NZML4-ME550
283218 NZML4-ME550
283218

Circuit-breakers 3p 550 A
Circuit-breakers of the NZM..-ME series cover all applications with only four compact sizes and are suitable for the IEC market. The mounting is always flexible due to the modular function groups. With electronic release for the motor protection with phase failure sensitivity. Notes: IEC/EN 60947-4-1, IEC/EN 60947-2, r.m.s. value measurement and thermal memory, adjustable time delay setting to overcome current peaks tr:2-20 at 6xIr as well as infinity (without overload release)

Product range	Circuit-breaker
Protective function	Motor protection
Standard/Approval
Installation type	IEC
Release system	Fixed
Construction size	Electronic release
Description	NZM4
Number of poles	IEC/EN 60947-4-1, IEC/EN 60947-2 The circuit-breaker fulfills all requirements for AC-3 switching category. R.m.s. value measurement and “thermal memory” Adjustable time delay setting to overcome current peaks tr at 6 x Ir also infinity (without overload releases) All AC-3 rating data applies to direct switching by the circuit-breaker under normal operating conditions. If, for example, a contactor takes over AC-3 switching under normal operating conditions, the full rated uninterrupted current applies to the circuit-breaker, In = Iu.
Standard equipment	3 pole
400/415 V 50 Hz [Icu ]	Screw connection
Rated current = rated uninterrupted current [In = Iu]	100 kA
Overload trip [Ir ] 275 - 550 A Short-circuit releases [Irm ] >Non-delayed [Ii = In x …]	550 A
380 V 400 V [P]	275 - 550 A
660 V 690 V [P]	2 - 14
400 V [P]	315 kW
660 V 690 V [P]	560 kW
400 V [Ie ]	315 kW
690 V	560 kW
Standards	544 A
Protection against direct contact	550 A
Climatic proofing	IEC/EN 60947
Ambient temperature >Ambient temperature, storage	Finger and back of hand proof to VDE 0106 Part 100
Ambient temperature >Operation	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mechanical shock resistance (10 ms half-sinusoidal shock) according to IEC 60068-2-27	- 40 - + 70 °C
Safe isolation to EN 61140 >Between auxiliary contacts and main contacts	-25 - +70 °C
Safe isolation to EN 61140 >between the auxiliary contacts	15 (half-sinusoidal shock 11 ms) g
Weight	500 V AC
Mounting position	300 V AC
Direction of incoming supply	0 kg
Degree of protection >Device	Vertical and 90° in all directions   With XFI earth-fault release: - NZM1, N1, NZM2, N2: vertical and 90° in all directions with plug-in unit - NZM1, N1, NZM2, N2: vertical, 90° right/left with withdrawable unit: - NZM3, N3: vertical, 90° right/left - NZM4, N4: vertical with remote operator: - NZM2, N(S)2, NZM3, N(S)3, NZM4, N(S)4: vertical and 90° in all directions
Degree of protection >Enclosures	as required
Degree of protection >Terminations	In the operating controls area: IP20 (basic degree of protection)
Other technical data (sheet catalogue)	With insulating surround: IP40 With door coupling rotary handle: IP66
Rated current = rated uninterrupted current [In = Iu]	Tunnel terminal: IP10 Phase isolator and strip terminal: IP00
Rated surge voltage invariability [Uimp ] >Main contacts	Temperature dependency, Derating
Rated surge voltage invariability [Uimp ] >Auxiliary contacts	550 A
Rated operational voltage [Ue]	8000 V
Overvoltage category/pollution degree	6000 V
Rated insulation voltage [Ui ]	690 V AC
Use in unearthed supply systems	III/3
Rated short-circuit making capacity [Icm ] >240 V [Icm ]	1000 V
Rated short-circuit making capacity [Icm ] >400/415 V [Icm ]	≦ 690 V
Rated short-circuit making capacity [Icm ] >440 V 50/60 Hz [Icm ]	275 kA
Rated short-circuit making capacity [Icm ] >525 V 50/60 Hz [Icm ]	220 kA
Rated short-circuit making capacity [Icm ] >690 V 50/60 H [Ic]	187 kA
Rated short-circuit breaking capacity Icn [Icn ] >Icu to IEC/EN 60947 test cycle O-t-CO [Icu] >240 V 50/60 Hz [Icu ]	143 kA
Rated short-circuit breaking capacity Icn [Icn ] >Icu to IEC/EN 60947 test cycle O-t-CO [Icu] >400/415 V 50/60 Hz [Icu ]	105 kA
Rated short-circuit breaking capacity Icn [Icn ] >Icu to IEC/EN 60947 test cycle O-t-CO [Icu] >440 V 50/60 Hz [Icu ]	125 kA
Rated short-circuit breaking capacity Icn [Icn ] >Icu to IEC/EN 60947 test cycle O-t-CO [Icu] >525 V 50/60 Hz [Icu ]	100 kA
Rated short-circuit breaking capacity Icn [Icn ] >Icu to IEC/EN 60947 test cycle O-t-CO [Icu] >690 V 50/60 Hz [Icu ]	85 kA
Rated short-circuit breaking capacity Icn [Icn ] >Ics to IEC/EN 60947 test cycle O-t-CO-t-CO [Ics] >240 V 50/60 Hz [Ics ]	65 kA
Rated short-circuit breaking capacity Icn [Icn ] >Ics to IEC/EN 60947 test cycle O-t-CO-t-CO [Ics] >400/415 V 50/60 Hz [Ics ]	50 kA
Rated short-circuit breaking capacity Icn [Icn ] >Ics to IEC/EN 60947 test cycle O-t-CO-t-CO [Ics] >440 V 50/60 Hz [Ics ]	63 kA
Rated short-circuit breaking capacity Icn [Icn ] >Ics to IEC/EN 60947 test cycle O-t-CO-t-CO [Ics] >525 V 50/60 Hz [Ics ]	50 kA
Rated short-circuit breaking capacity Icn [Icn ] >Ics to IEC/EN 60947 test cycle O-t-CO-t-CO [Ics] >690 V 50/60 Hz [Ics]	43 kA
Rated short-circuit breaking capacity Icn [Icn ]	49 kA
Rated short-time withstand current >t = 0.3 s [Icw ]	37 kA
Rated short-time withstand current >t = 1 s [Icw ]	Maximum back-up fuse, if the expected short-circuit currents at the installation location exceed the switching capacity of the circuit-breaker.
Utilization category to IEC/EN 60947-2	19.2 kA
Lifespan, mechanical(of which max. 50 % trip by shunt/undervoltage release) [Operations]	19.2 kA
Lifespan, electrical >AC-1 >400 V 50/60 Hz [Operations]	B
Lifespan, electrical >AC-1 >415 V 50/60 Hz [Operations]	10000
Lifespan, electrical >AC-1 >690 V 50/60 Hz [Operations]	3000
Lifespan, electrical >AC--3 >400 V 50/60 Hz [Operations]	3000
Lifespan, electrical >AC--3 >415 V 50/60 Hz [Operations]	2000
Lifespan, electrical >AC--3 >690 V 50/60 Hz [Operations]	2000
Lifespan, electrical >Max. operating frequency	2000
Total break time at short-circuit	1000
Standard equipment	60 Ops/h
Optional accessories	< 25 ≦ 415 V; < 35 > 415 V ms
Round copper conductor >Tunnel terminal >Stranded >4-hole	Screw connection
Round copper conductor >Bolt terminal and rear-side connection >Direct on the switch >Stranded	Tunnel terminal connection on rear Strip terminal
Round copper conductor >Bolt terminal and rear-side connection >Module plate >Single hole [min.]	4 x (50 - 240) mm2
Round copper conductor >Bolt terminal and rear-side connection >Module plate >Single hole [max.]	1 x (120 - 185) 4 x (50 - 185) mm2
Round copper conductor >Bolt terminal and rear-side connection >Module plate >Double hole [min.]	1 x (120 - 300) mm2
Round copper conductor >Bolt terminal and rear-side connection >Module plate >Double hole [max.]	2 x (95 - 300) mm2
Round copper conductor >Bolt terminal and rear-side connection >Connection width extension >Connection width extension	2 x (95 - 185) mm2
Al circular conductor >Tunnel terminal >Stranded >4-hole	4 x (35 - 185) mm2
Cu strip (number of segments x width x segment thickness) >Flat conductor terminal [min.]	4 x 300 6 x (95 - 240) mm2
Cu strip (number of segments x width x segment thickness) >Flat conductor terminal [max.]	4 x (50 - 240) mm2
Cu strip (number of segments x width x segment thickness) >Module plate >Single hole	6 x 16 x 0.8 mm
Cu strip (number of segments x width x segment thickness) >Bolt terminal and rear-side connection >Flat copper strip, with holes [min.]	(2 x) 10 x 32 x 1.0 mm
Cu strip (number of segments x width x segment thickness) >Bolt terminal and rear-side connection >Flat copper strip, with holes [max.]	(2 x) 10 x 50 x 1.0 mm
Cu strip (number of segments x width x segment thickness) >Bolt terminal and rear-side connection >Connection width extension	5 x 25 x 1.0 mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Screw connection	(2 x) 10 x 50 x 1.0 mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Direct on the switch [min.]	(2 x) 10 x 80 x 1.0 mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Direct on the switch [max.]	M10
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Module plate >Single hole [min.]	25 x 5 mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Module plate >Single hole [max.]	2 x (50 x 10) mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Module plate >Double hole	25 x 5 mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Connection width extension >Connection width extension [min.]	2 x (50 x 10) mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Connection width extension >Connection width extension [max.]	2 x (50 x 10) mm
Control cables	60 x 10 mm
Rated operational current for specified heat dissipation [In]	2 x (80 x 10) mm
Equipment heat dissipation, current-dependent [Pvid]	1 x (0.75 - 2.5) 2 x (0.75 - 1.5) mm2
Operating ambient temperature min.	550 A
Operating ambient temperature max.	33.58 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	-25 °C
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	+70 °C
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.13 Mechanical function	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Overload release current setting	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Adjustment range undelayed short-circuit release	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
With thermal protection	275 - 550 A
Phase failure sensitive	550 - 7700 A
Switch off technique	Yes
Rated operating voltage	Yes
Rated permanent current Iu	Electronic
Rated operation power at AC-3, 230 V	690 - 690 V
Rated operation power at AC-3, 400 V	550 A
Type of electrical connection of main circuit	160 kW
Type of control element	315 kW
Device construction	Screw connection
With integrated auxiliary switch	Rocker lever
With integrated under voltage release	Built-in device fixed built-in technique
Number of poles	No
Rated short-circuit breaking capacity lcu at 400 V, AC	No
Degree of protection (IP)	4
Height	100 kA
Width	IP20
Depth	207 mm
Characteristic curve	210 mm

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.