M22-CK01D
262510 M22-CK01D
262510

Contact element, 1N/CL, front mount, spring clamp connection
Contact element, Connection technique: Cage Clamp, Fixing: Front fixing, Description: Cage Clamp is a registered trademark of Wago Kontakttechnik GmbH/Minden, Germany, Contacts N/C = Normally closed: 1 NC, Contacts Notes: = safety function, by positive opening to IEC/EN 60947-5-1, Actuator travel and actuation force as per DIN EN 60947-5-1, K.5.4.1: mm 4.8, Maximum travel: mm 5.7, Minimum force for positive opening: N 15, Degree of Protection: IP20, Connection to SmartWire-DT: no, Connection type: Single contact, Standards: IEC 60947-5-1

Basic function accessories	Contact elements
Description	Cage Clamp is a registered trademark of Wago Kontakttechnik GmbH/Minden, Germany
Connection technique	Cage Clamp
Fixing	Front fixing
Degree of Protection	IP20
Connection to SmartWire-DT	no
Approval
N/C = Normally closed	1 NC
Notes	= safety function, by positive opening to IEC/EN 60947-5-1
[mm]	4.8
Maximum travel [mm]	5.7
Minimum force for positive opening [ N]	15
Contact sequence
Contact diagram
Configuration
Connection type	Single contact
Connection technique	Cage Clamp
Standards	IEC 60947-5-1
Lifespan, mechanical [Operations]	> 5 x 106
Operating frequency [Operations/h]	≦ 3600
Actuating force	≦ 5 n
Degree of Protection	IP20
Climatic proofing	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature >Open	-25 - +70 °C
Mechanical shock resistance to IEC 60068-2-27 Shock duration 11 ms, half-sinusoidal	> 30 g
Terminal capacities >Solid	0.75 - 2.5 mm2
Terminal capacities >Stranded	0.5 - 2.5 mm2
Terminal capacities >Flexible with ferrule	0.5 - 1.5 mm2
Rated impulse withstand voltage [Uimp]	6000 V AC
Rated insulation voltage [Ui ]	500 V
Overvoltage category/pollution degree	III/3
Control circuit reliability >at 24 V DC/5 mA [HF ]	< 10-7 (i.e. 1 failure to 107 operations) Fault probability
Control circuit reliability >at 5 V DC/1 mA [HF ]	< 5 x 10-6 (i.e. 1 failure in 5 x 106 operations) Fault probability
Max. short-circuit protective device >Fuseless	PKZM0-10/FAZ-B6/1 Type
Max. short-circuit protective device >Fuse [gG/gL]	10 A
Rated operational current [Ie ] >AC-15 >115 V [Ie ]	6 A
Rated operational current [Ie ] >AC-15 >220 V 230 V 240 V [Ie]	6 A
Rated operational current [Ie ] >AC-15 >380 V 400 V 415 V [Ie]	4 A
Rated operational current [Ie ] >AC-15 >500 V [Ie]	2 A
Rated operational current [Ie ] >DC-13 >24 V [Ie ]	3 A
Rated operational current [Ie ] >DC-13 >42 V [Ie ]	1.7 A
Rated operational current [Ie ] >DC-13 >60 V [Ie ]	1.2 A
Rated operational current [Ie ] >DC-13 >110 V [Ie ]	0.8 A
Rated operational current [Ie ] >DC-13 >220 V [Ie ]	0.3 A
Lifespan, electrical >AC-15 >230 V/0.5 A [Operations]	1.6 x 106
Lifespan, electrical >AC-15 >230 V/1.0 A [Operations]	1 x 106
Lifespan, electrical >AC-15 >230 V/3.0 A [Operations]	0.7 x 106
Lifespan, electrical >DV-13 >12 V/2.8 A [Operations]	1.2 x 106
Rated conditional short-circuit current [Iq]	1 kA
Rated operational current for specified heat dissipation [In]	6 A
Heat dissipation per pole, current-dependent [Pvid]	0.11 W
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	0 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	-25 °C
Operating ambient temperature max.	+70 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of contacts as change-over contact	0
Number of contacts as normally open contact	0
Number of contacts as normally closed contact	1
Number of fault-signal switches	0
Rated operation current Ie at AC-15, 230 V	6 A
Type of electric connection	Spring clamp connection
Model	Top mounting
Mounting method	Front fastening
Lamp holder	None
Product Standards	IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking
UL File No.	E29184
UL Category Control No.	NKCR
CSA File No.	012528
CSA Class No.	3211-03
North America Certification	UL listed, CSA certified
Degree of Protection	UL/CSA Type: -

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.