P1-32/M4/K1-PR/N/HI11
172782 P1-32/M4/K1-PR/N/HI11
172782

Main switch, P1, 32 A, rear mounting, 3 pole + N, 1 N/O, 1 N/C, Emergency switching off function, Lockable in the 0 (Off) position, With metal shaft for a control panel depth of 400 mm
Main switch, Product range: Main switch, maintenance switch, Repair switch, Part group reference: P1, Stop Function: Emergency switching off function, With red rotary handle and yellow locking ring, Notes: With metal shaft for a control panel depth of 400 mm, 3 pole + N, Locking facility: Lockable in the 0 (Off) position, Degree of Protection: Front IP65, Design: rear mounting, Motor rating AC-23A, 50 - 60 Hz 400 V: P = 15 kW, Rated uninterrupted current: Iu = 32 A, Standards: IEC/EN 60947, VDE 0660, IEC/EN 60204, Switch-disconnector according to IEC/EN 60947-3

Product range	Main switch maintenance switch Repair switch
Part group reference	P1
Stop Function	Emergency switching off function
Notes	with red rotary handle and yellow lock ring (K series)
Number of poles	With metal shaft for a control panel depth of 400 mm
Locking facility	3 pole + N
Degree of Protection	1 N/O
Design	1 N/C
Contact sequence	Lockable in the 0 (Off) position
Front plate no.	Front IP65
400 V [P]	rear mounting
Rated uninterrupted current [Iu]
Note on rated uninterrupted current !u
Standards
Climatic proofing	15 kW
Ambient temperature >Open	32 A
Ambient temperature >Enclosed	Rated uninterrupted current Iu is specified for max. cross-section.
Overvoltage category/pollution degree	IEC/EN 60947, VDE 0660, IEC/EN 60204 Switch-disconnector according to IEC/EN 60947-3
Rated impulse withstand voltage [Uimp]	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mechanical shock resistance	-25 - +50 °C
Mounting position	-25 - +40 °C
Mechanical variables >Number of poles	III/3
Mechanical variables >Auxiliary contacts 1 N/O Mechanical variables >Auxiliary contacts 1 N/C Electrical characteristics >Rated operational voltage [Ue]	6000 V AC
Electrical characteristics >Rated uninterrupted current [Iu]	15 g
Electrical characteristics >Note on rated uninterrupted current !u	As required
Load rating with intermittent operation, class 12 >AB 25 % DF	3 pole + N
Load rating with intermittent operation, class 12 >AB 40 % DF	1 N/O
Load rating with intermittent operation, class 12 >AB 60 % DF	1 N/C
Short-circuit rating >Fuse	690 V AC
Rated short-time withstand current (1 s current) [Icw ]	32 A
Note on rated short-time withstand current lcw	Rated uninterrupted current Iu is specified for max. cross-section.
Rated conditional short-circuit current [Iq]	2 x Ie
cos ϕ rated making capacity as per IEC 60947-3	1.6 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >230 V	1.3 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >400/415 V	50 A gG/gL
Rated breaking capacity cos ϕ to IEC 60947-3 >500 V	640 Arms
Rated breaking capacity cos ϕ to IEC 60947-3 >690 V	Current for a time of 1 second
Safe isolation to EN 61140 >between the contacts	80 kA
Safe isolation to EN 61140 >Current heat loss per contact at Ie	320 A
Safe isolation to EN 61140 >Current heat loss per auxiliary circuit at Ie (AC-15/230 V)	260 A
Lifespan, mechanical [Operations]	300 A
Maximum operating frequency [Operations/h]	290 A
AC >AC-3 >Rating, motor load switch [P] >220 V 230 V [P]	250 A
AC >AC-3 >Rating, motor load switch [P] >400 V 415 V [P]	440 V AC
AC >AC-3 >Rating, motor load switch [P] >500 V [P]	1.8 W
AC >AC-3 >Rating, motor load switch [P] >690 V [P]	0.2 CO
AC >AC-3 >Rated operational current motor load switch >230 V [Ie]	> 0.3 x 106
AC >AC-3 >Rated operational current motor load switch >400V 415 V [Ie]	1200
AC >AC-3 >Rated operational current motor load switch >500 V [Ie ]	7.5 kW
AC >AC-3 >Rated operational current motor load switch >690 V [Ie]	13 kW
AC >AC-21A >Rated operational current switch >440 V [Ie]	18.5 kW
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >230 V [P]	15 kW
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >400 V 415 V [P]	26.4 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >500 V [P]	26.4 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >690 V [P]	23.4 A
AC >AC-23A >Rated operational current motor load switch >230 V [Ie]	14.7 A
AC >AC-23A >Rated operational current motor load switch >400 V 415 V [Ie]	32 A
AC >AC-23A >Rated operational current motor load switch >500 V [Ie]	7.5 kW
AC >AC-23A >Rated operational current motor load switch >690 V [Ie]	15 kW
DC >DC-1, Load-break switches L/R = 1 ms >Rated operational current [Ie]	18.5 kW
DC >DC-1, Load-break switches L/R = 1 ms >Voltage per contact pair in series	15 kW
DC >DC-23A, motor load switch L/R = 15 ms >24 V >Rated operational current [Ie]	32 A
DC >DC-23A, motor load switch L/R = 15 ms >24 V >Contacts	32 A
DC >DC-23A, motor load switch L/R = 15 ms >48 V >Rated operational current [Ie]	30 A
DC >DC-23A, motor load switch L/R = 15 ms >48 V >Contacts	19.8 A
DC >DC-23A, motor load switch L/R = 15 ms >60 V >Rated operational current [Ie]	32 A
DC >DC-23A, motor load switch L/R = 15 ms >60 V >Contacts	60 V
DC >DC-23A, motor load switch L/R = 15 ms >120 V >Rated operational current [Ie]	25 A
DC >DC-23A, motor load switch L/R = 15 ms >120 V >Contacts	1 Quantity
Control circuit reliability at 24 V DC, 10 mA [Fault probability]	25 A
Solid or stranded	2 Quantity
Flexible with ferrules to DIN 46228	25 A
Tightening torque for terminal screw	2 Quantity
Notes	12 A
Rated operational current for specified heat dissipation [In]	3 Quantity
Heat dissipation per pole, current-dependent [Pvid]	< 10 -5, < 1 fault in 100000 operations HF
Equipment heat dissipation, current-dependent [Pvid]	1 x (1,5 - 6) 2 x (1,5 - 6) mm2
Static heat dissipation, non-current-dependent [Pvs]	1 x (1 - 4) 2 x (1 - 4) mm2
Heat dissipation capacity [Pdiss]	1.6 Nm
Operating ambient temperature min.	B10d values as per EN ISO 13849-1, table C1
Operating ambient temperature max.	32 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	1.8 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	-25 °C
10.2 Strength of materials and parts >10.2.5 Lifting	+50 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	UV resistance only in connection with protective shield.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Version as main switch	Is the panel builder´s responsibility.
Version as maintenance-/service switch	Is the panel builder´s responsibility.
Version as safety switch	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Version as emergency stop installation	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Version as reversing switch	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of switches	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Max. rated operation voltage Ue AC	Yes
Rated operating voltage	No
Rated permanent current Iu	No
Rated permanent current at AC-23, 400 V	No
Rated permanent current at AC-21, 400 V	No
Rated operation power at AC-3, 400 V	1
Rated short-time withstand current lcw	690 V
Rated operation power at AC-23, 400 V	690 - 690 V
Switching power at 400 V	32 A
Conditioned rated short-circuit current Iq	32 A
Number of poles	32 A
Number of auxiliary contacts as normally closed contact	13 kW
Number of auxiliary contacts as normally open contact	0.64 kA
Number of auxiliary contacts as change-over contact	15 kW
Motor drive optional	15 kW
Motor drive integrated	80 kA
Voltage release optional	4
Device construction	1
Suitable for ground mounting	1
Suitable for front mounting 4-hole	0
Suitable for front mounting centre	No
Suitable for distribution board installation	No
Suitable for intermediate mounting	No
Colour control element	Built-in device fixed built-in technique
Type of control element	Yes
Interlockable	No
Type of electrical connection of main circuit	No
Degree of protection (IP), front side	No
Degree of protection (NEMA)	Yes

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.