M30C-FR*-*
187081 M30C-FR*-*
187081

Potentiometer, flat front, M30, 30.5 mm, P 0.5 W, Metal bezel
Potentiometer, RMQ design: flat front, Part group reference (e.g. DIL): M30, Mounting hole diameter: 30.5 mm, Single unit, Description: 3 individual screw terminals, Accuracy of resistance value: ± 10% (linear), Resistor: Selectable, ￫ Note, Rated power: P= 0.5 W, Degree of Protection: IP66, Metal bezel, Connection to SmartWire-DT: no

RMQ design	flat front
Part group reference (e.g. DIL)	M30
Mounting hole diameter [⌀]	30.5 mm
Basic function	Potentiometer
Single unit/Complete unit	Single unit
Description	3 individual screw terminals Accuracy of resistance value: ± 10% (linear)
Contact sequence
Resistor	Selectable, ￫ Note
Rated power [P]	0.5 W
Degree of Protection	IP66
Front ring	Metal bezel
Connection to SmartWire-DT	no
Notes	When ordering, the type reference must include the following details: * - *: 1. wildcard ≙ resistance values:   1K = 1 kΩ   2K2 = 2.2 kΩ   4K7 = 4.7 kΩ   10K = 10 kΩ   22K = 22 kΩ   47K = 47 kΩ   100K = 100 kΩ   470K = 470 kΩ   1M = 1 MΩ * - *: 2nd wildcard ≙ Standard scale/inscription: X1000   without scale/inscription: “-“
Lifespan, mechanical [Operations]	25000
Degree of Protection	IP66
Ambient temperature >Open	-25 - +70 °C
Tightening torque for terminal screw	0.5 Nm
shipping classification	DNV GL
Rated operational current for specified heat dissipation [In]
Heat dissipation per pole, current-dependent [Pvid]	0 A
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	0 W
Heat dissipation capacity [Pdiss]	0.5 W
Operating ambient temperature min.	0 W
Operating ambient temperature max.	-25 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	+70 °C
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Please enquire
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Resistance	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Power consumption	0 Ohm
Hole diameter	0.5 W
Number of revolutions	30 mm
Type of electric connection	1 - 1
Degree of protection (IP)	Screw connection
Degree of protection (NEMA)	IP66
Product Standards	Other
UL File No.	IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking
UL Category Control No.	E29184
CSA File No.	NKCR
CSA Class No.	012528
North America Certification	3211-03
Degree of Protection	UL listed, CSA certified

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.