DILMP45-01(RDC24)
118916 DILMP45-01(RDC24)
118916

Contactor, 4 pole, 45 A, 1 NC, 24 V DC, DC operation
Contactor, Application: Contactors for 4 pole electric consumers, Contactors up to 200 A, 4 pole, Utilization category: AC-1: Non-inductive or slightly inductive loads, resistance furnaces, NAC-3: Normal AC induction motors: starting, switch off during running, Connection technique: Screw terminals, Number of poles: 4 pole, 380 V 400 V: Ie= 25 A, Conventional free air thermal current, 3 pole, 50 - 60 Hz Open at 40 °C: Ith =Ie= 45 A, enclosed: Ith= 36 A, Conventional free air thermal current, 1 pole open: Ith= 117 A, enclosed: Ith= 105 A, 220 V 230 V: P= 7.5 kW, 380 V 400 V: P= 11 kW, 660 V 690 V: P= 14 kW, Contacts N/C = Normally closed: 1 NC, Instructions: Contacts to EN 50 012., integrated suppressor circuit in actuating electronics, with mirror contact., Voltage AC/DC: DC operation

Product range	Contactors
Application	Contactors for 4 pole electric consumers
Subrange	Contactors up to 200 A, 4 pole
Utilization category	AC-1: Non-inductive or slightly inductive loads, resistance furnaces NAC-3: Normal AC induction motors: starting, switch off during running
Connection technique	Screw terminals
Number of poles	4 pole
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >at 40 °C [Ith =Ie]
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >at 50 °C [Ith =Ie]	45 A
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >at 55 °C [Ith =Ie]	41 A
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >at 60 °C [Ith =Ie]	40 A
N/C = Normally closed	39 A
Contact sequence
For use with	1 NC
Actuating voltage
Voltage AC/DC	DILM32-XHI(C)… DILA-XHI(V)(C)…
Connection to SmartWire-DT	24 V DC
Instructions	DC operation
Standards	yes in conjunction with DIL-SWD SmartWire DT contactor module
Lifespan, mechanical >AC operated [Operations]	Contacts to EN 50 012. integrated suppressor circuit in actuating electronics with mirror contact.
Lifespan, mechanical >DC operated [Operations]
Operating frequency, mechanical >AC operated [Operations/h]	IEC/EN 60947, VDE 0660, UL, CSA
Operating frequency, mechanical >DC operated [Operations/h]	10 x 106
Climatic proofing	10 x 106
Ambient temperature >Open	5000
Ambient temperature >Enclosed	5000
Ambient temperature >Storage	Damp heat, constant, to IEC 60068-2-3 Damp heat, cyclic, to IEC 60068-2-30
Mounting position >Mounting position	-25 - +60 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Main contacts >N/O contact	- 25 - 40 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/O contact	- 40 - 80 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/C contact
Degree of Protection	10 g
Altitude	7 g
Protection against direct contact when actuated from front (EN 50274)	5 g
Stripping length	IP00
Terminal capacity main cable >Solid	Max. 2000 m
Terminal capacity main cable >Flexible with ferrule	Finger and back-of-hand proof
Terminal capacity main cable >Stranded	10 mm
Terminal capacity main cable >Solid or stranded	1 x (0.75 - 16) 2 x (0.75 - 10) mm2
Terminal capacity main cable >Terminal screw	1 x (0.75 - 16) 2 x (0.75 - 10) mm2
Terminal capacity main cable >Tightening torque	1 x 16 mm2
Terminal capacity main cable >Stripping length	18 - 6 AWG
Terminal capacity main cable >Push-in terminals >Solid	M5
Terminal capacity main cable >Push-in terminals >flexible	3 Nm
Terminal capacity main cable >Push-in terminals >flexible with ferrules	10 mm
Terminal capacity main cable >Push-in terminals >Solid or stranded	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Terminal capacity control circuit cables >Solid	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Terminal capacity control circuit cables >Flexible with ferrule	1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2
Terminal capacity control circuit cables >Solid or stranded	18 - 14 AWG
Terminal capacity control circuit cables >Stripping length	1 x (0.75 - 4) 2 x (0.75 - 2.5) mm2
Terminal capacity control circuit cables >Terminal screw	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Terminal capacity control circuit cables >Tightening torque	18 - 14 AWG
Terminal capacity control circuit cables >Push-in terminals >Solid	10 mm
Terminal capacity control circuit cables >Push-in terminals >Flexible	M3.5
Terminal capacity control circuit cables >Push-in terminals >Flexible with ferrule	1.2 Nm
Terminal capacity control circuit cables >Push-in terminals >Solid or stranded	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Tool >Main cable >Pozidriv screwdriver	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Tool >Main cable >Standard screwdriver	1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2
Tool >Control circuit cables >Pozidriv screwdriver	18 - 14 AWG
Tool >Control circuit cables >Standard screwdriver	2 Size
Rated impulse withstand voltage [Uimp]	0.8 x 5.5 1 x 6 mm
Overvoltage category/pollution degree	2 Size
Rated insulation voltage [Ui]	0.8 x 5.5 1 x 6 mm
Rated operational voltage [Ue]
Safe isolation to EN 61140 >between coil and contacts	8000 V AC
Safe isolation to EN 61140 >between the contacts	III/3
Making capacity (cos ϕ) [Up to 690 V]	690 V AC
Breaking capacity >220 V 230 V	690 V AC
Breaking capacity >380 V 400 V	440 V AC
Breaking capacity >500 V	440 V AC
Breaking capacity >660 V 690 V	350 According to IEC/EN 60947 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “2” coordination >400 V [gG/gL 500 V]	250 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “2” coordination >690 V [gG/gL 690 V]	250 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “1” coordination >400 V [gG/gL 500 V]	250 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “1” coordination >690 V [gG/gL 690 V]	144 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	35 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 50 °C [Ith =Ie]	35 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 55 °C [Ith =Ie]	100 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 60 °C [Ith =Ie]	50 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >enclosed [Ith ]
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >open [Ith ]	45 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >enclosed [Ith ]	41 A
AC-1 >Motor rating [P] >220/230 V [P]	40 A
AC-1 >Motor rating [P] >240 V [P]	39 A
AC-1 >Motor rating [P] >380/400 V [P]	36 A
AC-1 >Motor rating [P] >415 V [P]	117 A
AC-1 >Motor rating [P] > 440 V [P]	105 A
AC-1 >Motor rating [P] >500 V [P]	16 kW
AC-1 >Motor rating [P] >690 V [P]	18 kW
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >Notes	28 kW
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie]	31 kW
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >240 V [Ie]	33 kW
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	37 kW
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >415 V [Ie]	49 kW
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >440V [Ie]	At maximum permissible ambient temperature (open.)
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >500 V [Ie]	25 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie]	25 A
AC-3 >Motor rating [P] >220 V 230 V [P]	25 A
AC-3 >Motor rating [P] >240V [P]	25 A
AC-3 >Motor rating [P] >380 V 400 V [P]	25 A
AC-3 >Motor rating [P] >415 V [P]	25 A
AC-3 >Motor rating [P] >440 V [P]	15 A
AC-3 >Motor rating [P] >500 V [P]	7.5 kW
AC-3 >Motor rating [P] >660 V 690 V [P]	8.5 kW
Rated operational current, open >DC-1 >60 V [Ie ]	11 kW
Rated operational current, open >DC-1 >110 V [Ie ]	14.5 kW
Rated operational current, open >DC-1 >220 V [Ie ]	15.5 kW
3 pole, at Ith (60°)	17.5 kW
Impedance per pole	14 kW
Voltage tolerance >AC operated 50/60 Hz
Voltage tolerance >DC operated [Pick-up]	45 A
Voltage tolerance >DC operated [Drop-out]	45 A
Power consumption of the coil in a cold state and 1.0 x US >Notes on DC actuation	45 A
Power consumption of the coil in a cold state and 1.0 x US >DC operated [Pick-up]
Power consumption of the coil in a cold state and 1.0 x US >DC operated [Sealing]	13.2 W
Duty factor	2.7 mΩ
Changeover time at 100 % US (recommended value) >Main contacts >DC operated >Notes on DC actuation
Changeover time at 100 % US (recommended value) >Main contacts >DC operated >Closing delay	0.85 - 1.1 x Uc
Changeover time at 100 % US (recommended value) >Main contacts >DC operated >Opening delay	At least double-pulse bridge rectifier - 0.7 - 1.2 x Uc
Changeover time at 100 % US (recommended value) >Arcing time	At least double-pulse bridge rectifier - 0.2 - 0.6 x Uc
Changeover time at 100 % US (recommended value) >Permissible residual current with actuation of A1 - A2 by the electronics (with 0 signal).	At least double-pulse bridge rectifier
Switching capacity >Maximum motor rating >Three-phase >200 V 208 V	12 W
Switching capacity >Maximum motor rating >Three-phase >230 V 240 V	0.9 W
Switching capacity >Maximum motor rating >Three-phase >460 V 480 V	100 % DF
Switching capacity >Maximum motor rating >Three-phase >575 V 600 V	At least double-pulse bridge rectifier
Switching capacity >Maximum motor rating >Single-phase >115 V 120 V	47 ms
Switching capacity >Maximum motor rating >Single-phase >230 V 240 V	30 ms
Switching capacity >General use	10 ms
Auxiliary contacts >Pilot Duty >AC operated	≦ 1 mA
Auxiliary contacts >Pilot Duty >DC operated
Auxiliary contacts >General Use >AC	7.5 HP
Auxiliary contacts >General Use >AC	10 HP
Auxiliary contacts >General Use >DC	15 HP
Auxiliary contacts >General Use >DC	20 HP
Short Circuit Current Rating >Basic Rating >SCCR	2 HP
Short Circuit Current Rating >Basic Rating >max. Fuse	5 HP
Short Circuit Current Rating >Basic Rating >max. CB	40 A
Short Circuit Current Rating >480 V High Fault >SCCR (fuse)	A600
Short Circuit Current Rating >480 V High Fault >max. Fuse	P300
Short Circuit Current Rating >480 V High Fault >SCCR (CB)	600 V
Short Circuit Current Rating >480 V High Fault >max. CB	10 A
Short Circuit Current Rating >600 V High Fault >SCCR (fuse)	250 V
Short Circuit Current Rating >600 V High Fault >max. Fuse	1 A
Short Circuit Current Rating >600 V High Fault >SCCR (CB)	5 kA
Short Circuit Current Rating >600 V High Fault >max. CB	125 A
Special Purpose Ratings >Electrical Discharge Lamps (Ballast) >480V 60Hz 3phase, 277V 60Hz 1phase	125 A
Special Purpose Ratings >Electrical Discharge Lamps (Ballast) >600V 60Hz 3phase, 347V 60Hz 1phase	10/100 kA
Special Purpose Ratings >Incandescent Lamps (Tungsten) >480V 60Hz 3phase, 277V 60Hz 1phase	125/70 Class J A
Special Purpose Ratings >Incandescent Lamps (Tungsten) >600V 60Hz 3phase, 347V 60Hz 1phase	10/65 kA
Special Purpose Ratings >Resistance Air Heating >480V 60Hz 3phase, 277V 60Hz 1phase	50/32 A
Special Purpose Ratings >Resistance Air Heating >600V 60Hz 3phase, 347V 60Hz 1phase	10/100 kA
Special Purpose Ratings >Refrigeration Control (CSA only) >LRA 480V 60Hz 3phase	125/100 Class J A
Special Purpose Ratings >Refrigeration Control (CSA only) >FLA 480V 60Hz 3phase	10/22 kA
Special Purpose Ratings >Refrigeration Control (CSA only) >LRA 600V 60Hz 3phase	50/32 A
Special Purpose Ratings >Refrigeration Control (CSA only) >FLA 600V 60Hz 3phase	40 A
Special Purpose Ratings >Definite Purpose Ratings (100,000 cycles acc. to UL 1995) >LRA 480V 60Hz 3phase	40 A
Special Purpose Ratings >Definite Purpose Ratings (100,000 cycles acc. to UL 1995) >FLA 480V 60Hz 3phase	40 A
Special Purpose Ratings >Elevator Control >200V 60Hz 3phase	40 A
Special Purpose Ratings >Elevator Control >200V 60Hz 3phase	40 A
Special Purpose Ratings >Elevator Control >240V 60Hz 3phase	40 A
Special Purpose Ratings >Elevator Control >240V 60Hz 3phase	240 A
Special Purpose Ratings >Elevator Control >480V 60Hz 3phase	40 A
Special Purpose Ratings >Elevator Control >480V 60Hz 3phase	180 A
Special Purpose Ratings >Elevator Control >600V 60Hz 3phase	30 A
Special Purpose Ratings >Elevator Control >600V 60Hz 3phase	150 A
Rated operational current for specified heat dissipation [In]	25 A
Heat dissipation per pole, current-dependent [Pvid]	3 HP
Equipment heat dissipation, current-dependent [Pvid]	11 A
Static heat dissipation, non-current-dependent [Pvs]	5 HP
Heat dissipation capacity [Pdiss]	15.2 A
Operating ambient temperature min.	10 HP
Operating ambient temperature max.	14 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	15 HP
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	17 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	45 A
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	4.4 W
10.2 Strength of materials and parts >10.2.5 Lifting	13.2 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0.9 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	0 W
10.3 Degree of protection of ASSEMBLIES	-25 °C
10.4 Clearances and creepage distances	+60 °C
10.5 Protection against electric shock
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Meets the product standard´s requirements.
Rated control supply voltage Us at AC 50HZ	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 60HZ	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at DC	Is the panel builder´s responsibility.
Voltage type for actuating	Is the panel builder´s responsibility.
Rated operation current Ie at AC-1, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-4, 400 V	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated operation power at AC-4, 400 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power NEMA	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Modular version	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of auxiliary contacts as normally open contact
Number of auxiliary contacts as normally closed contact
Type of electrical connection of main circuit	0 - 0 V
Number of normally closed contacts as main contact	0 - 0 V
Number of main contacts as normally open contact	24 - 27 V
Product Standards	DC
UL File No.	45 A
UL Category Control No.	25 A
CSA File No.	11 kW
CSA Class No.	15 A
North America Certification	7 kW
Specially designed for North America	11 kW
Accessories	No
Characteristic curve	0

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.