MSC-R-10-M9(230V50HZ)/BBA
102990 MSC-R-10-M9(230V50HZ)/BBA
102990

Reversing starter, 380 V 400 V 415 V: 4 kW, Ir= 6.3 - 10 A, 230 V 50 Hz, 240 V 60 Hz, AC voltage
Reversing starter, Basic device: MSC, Notes: Also suitable for motors with efficiency class IE3., IE3-ready devices are identified by the logo on their packaging., Motor ratings Motor rating AC-3 380 V 400 V 415 V: P= 4 kW, Setting range of overload releases: Ir= 6.3 - 10 A, Coordination: Type of coordination “1”, Actuating voltage: 230 V 50 Hz, 240 V 60 Hz, AC voltage, Standards: UL 508 (on request), CSA C 22.2 No. 14 (on request)

Basic function	Reversing starters (complete devices)
Basic device	MSC
Notes
Connection to SmartWire-DT	Also suitable for motors with efficiency class IE3. IE3-ready devices are identified by the logo on their packaging.
Motor rating [P] >AC-3 >380 V 400 V 415 V [P]	no
Rated operational current >AC-3 >380 V 400 V 415 V [Ie]	4 kW
Rated short-circuit current 380 - 415 V [Iq ]	8.5 A
Setting range of overload releases [Ir]	100 kA
Coordination	6.3 - 10 A
Contact sequence	Type of coordination “1”
Actuating voltage
Motor-protective circuit-breakers	230 V 50 Hz, 240 V 60 Hz
Contactor	AC voltage
DOL starter wiring set Mechanical connection element and electrical electric contact module	PKZM0-10 Type
Notes	DILM9-01(…) Part no.
Standards	PKZM0-XRM12 Type
Rated impulse withstand voltage [Uimp]	The reversing starter (complete units) consists of a PKZM0 motor protective circuit breaker and two DILM contactors. These combinations are mounted on the busbar adapters. The connection of the main circuit between the motor protective circuit breaker and the contactor is established with an electrical contact module. Complete units with mechanical interlock, starters up to 12 A also feature electrical interlock. Further information Page Technical data PKZM0 ￫ PKZM0 Accessories PKZ ￫ 072896 Technical data DILM ￫ DILM Accessories DIL ￫ 281199
Overvoltage category/pollution degree	UL 508 (on request) CSA C 22.2 No. 14 (on request)
Rated operational voltage [Ue]	6000 V AC
Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	III/3
Motor protective circuit breaker PKZM0, PKE	230 - 415 V
DILM contactors >Power consumption of the coil in a cold state and 1.0 x US >Dual-voltage coil 50 Hz [Sealing]	9 A
Auxiliary contacts >Pilot Duty >AC operated	PKZM0 motor-protective circuit-breakers, see motor-protective circuit-breakers/PKZM0 product group DILM contactors, see contactor product group DILET timing relay, ETR, see contactors, electronic timing relays product group
Auxiliary contacts >Pilot Duty >DC operated	1.2 W
Auxiliary contacts >General Use >AC	A600
Auxiliary contacts >General Use >AC	P300
Auxiliary contacts >General Use >DC	600 V
Auxiliary contacts >General Use >DC	15 A
Rated operational current for specified heat dissipation [In]	250 V
Heat dissipation per pole, current-dependent [Pvid]	1 A
Equipment heat dissipation, current-dependent [Pvid]	9 A
Static heat dissipation, non-current-dependent [Pvs]	2.8 W
Heat dissipation capacity [Pdiss]	8.4 W
Operating ambient temperature min.	1.4 W
Operating ambient temperature max.	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	-25 °C
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	+55 °C
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.13 Mechanical function	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Kind of motor starter	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
With short-circuit release	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated control supply voltage Us at AC 50HZ	Reversing starter
Rated control supply voltage Us at AC 60HZ	Yes
Rated control supply voltage Us at DC	230 - 230 V
Voltage type for actuating	0 - 0 V
Rated operation power at AC-3, 230 V, 3-phase	0 - 0 V
Rated operation power at AC-3, 400 V	AC
Rated power, 460 V, 60 Hz, 3-phase	2.2 kW
Rated power, 575 V, 60 Hz, 3-phase	4 kW
Rated operation current Ie	0 kW
Rated operation current at AC-3, 400 V	0 kW
Overload release current setting	8.5 A
Rated conditional short-circuit current, type 1, 480 Y/277 V	9 A
Rated conditional short-circuit current, type 1, 600 Y/347 V	6.3 - 10 A
Rated conditional short-circuit current, type 2, 230 V	0 A
Rated conditional short-circuit current, type 2, 400 V	0 A
Number of auxiliary contacts as normally open contact	0 A
Number of auxiliary contacts as normally closed contact	0 A
Ambient temperature, upper operating limit	0
Temperature compensated overload protection	0
Release class	60 °C
Type of electrical connection of main circuit	Yes
Type of electrical connection for auxiliary- and control current circuit	CLASS 10
Rail mounting possible	Screw connection
With transformer	Screw connection
Number of command positions	Yes
Suitable for emergency stop	No
Coordination class according to IEC 60947-4-3	0
Number of indicator lights	No
External reset possible	Class 1
With fuse	0
Degree of protection (IP)	No
Degree of protection (NEMA)	No
Supporting protocol for TCP/IP	IP20
Supporting protocol for PROFIBUS	Other
Supporting protocol for CAN	No
Supporting protocol for INTERBUS	No
Supporting protocol for ASI	No
Supporting protocol for MODBUS	No
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Width	No
Height	No
Depth	90 mm
Product Standards	200 mm
UL File No.	154 mm
UL Category Control No.	UL60947-4-1A; CSA-C22.2 No. 14-10; IEC60947-4-1; CE marking
CSA File No.	E123500
CSA Class No.	NKJH
North America Certification	12528
Specially designed for North America	3211-04

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.