Door coupling handle, for MCC-V, 90 degree, twistedDoor coupling handle, Product range: Accessories, For use as a main switch to EN 60204 in MCC power distribution systems and with PKZM0 installed when rotated by 90°, Black, For use with: PKZM0, PKZM4
Door coupling handle, for MCC-V, 90 degree, twisted
Door coupling handle, Product range: Accessories, For use as a main switch to EN 60204 in MCC power distribution systems and with PKZM0 installed when rotated by 90°, Black, For use with: PKZM0, PKZM4
| Product range | Accessories |
| Accessories | Door coupling handle |
| For use with | For use as a main switch to EN 60204 in MCC power distribution systems and with PKZM0 installed when rotated by 90° |
| For use with | Black |
| Degree of Protection | PKZM0 PKZM4 |
| Notes | Door coupling handle PKZ0(4) |
| Rated operational current for specified heat dissipation [In] | IP65 |
| Heat dissipation per pole, current-dependent [Pvid] | Plug-in extension shaft PKZ0-XAH can be cut to desired length for mounting depths of 100-240 mm. Carrier with extension shaft included as standard. With ON/OFF switch position and “+” (tripped), lockable. With 3 padlocks, 4 - 8 mm hasp thickness. Cannot be used in combination with VHI20-PKZ0. ZFS... (except for ZFS-(L)TS-NZM) add-on front plates can be used. |
| Equipment heat dissipation, current-dependent [Pvid] | |
| Static heat dissipation, non-current-dependent [Pvs] | 0 A |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | 0 W |
| Operating ambient temperature max. | 0 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0 W |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
-25 °C |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
+55 °C |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Please enquire |
| 10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Lockable | Not applicable. |
| Colour | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Suitable for emergency stop | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| With extension shaft | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Suitable for power circuit breaker | |
| Suitable for switch disconnector | |
| Product Standards | Yes |
| UL File No. | Black |
| UL Category Control No. | No |
| CSA File No. | Yes |
| CSA Class No. | No |
| North America Certification | No |
| Specially designed for North America | UL 508; CSA-C22.2 No. 14; IEC60947-4-1; CE marking |
| Degree of Protection | E36332 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
