Main choke, three-phase, 550 V + 0% (50/60 Hz), V AC, 80 A, 0.23 mHMain choke, rated operating voltage 480 V AC, three-phase, uk =4%
Main choke, three-phase, 550 V + 0% (50/60 Hz), V AC, 80 A, 0.23 mH
Main choke, rated operating voltage 480 V AC, three-phase, uk =4%
| Product range | Accessories |
| Accessories | Mains chokes |
| Description | three-phase |
| For use with | DA1, SVX, SPX |
| Max. permissible connection voltage | 550 V + 0% (50/60 Hz) V AC |
| Rated operational current [Ie] | 80 A |
| Inductance [L] | 0.23 mH |
| Maximum heat dissipation [Pv] | 86 W |
| Standards | |
| Operating temperature | IEC/EN 61558-2-20-2000, VDE 0570 Part 2-20/2001-04, UL, CSA |
| Storage temperature [ϑ] | -25 to +40, up to 70 with current derating (see the note) °C |
| Mechanical shock resistance | -25 - +85 °C |
| Vibration resistance | 11 ms2/15 3 shocks g |
| Vibration | 1 (0 - 150 Hz) g |
| Altitude | 0.35 mm at 10 - 55 Hz |
| Mounting position | 0 – 1000 above sea level, up to 5000 with current reduction (see notes) m |
| Free surrounding areas | Standing vertically, suspended horizontally |
| Degree of Protection | < 50 MM |
| Rated duty factor | IP00 (connection lugs) |
| Weight | 100 % DF |
| Rated operational voltage | 7.3 kg |
| Max. supply voltage | |
| Operating frequency [f] | 3 AC 400 V |
| Insulation class | 550 V + 0% (50/60 Hz) V AC |
| Rated operational current [Ie] | 50/60 Hz |
| Inductance [L] | B |
| Maximum heat dissipation [Pv] | 80 A |
| Voltage sag [Uk] | 0.23 mH |
| Connection lugs | 86 W |
| PE stud | 2.5 % |
| Connection lug | |
| Drilling | ✓ |
| Tightening torque | ✓ |
| Rated operational current for specified heat dissipation [In] | Cu 20 x 3 mm2 |
| Heat dissipation per pole, current-dependent [Pvid] | 9 mm |
| Equipment heat dissipation, current-dependent [Pvid] | 6 Nm |
| Static heat dissipation, non-current-dependent [Pvs] | |
| Heat dissipation capacity [Pdiss] | The following applies for the installation altitude: Derating with respect to the rated operational current Ie:
|
| Operating ambient temperature min. | |
| Operating ambient temperature max. | 80 A |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0 W |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
86 W |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
0 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
-25 °C |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
+40 °C |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
|
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Suitable as interference suppression reactance coil | Is the panel builder´s responsibility. |
| Suitable as net reactance coil | Is the panel builder´s responsibility. |
| Suitable as commutation reactance coil | Is the panel builder´s responsibility. |
| Suitable as ripple filter choke | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Suitable as output reactance coil | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Number of poles, primary side | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Rated clock frequency | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Rated operation frequency | |
| Max. rated operation voltage Ue | |
| Rated current at AC | No |
| Max. rated current (Ith) at rated voltage DC | Yes |
| Rated inductance | No |
| Degree of protection (IP) | No |
| Relative short circuit voltage | No |
| Resonance frequency | 3 |
| Degree of protection (NEMA) | 0 kHz |
| Product Standards | 50 - 60 Hz |
| UL File No. | 550 V |
| UL Category Control No. | 80 - 80 A |
| CSA File No. | 80 A |
| North America Certification | 0.23 mH |
| Specially designed for North America | IP00 |
| Suitable for | 2.5 % |
| Max. Voltage Rating | 0 Hz |
| Degree of Protection | Other |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
