Illuminated pushbutton actuator, without button plate, maintainedIlluminated pushbutton actuator, Product range: RMQ16, Single unit, Design: Flat, maintained, Description: without light elements, With base, W2x4,6d; max. 30 V, 1 W, Degree of Protection: IP65, Connection to SmartWire-DT: no, Front dimensions: 18 x 18
Illuminated pushbutton actuator, without button plate, maintained
Illuminated pushbutton actuator, Product range: RMQ16, Single unit, Design: Flat, maintained, Description: without light elements, With base, W2x4,6d; max. 30 V, 1 W, Degree of Protection: IP65, Connection to SmartWire-DT: no, Front dimensions: 18 x 18
| Product range | RMQ16 |
| Basic function | Illuminated pushbutton actuators |
| Single unit/Complete unit | Single unit |
| Design | Flat |
| Description | maintained |
| Degree of Protection | without light elements With base, W2x4,6d; max. 30 V, 1 W |
| Connection to SmartWire-DT | IP65 |
| Front dimensions | no |
| Standards | 18 x 18 |
| Lifespan, mechanical [Operations] | IEC/EN 60947 |
| Operating frequency [Operations/h] | > 3 x 106 |
| Actuating force | ≦ 1800 |
| Degree of protection, IEC/EN 60529 | ≦ 4 n |
| Climatic proofing | IP65 |
| Ambient temperature >Open |
Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Ambient temperature >Enclosed |
-25 - +60 °C |
| Mounting position | - 25 - 40 °C |
| Mechanical shock resistance | As required |
| Terminal capacities | > 40 according to IEC 60068-2-27 Shock duration 11 ms Sinusoidal g |
| Blade terminal | 0.5 - 1.0 mm2 |
| Fast-on connectors | 2.8 x 0.8 mm to DIN 46244 |
| Rated impulse withstand voltage [Uimp] | 2.8 x 0.8 mm to DIN 46247 and IEC 60760 |
| Rated insulation voltage [Ui ] | 800 V AC |
| Overvoltage category/pollution degree | 250 V |
| Rated operational voltage [Ue] | III/3 |
| Control circuit reliability >at 24 V DC/5 mA [HF ] |
24 V AC |
| Control circuit reliability >at 5 V DC/1 mA [HF ] |
< 10-7, < 1 faults in 107 switch operations Fault probability |
| Use of insulated ferrule ISH 2,8 | < 5 x 10-6, < 1 failure in 5 x 106 operations Fault probability |
| Rated operational current for specified heat dissipation [In] | >24 V AC/DC recommended >50 V AC or 120 V DC is mandatory, even on unused blade terminals |
| Heat dissipation per pole, current-dependent [Pvid] | 0 A |
| Equipment heat dissipation, current-dependent [Pvid] | 0 W |
| Static heat dissipation, non-current-dependent [Pvs] | 0 W |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | 0 W |
| Operating ambient temperature max. | -25 °C |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+60 °C |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Please enquire |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | Not applicable. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Colour button | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Number of command positions | Without button plate |
| Construction type lens | 1 |
| Hole diameter | Square |
| Width opening | 16 mm |
| Height opening | 0 mm |
| Type of button | 0 mm |
| Suitable for illumination | Flat |
| With protective cover | Yes |
| Labelled | No |
| Switching function latching | No |
| Spring-return | No |
| With front ring | Yes |
| Material front ring | Yes |
| Colour front ring | Plastic |
| Degree of protection (IP), front side | Black |
| Degree of protection (NEMA), front side | IP65 |
| Product Standards | 1 |
| UL File No. | IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CE marking |
| UL Category Control No. | E29184 |
| CSA File No. | NKCR |
| CSA Class No. | 46552 |
| North America Certification | 3211-03 |
| Degree of Protection | UL listed, CSA certified |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
