PKE-XTUWA-32
138262 PKE-XTUWA-32
138262

Trip block, 8 - 32 A, Motor protection, Connection to SmartWire-DT: yes, For use with: PKE65 basic device
Electronic control unit for motor protection according to IEC60947-4-1, electronic wide-range overload protection (4:1), phase-failure and unbalance protection, adjustable tripping class. Interface for connection to SmartWire-DT. Tool-less mounting with basic device PKE65. ATEX approval

Product range	Accessories
Accessories	Trip blocks
Basic function	Motor protection Motor protection for heavy starting duty
Overload releases [Ir ] >Setting range of overload releases [Ir]
Overload releases [Ir ] >Overload release, min. [Ir]	8 - 32 A
Overload releases [Ir ] >Overload release, max. [Ir ]	8 A
Function	32 A
Rated uninterrupted current = rated operational current [Iu = Ie ]	With overload release
AC-3 >220 V 230 V [P]	32 A
AC-3 >380 V 400 V [P]
AC-3 >440 V [P]	7.5 kW
AC-3 >500 V [P]	15 kW
AC-3 >660 V 690 V [P]	15 kW
For use with	18.5 kW
Connection to SmartWire-DT	30 kW
Motor output/rated motor current	PKE65 basic device
Standards	yes in conjunction with PKE-SWD-SP SmartWire DT PKE module
Climatic proofing	Motor rating Rated motor current AC-3 220 V 230 V 240 V 380 V 400 V 415 V 440 V 500 V 660 V 690 V P I I I I I kW A A A A A 2.2   8.7   -   -   -   - 3   11.5   -   -   -   - 4   14.8   8.5       -   - 5.5   19.6   11.3   10.2   9   - 7.5   26.4   15.2   13.8   12.1   8.8 11   -   21.7   19.8   17.4   12.6 15   -   29.3   26.6   23.4   17 18.5   -   -   -   28.9   20.9 22   -   -   -   -   23.8 30   -   -   -   -   32
Ambient temperature >Storage
Ambient temperature >Open	IEC/EN 60947, VDE 0660,UL, CSA
Ambient temperature >Enclosed	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mounting position	- 40 - 80 °C
Direction of incoming supply	-25 - +55 °C
Degree of protection >Device	- 25 - 40 °C
Degree of protection >Terminations
Protection against direct contact when actuated from front (EN 50274)	as required
Mechanical shock resistance half-sinusoidal shock 10 ms to IEC 60068-2-27	IP20
Altitude	IP00
Rated impulse withstand voltage [Uimp]	Finger and back-of-hand proof
Overvoltage category/pollution degree	25 g
Rated operational voltage [Ue ]	Max. 2000 m
Rated uninterrupted current = rated operational current [Iu = Ie ]
Rated frequency [f]	6000 V AC
Max. operating frequency	III/3
Motor switching capacity >AC-3 (up to 690V)	690 V AC
AC-4 cycle operation >Minimum current flow times	32 A
AC-4 cycle operation >Minimum cut-out periods	40 - 60 Hz
AC-4 cycle operation >Note	60 Ops/h
Temperature compensation >to IEC/EN 60947, VDE 0660	32 A
Temperature compensation >Operating range	500 (Class 5) 700 (Class 10) 900 (Class 15) 1000 (Class 20) ms
Setting range of overload releases	500 ms
short-circuit release	In AC-4 cycle operation, going below the minimum current flow time can cause overheating of the load (motor). For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. ms
Short-circuit release tolerance
Phase-failure sensitivity	- 5…40 °C
Rated operational current for specified heat dissipation [In]	- 25…55 °C
Heat dissipation per pole, current-dependent [Pvid]	0.25 - 1 x Iu
Equipment heat dissipation, current-dependent [Pvid]	Trip block, fixed: 15.5 x Ir delayed approx. 60 ms
Static heat dissipation, non-current-dependent [Pvs]	± 20%
Heat dissipation capacity [Pdiss]	IEC/EN 60947-4-1, VDE 0660 Part 102
Operating ambient temperature min.
Operating ambient temperature max.	32 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	1.3 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	3.9 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	-25 °C
10.2 Strength of materials and parts >10.2.5 Lifting	+55 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Overload release current setting	Is the panel builder´s responsibility.
Initial value of the undelayed short-circuit release - setting range	Is the panel builder´s responsibility.
End value adjustment range undelayed short-circuit release	Is the panel builder´s responsibility.
Rated permanent current Iu	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Voltage type for actuating	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated control supply voltage Us at AC 50HZ	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated control supply voltage Us at AC 60HZ	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated control supply voltage Us at DC
Number of poles
Short-circuit release function	8 - 32 A
With ground fault protection function	96 A
Type of motor protection	384 A
Product Standards	32 A
UL File No.	Self powered
UL Category Control No.	0 - 0 V
CSA File No.	0 - 0 V
CSA Class No.	0 - 0 V
North America Certification	3
Specially designed for North America	Delayed
Characteristic curve	No

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.