Motor choke, three-phase, 750 V + 0% (0 - 400 Hz), V AC, 180 A, 0.3 mHThree-phase motor choke max. permissible mains voltage 750V AC rated operational current 180A reactor 0.3mH
Motor choke, three-phase, 750 V + 0% (0 - 400 Hz), V AC, 180 A, 0.3 mH
Three-phase motor choke max. permissible mains voltage 750V AC rated operational current 180A reactor 0.3mH
| Product range | Accessories |
| Accessories | Motor chokes |
| Description | three-phase |
| For use with | DA1, DG1, SVX, SPX |
| Max. permissible connection voltage | 750 V + 0% (0 - 400 Hz) V AC |
| Rated operational current [Ie] | 180 A |
| Inductance [L] | 0.3 mH |
| (12 kHz) [Pv] | |
| Standards | 439 W |
| Operating temperature | |
| Storage temperature [ϑ] | IEC/EN 61558-2-20-2000, VDE 0570 Part 2-20/2001-04, UL, CSA |
| Mechanical shock resistance | -25 to +40, up to 70 with current derating (see the note) °C |
| Vibration resistance | -25 - +85 °C |
| Vibration | 11 ms2/15 3 shocks g |
| Altitude | 1 (0 - 150 Hz) g |
| Mounting position | 0.35 mm at 10 - 55 Hz |
| Free surrounding areas | 0 – 1000 above sea level, up to 5000 with current reduction (see notes) m |
| Degree of Protection | Standing vertically, suspended horizontally |
| Rated duty factor | < 50 MM |
| Weight | IP00 (connection lugs) |
| Rated operational voltage | 100 % DF |
| Max. supply voltage | 45 kg |
| Operating frequency [f] | |
| Insulation class | 3 AC 400 V |
| Rated operational current [Ie] | 750 V + 0% (0 - 400 Hz) V AC |
| Inductance [L] | 0…200 Hz |
| max. heat dissipation (pulse frequency) >(3 kHz) [Pv] |
F |
| max. heat dissipation (pulse frequency) >(5 kHz) [Pv] |
180 A |
| max. heat dissipation (pulse frequency) >(12 kHz) [Pv] |
0.3 mH |
| Connection lugs | 418 W |
| PE stud | 298 W |
| Connection lug | 439 W |
| Drilling | |
| Tightening torque | ✓ |
| Rated operational current for specified heat dissipation [In] | ✓ |
| Heat dissipation per pole, current-dependent [Pvid] | Cu 25 x 5 mm2 |
| Equipment heat dissipation, current-dependent [Pvid] | 11 mm |
| Static heat dissipation, non-current-dependent [Pvs] | 10 Nm |
| Heat dissipation capacity [Pdiss] | |
| Operating ambient temperature min. | The following applies for the installation altitude: Derating with respect to the rated operational current Ie:
|
| Operating ambient temperature max. | |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
180 A |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
0 W |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
418 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
0 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
-25 °C |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
+40 °C |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
|
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Suitable as interference suppression reactance coil | Is the panel builder´s responsibility. |
| Suitable as net reactance coil | Is the panel builder´s responsibility. |
| Suitable as commutation reactance coil | Is the panel builder´s responsibility. |
| Suitable as ripple filter choke | Is the panel builder´s responsibility. |
| Suitable as output reactance coil | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Number of poles, primary side | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Rated clock frequency | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Rated operation frequency | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Max. rated operation voltage Ue | |
| Rated current at AC | |
| Max. rated current (Ith) at rated voltage DC | No |
| Rated inductance | No |
| Degree of protection (IP) | No |
| Relative short circuit voltage | Yes |
| Resonance frequency | No |
| Degree of protection (NEMA) | 3 |
| Product Standards | 0 kHz |
| UL File No. | 0 - 200 Hz |
| UL Category Control No. | 750 V |
| CSA File No. | 180 - 180 A |
| North America Certification | 180 A |
| Specially designed for North America | 0.3 mH |
| Suitable for | IP00 |
| Max. Voltage Rating | 0 % |
| Degree of Protection | 0 Hz |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
