NHI-E-10L-PKZ0
107040 NHI-E-10L-PKZ0
107040

Standard auxiliary contact, 1N/O, flush mounting, SmartWire-DT
Standard auxiliary contact, Contacts N/O = Normally open: 1 N/O

Product range	Accessories
Accessories	Standard auxiliary contact
Description	NHI-E-10-PKZ0 with connection cable AWG18 blue, for connection to SmartWire module for DILM.
N/O = Normally open
Contact diagram	1 N/O
Contact sequence
Connection technique
Rated impulse withstand voltage [Uimp]	Screw terminals
Overvoltage category/pollution degree
Rated operational voltage [Ue] [Ue]	4000 V AC
Rated operational voltage [Ue] [Ue ]	III/3
Safe isolation to EN 61140 >Between auxiliary contacts and main contacts	440 V AC
Rated operational current [Ie ] >AC-15 >220 - 240 V [Ie]	250 V DC
Rated operational current [Ie ] >DC-13 L/R - 100 ms >24 V [Ie ]	690 V AC
Lifespan >Lifespan, mechanical [Operations]	1 A
Lifespan >Lifespan, electrical [Operations]	2 A
Control circuit reliability [Failure rate]	> 0.1 x 106
Short-circuit rating without welding >Fuse	0.1 x 106
Solid or flexible conductor, with ferrule	<10-8, < one failure at 100 million operations (at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA) λ
Solid or stranded	10 A gG/gL
Rated operational current for specified heat dissipation [In]
Heat dissipation per pole, current-dependent [Pvid]	0,75 - 1,5 mm2
Equipment heat dissipation, current-dependent [Pvid]	18 - 16 AWG
Static heat dissipation, non-current-dependent [Pvs]
Heat dissipation capacity [Pdiss]	1 A
Operating ambient temperature min.	0.013 W
Operating ambient temperature max.	0.013 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	-25 °C
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	+55 °C
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Number of contacts as change-over contact	Is the panel builder´s responsibility.
Number of contacts as normally open contact	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Number of contacts as normally closed contact	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of fault-signal switches	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation current Ie at AC-15, 230 V	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of electric connection
Model
Mounting method	0
Lamp holder	1
Specially designed for North America	0

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.