 V DC/5 mA [HF ]	III/3
Control circuit reliability >at 5 V DC/1 mA [HF ]	24 V AC
Use of insulated ferrule ISH 2,8	< 10-7, < 1 fault in 107 operations Fault probability
Rated operational current for specified heat dissipation [In]	< 5 x 10-6, < 1 failure in 5 x 106 operations Fault probability
Heat dissipation per pole, current-dependent [Pvid]	>24 V AC/DC recommended >50 V AC or 120 V DC is mandatory, even on unused blade terminals
Equipment heat dissipation, current-dependent [Pvid]	0 A
Static heat dissipation, non-current-dependent [Pvs]	0 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	0.36 W
Operating ambient temperature max.	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	-25 °C
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	+60 °C
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Please enquire
10.2 Strength of materials and parts >10.2.7 Inscriptions	Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.13 Mechanical function	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Colour button	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Construction type lens	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Diameter cap	Red
Hole diameter	Round
Width opening	28 mm
Height opening	16 mm
Degree of protection (IP)	0 mm
Degree of protection (NEMA)	0 mm
Type of button	IP65
Suitable for illumination	1
Switching function latching	High
Spring-return	Yes
With front ring	Yes
Material front ring	Yes
Colour front ring	No
Suitable for emergency stop	Plastic
Unlocking method	Yellow
Product Standards	Yes
UL File No.	Pull-release
UL Category Control No.	IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CE marking
CSA File No.	E29184
CSA Class No.	NKCR
North America Certification	46552
Degree of Protection	3211-03

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.