Auxiliary contact, 2N/O+1N/C, for P5, 125A, rear mountingAuxiliary contact, Product range: Accessories, Part group reference: P5, Late-break switching-on behavior, early-make switching-off behavior, The N/O is always connected as a load-shedding contact., For left or right side mounting, Contacts N/O = Normally open: 2 N/O, Contacts N/C = Normally closed: 1 NC, For use with: P5-125(160)/Z(V)
Auxiliary contact, 2N/O+1N/C, for P5, 125A, rear mounting
Auxiliary contact, Product range: Accessories, Part group reference: P5, Late-break switching-on behavior, early-make switching-off behavior, The N/O is always connected as a load-shedding contact., For left or right side mounting, Contacts N/O = Normally open: 2 N/O, Contacts N/C = Normally closed: 1 NC, For use with: P5-125(160)/Z(V)
| Product range | Accessories |
| Basic function | Auxiliary contact |
| Part group reference | P5 |
| N/O = Normally open | Late-break switching-on behavior, early-make switching-off behavior The N/O is always connected as a load-shedding contact. For left or right side mounting |
| N/C = Normally closed | 2 N/O |
| For use with | 1 NC |
| For use with | P5-125(160)/Z(V) |
| Rated uninterrupted current [Iu] | P5-125, P5-160, intermediate |
| Standards | 10 A |
| Rated insulation voltage [Ui] >Rated insulation voltage [Ui ] |
Control circuit isolator to IEC/EN 60947-5 |
| Rated uninterrupted current [Iu
] >Rated uninterrupted current [Iu] |
500 V AC |
| Rated operational current [Ie
] >AC-15 >230 V [Ie] >AC-15 with 230 V [Ie] |
10 A |
| Rated operational current [Ie
] >AC-15 >400 V/415 V [Ie] >380 V 415 V [Ie] |
6 A |
| Rated operational current [Ie
] >DC-13 [Ie ] >125 V [Ie ] |
3 A |
| Rated operational current [Ie
] >DC-13 [Ie ] >250 V [Ie ] |
0.23 A |
| Short-circuit rating >Maximum fuse |
0.1 A |
| Terminal capacities >Solid |
10 A gG/gL |
| Terminal capacities >Flexible with ferrules to DIN 46228 |
0.5 - 2.5 mm2 |
| Terminal capacities >Stripping length |
0.5 - 2.5 mm2 |
| Tightening torque | 8 mm |
| Control circuit reliability at 24 V DC, 10 mA [Fault probability] | 0.8 Nm |
| Rated operational current for specified heat dissipation [In] | < 10-5, < 1 failure in 100000 operations HF |
| Heat dissipation per pole, current-dependent [Pvid] | 6 A |
| Equipment heat dissipation, current-dependent [Pvid] | 0.11 W |
| Static heat dissipation, non-current-dependent [Pvs] | 0 W |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | 0 W |
| Operating ambient temperature max. | -25 °C |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+50 °C |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Number of contacts as change-over contact | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Number of contacts as normally open contact | 0 |
| Number of contacts as normally closed contact | 2 |
| Number of fault-signal switches | 1 |
| Rated operation current Ie at AC-15, 230 V | 0 |
| Type of electric connection | 6 A |
| Model | Screw connection |
| Mounting method | Top mounting |
| Lamp holder | Side mounting |
| Product Standards | Other |
| UL File No. | UL 508; CSA-C22.2 No. 14-05; IEC/EN 60947-5; CE marking |
| UL Category Control No. | E36332 |
| CSA File No. | NLRV, NLRV7 |
| CSA Class No. | 223805 |
| North America Certification | 3211-03 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
