Connecting cable for networking devices via easyNet, 2xRJ45, 150cmConnecting cable can be used for easyNet, prefabricated to 150 cm 2 RJ45 plugs at the ends
Connecting cable for networking devices via easyNet, 2xRJ45, 150cm
Connecting cable can be used for easyNet, prefabricated to 150 cm 2 RJ45 plugs at the ends
Description | Connection cable for XC200 to interface switch |
Length | 1.5 m |
For use with | easy800 MFD-…-CP8… |
For use with | easyNet |
Conductor material | |
Conductor material | E-Cu 58 F21 nach DIN 40500 Teil 4 |
Core | Max. 0.49 mm (Cu wire bare 7 x 0.16 mm2) |
Stranding | 0.60 mm ±0.10 (dielectric polyethylene, halogen free, every two cores paired and twisted: wsbl-bl, wsor-or, wsgn-gn, wsbr-br) |
Sheath | Four pairs |
Rated operational current for specified heat dissipation [In] | 4.5 mm ± 0.2 (halogen free casing material, flame retardant (FRNC)) mm2 |
Heat dissipation per pole, current-dependent [Pvid] | |
Equipment heat dissipation, current-dependent [Pvid] | 0 A |
Static heat dissipation, non-current-dependent [Pvs] | 0 W |
Heat dissipation capacity [Pdiss] | 0 W |
Operating ambient temperature min. | 0 W |
Operating ambient temperature max. | 0 W |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
-25 °C |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
+55 °C |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
|
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. |
10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
10.5 Protection against electric shock | Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
10.10 Temperature rise | Is the panel builder´s responsibility. |
10.11 Short-circuit rating | Is the panel builder´s responsibility. |
10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
10.13 Mechanical function | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Conductor surface | Is the panel builder´s responsibility. |
Diameter conductor | Is the panel builder´s responsibility. |
Nominal cross section conductor | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
AWG-size | |
Conductor category | Bare |
Number of cores | 4.5 mm |
Number of stranding elements | 0.14 mm² |
Stranding element | 26 |
Core insulation material | Class 2 = stranded |
Specification core insulation | 8 |
Core identification | 2 |
Screen over stranding element | Pairs |
Stranding | Other |
Screen over stranding | |
Longitudinal water blocking cable | Colour |
Radial water blocking cable | None |
Protective sheath | |
Armouring | None |
Material outer sheath | |
Specification material outer sheath | |
Colour outer sheath | |
Reaction-to-fire class according to EN 13501-6 | |
Smoke development class according to EN 13501-6 | |
Euro class flaming droplets/particles according to EN 13501-6 | |
Euro class acidity according to EN 13501-6 | Grey |
Halogen free (acc. EN 60754-1/2) | |
Halogen free (acc. IEC 60754-2) | |
Flame retardant | |
Low smoke (acc. EN 61034-2) | |
Low smoke (acc. IEC 61034-2) | Yes |
Oil resistant (acc. EN 60811-404) | |
Oil resistant (acc. IEC 60811-404) | No |
Insulation integrity in accordance with IEC 60331 | No |
Circuit integrity | Yes |
Outer diameter approx. | |
Min. permitted bending radius, moving application with forced guidance | |
Min. permitted bending radius, moving application/free movement | |
Min. permitted bending radius, stationary application/permanent installation | |
Permitted cable outer temperature during assembling/handling | 4.5 mm |
Permitted cable outer temperature after assembling without vibration | mm |
Category | mm |
NVP value | mm |
Underground installation | -25 - 60 °C |
UV resistant | -25 - 60 °C |
Product Standards | 5E |
UL File No. | 67 % |
UL Category Control No. | No |
CSA File No. | |
CSA Class No. | IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking |
North America Certification | E135462 |
Degree of Protection | NRAQ |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.