Actuator, angledActuator, Basic function: actuators, Part group reference: LS…ZBZ/X, Function: Angled actuator, Short, Stainless steel, For use with: For swing doors above 350 mm width
Actuator, angled
Actuator, Basic function: actuators, Part group reference: LS…ZBZ/X, Function: Angled actuator, Short, Stainless steel, For use with: For swing doors above 350 mm width
| Basic function | actuators |
| Part group reference | LS…ZBZ/X |
| Function | Angled actuator |
| Description | Short Stainless steel |
| For use with | For swing doors above 350 mm width |
| Notes | for combination with LS-...ZBZ/X basic devices From width: 350 mm |
| Standards | IEC/EN 60947 |
| Climatic proofing | Damp heat, constant, to IEC 60068-2-78; damp heat, cyclical, to IEC 60068-2-30 |
| Mounting position | As required |
| Terminal capacities >Solid |
1 x (0.75 - 2.5) 2 x (0.75 - 1.5) mm2 |
| Terminal capacities >Flexible with ferrule |
1 x (0.5 - 1.5) 2 x (0.5 - 1.5) mm2 |
| Repetition accuracy | 0.02 mm |
| Rated impulse withstand voltage [Uimp] | 4000 V AC |
| Rated insulation voltage [Ui ] | 400 V |
| Overvoltage category/pollution degree | III/3 |
| Rated operational current [Ie
] >AC-15 >24 V [Ie ] |
6 A |
| Rated operational current [Ie
] >AC-15 >220 V 230 V 240 V [Ie] |
6 A |
| Rated operational current [Ie
] >AC-15 >380 V 400 V 415 V [Ie] |
4 A |
| Rated operational current [Ie
] >DC-13 >24 V [Ie ] |
3 A |
| Rated operational current [Ie
] >DC-13 >110 V [Ie ] |
0.8 A |
| Rated operational current [Ie
] >DC-13 >220 V [Ie ] |
0.3 A |
| Supply frequency | max. 400 Hz |
| Short-circuit rating to IEC/EN 60947-5-1 >max. fuse |
6 A gG/gL |
| Mechanical shock resistance (half-sinusoidal shock, 20 ms) >Standard-action contact |
10 g |
| Operating frequency [Operations/h] | ≦ 800 |
| Mechanical >Mechanical holding force acc. to GS-ET-19 (04/2004) >XG, XW, XNG |
1700 N |
| Mechanical >Mechanical holding force acc. to GS-ET-19 (04/2004) >XWA, XFG, XF |
1600 N |
| Mechanical >Mechanical holding force acc. to GS-ET-19 (04/2004) >XNW |
1200 N |
| Electromechanical >For magnet >Power consumption >at 120 V AC |
8 VA |
| Electromechanical >For magnet >Power consumption >at 24 V DC |
8 W |
| Electromechanical >Pick-up and drop-out values |
0.85 - 1.1 x Us |
| Electromechanical >Magnet duty factor |
100 % ED |
| Rated operational current for specified heat dissipation [In] | 0 A |
| Heat dissipation per pole, current-dependent [Pvid] | 0 W |
| Equipment heat dissipation, current-dependent [Pvid] | 0 W |
| Static heat dissipation, non-current-dependent [Pvs] | 0 W |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | -25 °C |
| Operating ambient temperature max. | +40 °C |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Please enquire |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Is the panel builder´s responsibility. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Not applicable. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Model | Actuator with vertical mounting |
| Product Standards | IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14; CE marking |
| UL File No. | E29184 |
| UL Category Control No. | NKCR |
| CSA File No. | 12528 |
| CSA Class No. | 3211-03 |
| North America Certification | UL listed, CSA certified |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
