AS-Interface module, 2I, 1Q, screw connectionASI slave 2 inputs, 1 output
AS-Interface module, 2I, 1Q, screw connection
ASI slave 2 inputs, 1 output
| Product range | Accessories |
| Accessories | AS-Interface |
| Basic function accessories | AS-Interface connection |
| Fixing | Front fixing for RMQ-Titan |
| Front ring | AS-Interface slave Adapter element for RMQ-Titan AS-Interface information: 2 input bits, 1 output bit Module enclosure for snap fitting on the contact and LED elements: – Inputs for 2 contact elements: M22-K01 (N/C), M22-K10 (N/O) – Output for 1 LED element: M22-LED-... Including AS-Interface connector as insulation piercing terminal |
| Connection to SmartWire-DT | Bezel: titanium |
| Standards | no |
| Radio interference suppression | IEC/EN 60947, DIN EN 50 295 |
| Degree of Protection | EN 55011, EN 55022 |
| Climatic proofing | IP20 |
| Ambient temperature >Open |
Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Mechanical shock resistance | -25 - +55 °C |
| Fixing | > 30 Shock duration 11 ms g |
| Mounting position | Front fixing for RMQ-Titan |
| Rated voltage to AS-Interface Specification | As required |
| Connection of the AS interface line | 26.5 - 31.6 V DC |
| Power supply | Yellow plug-in terminal as insulation piercing terminal |
| Addressing | Completely from the AS-Interface cable |
| Max. total current | Via connection to AS-Interface cable |
| AS-Interface | ≦ 40 mA |
| Rated operational current when idle (no I, O set) | Protected against polarity reversal |
| Status LEDs | 30 mA |
| Inputs, protected against short-circuit | AS-Interface power line: green LED on element back AS-Interface ERROR, failure of AS-Interface master: red LED on element back |
| Length of connecting cables | 2 (normally 22 V/5 mA) Number |
| Outputs, protected against short-circuit | 200 cm |
| Voltage range | 1 (normally 19 V/8 mA) Number |
| Length of connecting cables | 24 V DC (+10/-15%) V DC |
| Profile | 200 cm |
| Specification | S-3.A.E |
| Addresses | 2.1 |
| Rated operational current for specified heat dissipation [In] | 62 Number |
| Heat dissipation per pole, current-dependent [Pvid] | 0 A |
| Equipment heat dissipation, current-dependent [Pvid] | 0 W |
| Static heat dissipation, non-current-dependent [Pvs] | 0 W |
| Heat dissipation capacity [Pdiss] | 1.3 W |
| Operating ambient temperature min. | 0 W |
| Operating ambient temperature max. | -25 °C |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+55 °C |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Built-in diameter | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Number of appliances to build in | 0 mm |
| Product Standards | 0 |
| UL File No. | IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking |
| UL Category Control No. | E29184 |
| CSA File No. | NKCR |
| CSA Class No. | 012528 |
| North America Certification | 3211-03 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
