LS-02-CC/RL
156509 LS-02-CC/RL
156509

Position switch, Rotary lever, Complete device, 2 NC, Cage Clamp, Yellow, Insulated material, -40 - +70 °C, EN 50047 Form A
IEC EN 60947-5-1, high degree of protection IP66, device for world markets, modular system, also for use in safety circuits, by positive operation and positive opening contacts. Easy mounting technology operating heads can be attached in any 4 directions and snapped on simple, quick and safely using the bayonet fitting. They are equipped with Cage Clamp or screw terminals and are available with metal or insulated enclosures., suitable for use with electronic devices to IEC/EN 61131-2

Product range	Rotary lever
Degree of Protection	IP66, IP67
Features	Complete device
Ambient temperature	-40 - +70 °C
Design	EN 50047 Form A
N/C = Normally closed	2 NC
Notes	= safety function, by positive opening to IEC/EN 60947-5-1
Contact sequence
Contact travel■ = Contact closed□ = Contact open
Positive opening (ZW)	yes
Enclosure covers	Yellow
Enclosure covers
Housing	Insulated material
Connection type	Cage Clamp
Notes	Cage-Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden, Germany. Accessories for the Cage-Clamp terminals from Wago:power comb, gray, Wago Article No. 264-402
Notes	The operating head can be rotated at 90° intervals to adapt to the specified approach direction.
Standards	IEC/EN 60947
Climatic proofing	Damp heat, constant, to IEC 60068-2-78; damp heat, cyclical, to IEC 60068-2-30
Ambient temperature	-40 - +70 °C
Mounting position	As required
Degree of Protection	IP66, IP67
Terminal capacities >Solid	1 x (0.5 - 2.5) mm2
Terminal capacities >Flexible with ferrule	1 x (0.5 - 1.5) mm2
Repetition accuracy	0.15 mm
Rated impulse withstand voltage [Uimp]	4000 V AC
Rated insulation voltage [Ui ]	400 V
Overvoltage category/pollution degree	III/3
Rated operational current [Ie ] >AC-15 >24 V [Ie ]	6 A
Rated operational current [Ie ] >AC-15 >220 V 230 V 240 V [Ie]	6 A
Rated operational current [Ie ] >AC-15 >380 V 400 V 415 V [Ie]	4 A
Rated operational current [Ie ] >DC-13 >24 V [Ie ]	3 A
Rated operational current [Ie ] >DC-13 >110 V [Ie ]	0.6 A
Rated operational current [Ie ] >DC-13 >220 V [Ie ]	0.3 A
Control circuit reliability >at 24 V DC/5 mA [HF ]	< 10 -7, < 1 fault in 107 operations Fault probability
Control circuit reliability >at 5 V DC/1 mA [HF ]	< 5 x 10-6, < 1 failure at 5 x 106 operations Fault probability
Supply frequency	max. 400 Hz
Short-circuit rating to IEC/EN 60947-5-1 >max. fuse	6 A gG/gL
Lifespan, mechanical [Operations]	8 x 106
Mechanical shock resistance (half-sinusoidal shock, 20 ms) >Standard-action contact	25 g
Operating frequency [Operations/h]	≦ 6000
Mechanical >Actuating force at beginning/end of stroke	1.0/8.0 N
Mechanical >Actuating torque of rotary drives	0.2 Nm
Mechanical >Max. operating speed with DIN cam	1.5 m/s
Mechanical >Notes	for angle of actuation α = 0°
Rated operational current for specified heat dissipation [In]	6 A
Heat dissipation per pole, current-dependent [Pvid]	0.17 W
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	0 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	-40 °C
Operating ambient temperature max.	+70 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of control element	Rotary lever
Product Standards	IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14; CE marking
UL File No.	E29184
UL Category Control No.	NKCR
CSA File No.	12528
CSA Class No.	3211-03
North America Certification	UL listed, CSA certified
Degree of Protection	IEC: IP66, 67, UL/CSA Type 3R, 4X (indoor use only), 12, 13

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.