alt
alt

Contact element, 1 N/C, front mount, screw connectionContact element, Product range: Accessories, Single unit, Connection technique: Blade terminal, Description: admissible operating voltage: 5 – 250 V, Contacts N/C = Normally closed: 1 NC, Contacts Notes: = safety function, by positive opening to IEC/EN 60947-5-1, Degree of Protection: IP20 with ISH2,8, Connection to SmartWire-DT: no

Contact element, 1 N/C, front mount, screw connection
Contact element, Product range: Accessories, Single unit, Connection technique: Blade terminal, Description: admissible operating voltage: 5 – 250 V, Contacts N/C = Normally closed: 1 NC, Contacts Notes: = safety function, by positive opening to IEC/EN 60947-5-1, Degree of Protection: IP20 with ISH2,8, Connection to SmartWire-DT: no

Product range Accessories
Single unit/Complete unit Single unit
Basic function accessories Contact elements
Connection technique Blade terminal
Description admissible operating voltage: 5 – 250 V
N/C = Normally closed 1 NC
Notes = safety function, by positive opening to IEC/EN 60947-5-1
Contact sequence 116S002
Contact travel diagram, stroke in connection with front element 116U002
Degree of Protection IP20 with ISH2,8
Connection to SmartWire-DT no
Standards IEC/EN 60947
Lifespan, mechanical [Operations] > 100 x 106
Operating frequency [Operations/h] ≦ 3600
Actuating force ≦ 3 n
Degree of protection, IEC/EN 60529 IP20 with ISH2,8
Climatic proofing Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
>Open
-25 - +60 °C
Ambient temperature
>Enclosed
- 25 - 40 °C
Mounting position As required
Mechanical shock resistance > 40
according to IEC 60068-2-27
Shock duration 11 ms
Sinusoidal g
Terminal capacities 0.5 - 1.0 mm2
Blade terminal 2.8 x 0.8 mm to DIN 46244
Fast-on connectors 2.8 x 0.8 mm to DIN 46247 and IEC 60760
Rated impulse withstand voltage [Uimp] 4000 V AC
Rated insulation voltage [Ui ] 250 V
Overvoltage category/pollution degree III/3
Rated operational voltage [Ue] 250 V AC
Control circuit reliability
>at 24 V DC/5 mA [HF ]
< 10-7 (i.e. 1 failure to 107 operations) Fault probability
Control circuit reliability
>at 5 V DC/1 mA [HF ]
< 5 x 10-6 (i.e. 1 failure in 5 x 106 operations) Fault probability
Use of insulated ferrule ISH 2,8 >24 V AC/DC recommended
>50 V AC or 120 V DC is mandatory, even on unused blade terminals
Max. short-circuit protective device
>Fuseless
FAZ-B6/1 Type
Max. short-circuit protective device
>Fuse [gG/gL]
10 A
Rated operational current [Ie ]
>AC-15
>24 V [Ie ]
4 A
Rated operational current [Ie ]
>AC-15
>48 V [Ie ]
4 A
Rated operational current [Ie ]
>AC-15
>110 V [Ie ]
4 A
Rated operational current [Ie ]
>AC-15
>220 V 230 V 240 V [Ie]
4 A
Rated operational current [Ie ]
>DC-13
>24 V [Ie ]
1.5 A
Rated operational current [Ie ]
>DC-13
>42 V [Ie ]
1 A
Rated operational current [Ie ]
>DC-13
>60 V [Ie ]
0.8 A
Rated operational current [Ie ]
>DC-13
>110 V [Ie ]
0.5 A
Rated operational current [Ie ]
>DC-13
>220 V [Ie ]
0.2 A
Lifespan, electrical AC-15 to IEC/EN 60947-5-1 at 230 V; Ie = rated operational current 116U012
Rated operational current for specified heat dissipation [In] 4 A
Heat dissipation per pole, current-dependent [Pvid] 0.1 W
Equipment heat dissipation, current-dependent [Pvid] 0 W
Static heat dissipation, non-current-dependent [Pvs] 0 W
Heat dissipation capacity [Pdiss] 0 W
Operating ambient temperature min. -25 °C
Operating ambient temperature max. +60 °C
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts
>10.2.7 Inscriptions
Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections Is the panel builder´s responsibility.
10.8 Connections for external conductors Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Is the panel builder´s responsibility.
10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of contacts as change-over contact 0
Number of contacts as normally open contact 0
Number of contacts as normally closed contact 1
Number of fault-signal switches 0
Rated operation current Ie at AC-15, 230 V 6 A
Type of electric connection Screw connection
Model Top mounting
Mounting method Front fastening
Lamp holder None
Product Standards IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CE marking
UL File No. E29184
UL Category Control No. NKCR
CSA File No. 46552
CSA Class No. 3211-03
North America Certification UL listed, CSA certified

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.