DMVS-160/3/SE5/P-G
197332 DMVS-160/3/SE5/P-G
Y7-197332

Switch-disconnector, DMV, 160 A, 3 pole, STOP function, with grey knob, in steel enclosure, 9 mm connection hole

Product range	Switch-disconnector Main switch maintenance switch
Part group reference	DMV
Stop Function	STOP function
Information about equipment supplied	with grey knob
Notes	auxiliary contact fitted by user. including connection materials
Number of poles	in steel enclosure
Notes	3 pole
Locking facility	0 N/O
Degree of Protection	0 N/C
Design	1 padlock, ∅ 5 mm
Contact sequence	Lockable in the 0 (Off) position
Switching angle	IP65
Function
400 V [P]	surface mounting
Rated uninterrupted current [Iu]
Note on rated uninterrupted current !u
Connection technique	90 °
Standards
Certifications	90 kW
Ambient temperature >Operation [ϑ]	160 A
Ambient temperature >Storage [ϑ]	Rated uninterrupted current Iu is specified for max. cross-section.
Overvoltage category/pollution degree	9 mm connection hole
Rated impulse withstand voltage [Uimp]	IEC/EN 60947, VDE 0660, IEC/EN 60204 Switch disconnector in accordance with IEC/EN 60947-3
Rated insulation voltage [Ui ]	CE
Mounting position	-25 - +55 °C
Mechanical variables >Number of poles	-30 - +80 °C
Mechanical variables >Auxiliary contacts 0 N/O Mechanical variables >Auxiliary contacts 0 N/C Electrical characteristics >Rated operational voltage [Ue]	III/3
Electrical characteristics >Rated uninterrupted current [Iu]	6 kV
Electrical characteristics >Note on rated uninterrupted current !u	1000 V
Short-circuit rating >fuse	As required
Short-circuit rating >Rated conditional short-circuit current [Iq]	3 pole
Short-circuit rating >Breaking current	0 N/O
Short-circuit rating >max. let-through energy	0 N/C
Rated short-time withstand current (1 s current) [Icw ]	690 V AC
Note on rated short-time withstand current lcw	160 A
Heat dissipation per pole, current-dependent [Pvid]	Rated uninterrupted current Iu is specified for max. cross-section.
Rated breaking capacity cos ϕ to IEC 60947-3 >400/415 V	125
Rated breaking capacity cos ϕ to IEC 60947-3 >500 V	100 kA
Rated breaking capacity cos ϕ to IEC 60947-3 >690 V	In = 500: 40 In = 250: 33 kA
Safe isolation to EN 61140 >Current heat loss per contact at Ie	In = 500: 1700 In = 250: 380 kA²s
Lifespan, mechanical [Operations]	12000 Arms
AC >AC-21A >Rated operational current switch >400 V 415 V [Ie]	Current for a time of 0.3 seconds
AC >AC-21A >Rated operational current switch >500 V [Ie]	8 W
AC >AC-21A >Rated operational current switch >690 V [Ie]	1280 A
AC >AC-22A >Rated operational current switch >400 V 415 V [Ie]	1248 A
AC >AC-22A >Rated operational current switch >500 V [Ie]	336 A
AC >AC-22A >Rated operational current switch >690 V [Ie]	8 W
AC >AC-23A >Rated operational current switch >400 V 415 V [Ie]	10000
AC >AC-23A >Rated operational current switch >500 V [Ie]	160 A
AC >AC-23A >Rated operational current switch >690 V [Ie]	160 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >400 V 415 V [P]	160 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >500 V [P]	160 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >690 V [P]	160 A
Flat conductor connection with busbars	160 A
Terminal screw	160 A
Tightening torque for terminal screw	66 A
Notes	42 A
Heat dissipation per pole, current-dependent [Pvid]	90 kW
Operating ambient temperature min.	45 kW
Operating ambient temperature max.	37 kW
Version as main switch	120 mm2
Version as maintenance-/service switch	M8 x 20
Version as safety switch	14 Nm
Version as emergency stop installation	B10d values as per EN ISO 13849-1, table C1
Version as reversing switch	8 W
Number of switches	-25 °C
Max. rated operation voltage Ue AC	+55 °C
Rated operating voltage	No
Rated permanent current Iu	Yes
Rated permanent current at AC-23, 400 V	No
Rated permanent current at AC-21, 400 V	No
Rated operation power at AC-3, 400 V	No
Rated short-time withstand current lcw	1
Rated operation power at AC-23, 400 V	690 V
Switching power at 400 V	690 - 690 V
Conditioned rated short-circuit current Iq	160 A
Number of poles	160 A
Number of auxiliary contacts as normally closed contact	160 A
Number of auxiliary contacts as normally open contact	0 kW
Number of auxiliary contacts as change-over contact	0 kA
Motor drive optional	90 kW
Motor drive integrated	90 kW
Voltage release optional	100 kA
Device construction	3
Suitable for ground mounting	0
Suitable for front mounting 4-hole	0
Suitable for front mounting centre	0
Suitable for distribution board installation	No
Suitable for intermediate mounting	No
Colour control element	No
Type of control element	Complete device in housing
Interlockable	Yes
Type of electrical connection of main circuit	No
Degree of protection (IP), front side	No
Degree of protection (NEMA)	No

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.