Key-operated actuator, 3 positions, black, maintainedKey-operated actuator, Product range: RMQ16, Single unit, Design: Key operated, maintained, 3 positions, II, Degree of Protection: IP65, without bezel, Connection to SmartWire-DT: no, Front dimensions: Front dimensions 18 × 18 mm, With 1 key, Degree of Protection: IP65
Key-operated actuator, 3 positions, black, maintained
Key-operated actuator, Product range: RMQ16, Single unit, Design: Key operated, maintained, 3 positions, II, Degree of Protection: IP65, without bezel, Connection to SmartWire-DT: no, Front dimensions: Front dimensions 18 × 18 mm, With 1 key, Degree of Protection: IP65
| Product range | RMQ16 |
| Basic function | Key-operated buttons |
| Single unit/Complete unit | Single unit |
| Design | Key operated |
| Degree of Protection | maintained |
| Front ring | 45° ⥥ 45° |
| Connection to SmartWire-DT | 3 positions |
| Front dimensions | 0 |
| Information about equipment supplied | II |
| Standards | IP65 |
| Lifespan, mechanical [Operations] | without bezel |
| Operating frequency [Operations/h] | no |
| Operating torque | Front dimensions 18 × 18 mm |
| Degree of protection, IEC/EN 60529 | With 1 key |
| Climatic proofing | IEC/EN 60947 |
| Ambient temperature >Open |
> 3 x 106 |
| Ambient temperature >Enclosed |
≦ 1800 |
| Mounting position | ≦ 0.4 Nm |
| Mechanical shock resistance | IP65 |
| Terminal capacities | Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Blade terminal | -25 - +60 °C |
| Fast-on connectors | - 25 - 40 °C |
| Rated impulse withstand voltage [Uimp] | As required |
| Rated insulation voltage [Ui ] | > 40 according to IEC 60068-2-27 Shock duration 11 ms Sinusoidal g |
| Overvoltage category/pollution degree | 0.5 - 1.0 mm2 |
| Rated operational voltage [Ue] | 2.8 x 0.8 mm to DIN 46244 |
| Control circuit reliability >at 24 V DC/5 mA [HF ] |
2.8 x 0.8 mm to DIN 46247 and IEC 60760 |
| Control circuit reliability >at 5 V DC/1 mA [HF ] |
800 V AC |
| Use of insulated ferrule ISH 2,8 | 250 V |
| Rated operational current for specified heat dissipation [In] | III/3 |
| Heat dissipation per pole, current-dependent [Pvid] | 24 V AC |
| Equipment heat dissipation, current-dependent [Pvid] | < 10-7, < 1 failure in 107 operations Fault probability |
| Static heat dissipation, non-current-dependent [Pvs] | < 5 x 10-6, < 1 failure in 5 x 106 operations Fault probability |
| Heat dissipation capacity [Pdiss] | On >24 V AC/DC recommended On >50 V AC or 120 V DC mandatory, also on unoccupied blade terminals |
| Operating ambient temperature min. | 0 A |
| Operating ambient temperature max. | 0 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0 W |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
0 W |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
0 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
-25 °C |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
+60 °C |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Please enquire |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Number of switch positions | Is the panel builder´s responsibility. |
| Type of control element | Not applicable. |
| Suitable for illumination | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Colour control element | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Colour indicator light cap | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Construction type lens | 3 |
| Hole diameter | Key |
| Width opening | No |
| Height opening | Black |
| Switching function latching | Other |
| Spring-return | Square |
| With front ring | 16 mm |
| Material front ring | 0 mm |
| Colour front ring | 0 mm |
| Degree of protection (IP), front side | Yes |
| Degree of protection (NEMA) | No |
| Product Standards | Yes |
| UL File No. | Plastic |
| UL Category Control No. | Black |
| CSA File No. | IP65 |
| CSA Class No. | 1 |
| North America Certification | IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CE marking |
| Degree of Protection | E29184 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
