Q25LH-GE
090481 Q25LH-GE
090481

Indicator light, raised, yellow
Indicator light, Product range: RMQ16, Single unit, Design: Conical, Description: without light elements, With base, W2x4,6d; max. 30 V, 1 W, Colour Lens: yellow, Degree of Protection: IP65, without bezel, Connection to SmartWire-DT: no, Front dimensions: Front dimensions 25 × 25 mm

Product range	RMQ16
Basic function	Indicator lights
Single unit/Complete unit	Single unit
Design	Conical
Description	without light elements With base, W2x4,6d; max. 30 V, 1 W
Lens	yellow
Lens
Degree of Protection	IP65
Front ring	without bezel
Connection to SmartWire-DT	no
Front dimensions	Front dimensions 25 × 25 mm
Standards	IEC/EN 60947
Degree of protection, IEC/EN 60529	IP65
Climatic proofing	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature >Open	-25 - +60 °C
Ambient temperature >Enclosed	- 25 - 40 °C
Mounting position	As required
Mechanical shock resistance	> 40 according to IEC 60068-2-27 Shock duration 11 ms Sinusoidal g
Terminal capacities	0.5 - 1.0 mm2
Blade terminal	2.8 x 0.8 mm to DIN 46244
Fast-on connectors	2.8 x 0.8 mm to DIN 46247 and IEC 60760
Rated impulse withstand voltage [Uimp]	800 V AC
Rated insulation voltage [Ui ]	250 V
Overvoltage category/pollution degree	III/3
Rated operational voltage [Ue]	24 V AC
Use of insulated ferrule ISH 2,8	>24 V AC/DC recommended >50 V AC or 120 V DC is mandatory, even on unused blade terminals
Rated operational current for specified heat dissipation [In]	0 A
Heat dissipation per pole, current-dependent [Pvid]	0 W
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	0 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	-25 °C
Operating ambient temperature max.	+60 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Please enquire
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Not applicable.
10.11 Short-circuit rating	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Suitable for number of built-in signal lights	1
Colour lens	Yellow
Construction type lens	Square
Hole diameter	16 mm
Width opening	0 mm
Height opening	0 mm
With front ring	Yes
Material front ring	Plastic
Colour front ring	Black
Type of lens	High
Degree of protection (IP), front side	IP65
Product Standards	IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CE marking
UL File No.	E29184
UL Category Control No.	NKCR
CSA File No.	46552
CSA Class No.	3211-03
North America Certification	UL listed, CSA certified
Degree of Protection	UL/CSA Type 1

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.