DILL20(230V50HZ,240V60HZ)
104408 DILL20(230V50HZ,240V60HZ)
104408

Lamp load contactor, 230 V 50 Hz, 240 V 60 Hz, 220 V 230 V: 20 A, Contactors for lighting systems
Lamp load contactors, Application: Contactors for lighting systems, Utilization category: AC-1: Non-inductive or slightly inductive loads, resistance furnaces, Rated operational current 380 V 400 V: Ie = 27 A, Rated operational current AC-1 Conventional free air thermal current, 3 pole, 50 - 60 Hz Open at 40 °C: Ith =Ie = 45 A, Actuating voltage: 230 V 50 Hz, 240 V 60 Hz, Standards: IEC/EN 60947, VDE 0660, UL, CSA, Degree of Protection: IP00

Product range	DILL Lighting contactors
Application	Contactors for lighting systems
Utilization category	AC-1: Non-inductive or slightly inductive loads, resistance furnaces
AC-5a >220 V 230 V [Ie ]
AC-5a >380 V 400 V [Ie ]	20 A
AC-5b >220 V 230 V [Ie]	20 A
AC-5b >380 V 400 V [Ie]	27 A
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	27 A
Contact sequence	45 A
Actuating voltage
Note	230 V 50 Hz, 240 V 60 Hz
Standards	Switchgear for lighting systems   DIL L12 L18 L20 M7 M9 M12 M17 M25 M32 M40 M50 Permissible compensation capacitance Cmax [mF] 470 470 470 47 80 100 220 330 470 470 500                           Filament lamp Ie [A] 14 21 27 6 7.5 10 14 21 27 33 42 Mercury blended lamps Ie [A] 12 16 23 5 6.5 8.5 12 16 23 30 38 Fluorescent lamps, conventional -reactor – starter – connection Ie [A] 20 26 35 9 10 15 20 26 35 41 45 Fluorescent lamps, conventional -reactor – starter – connection Ie [A] 20 26 35 5.5 8 13 15 22.5 29 36 47 Fluorescent lamps, duo circuit (series compensated) Ie [A] 12 18 20 5 6.5 8.5 12 17.5 22.5 28 35 electronic upstream devices and LED lamps Ie [A] 12 18 20 3.5 6 10 12 17.5 20 25 30 High-pressure mercury-arc lamps Ie [A] 12 18 20 3.5 6 10 12 17.5 20 25 30 Metal-halide lamps Ie [A] 12 18 20 3.5 6 10 12 17.5 20 25 30 Low-pressure sodium lamps Ie [A] 7.5 10 12 3 4 6 7.5 10 12 15 22                             DIL M65 M80 M95 M115 M150 M185A M225A M250A M300A M400A M500A Permissible compensation capacitance Cmax [mF] 500 550 620 830 970 2055 2300 2600 3000 3250 3500                           Filament lamp Ie [A] 55 67 79 95 125 153 187 208 349 332 415 Mercury blended lamps Ie [A] 45 65 67 80 110 123 150 167 200 266 332 Fluorescent lamps, conventional -reactor – starter – connection Ie [A] 55 95 100 125 145 207 237 263 300 375 525 Fluorescent lamps, conventional -reactor – starter – connection Ie [A] 59 71 95 100 138 186 213 236 270 338 473 Fluorescent lamps, duo circuit (series compensated) Ie [A] 45.5 56 66.5 80.5 105 130 158 175 210 280 350 electronic upstream devices and LED lamps Ie [A] 36 55 60 80 95 138 158 175 200 250 350 High-pressure mercury-arc lamps Ie [A] 36 55 60 80 95 138 158 175 200 250 350 Metal-halide lamps Ie [A] 36 55 60 80 95 138 158 175 200 250 350 Low-pressure sodium lamps Ie [A] 25 35 40 50 70 100 11 123 140 175 245                           In compensated lamps, the sum of the capacitances must not exceed the contactors´ max. permissible capacitor load (Cmax)! The values in the table are for each contact in the contactors.
Lifespan, mechanical >AC operated [Operations]
Operating frequency, mechanical >AC operated [Operations/h]	IEC/EN 60947, VDE 0660, UL, CSA
Climatic proofing	1 x 106
Ambient temperature >Open	60
Ambient temperature >Enclosed	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature >Storage	-25 - +60 °C
Mounting position	- 25 - 40 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Mechanical shock resistance	- 40 - 80 °C
Degree of Protection
Altitude	6.9 g
Weight >AC operated	IP00
Rated impulse withstand voltage [Uimp]	Max. 2000 m
Overvoltage category/pollution degree	0.42 kg
Rated insulation voltage [Ui]
Rated operational voltage [Ue]	8000 V AC
Making capacity	III/3
Breaking capacity [380 … 400 V]	690 V AC
Lifespan, electrical [Operations]	690 V AC
Short-circuit protection maximum fuse >400 V [gG/gL 500 V]	550 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	320 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 60 °C [Ith =Ie]	10000
AC-5a operation >220 V 230 V [Ie ]	125 A
AC-5a operation >380 V 400 V [Ie ]
AC-5b operation >220 V 230 V [Ie]	45 A
AC-5b operation >380 V 400 V [Ie]	40 A
AC-5b operation >380 V 400 V [Ie]	20 A
Electric lamps >Filament bulbs	20 A
Electric lamps >Mercury blended lamps	27 A
Electric lamps >Fluorescent lamp load >Conventional reactor starter circuit	27 A
Electric lamps >Fluorescent lamp load >Duo circuit	27 A
Electric lamps >Electronic upstream devices	27 A
Electric lamps >High-pressure mercury vapour lamps	23 A
Electric lamps >Metal-halide lamps	35 A
Electric lamps >High-pressure sodium lamps	35 A
Electric lamps >Low-pressure sodium lamps	20 A
Electric lamps >Maximum permissible compensation capacitance	20 A
like the contactar [DIL]	20 A
Switching capacity >General use	20 A
Short Circuit Current Rating >Basic Rating >SCCR	12 A
Short Circuit Current Rating >Basic Rating >max. Fuse	470 µF
Short Circuit Current Rating >Basic Rating >max. CB
Short Circuit Current Rating >480 V High Fault >SCCR (fuse)	M32
Short Circuit Current Rating >480 V High Fault >max. Fuse
Short Circuit Current Rating >480 V High Fault >SCCR (CB)	40 A
Short Circuit Current Rating >480 V High Fault >max. CB	5 kA
Short Circuit Current Rating >600 V High Fault >SCCR (fuse)	125 A
Short Circuit Current Rating >600 V High Fault >max. Fuse	125 A
Short Circuit Current Rating >600 V High Fault >SCCR (CB)	100 kA
Short Circuit Current Rating >600 V High Fault >max. CB	125 Class J A
Special Purpose Ratings >Incandescent Lamps (Tungsten) >480V 60Hz 3phase, 277V 60Hz 1phase	22 kA
Special Purpose Ratings >Incandescent Lamps (Tungsten) >600V 60Hz 3phase, 347V 60Hz 1phase	32 A
Rated operational current for specified heat dissipation [In]	100 kA
Heat dissipation per pole, current-dependent [Pvid]	125 Class J A
Equipment heat dissipation, current-dependent [Pvid]	22 kA
Static heat dissipation, non-current-dependent [Pvs]	32 A
Heat dissipation capacity [Pdiss]	40 A
Operating ambient temperature min.	40 A
Operating ambient temperature max.
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	27 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	1.5 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	4.5 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	2.1 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	-25 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	+60 °C
10.2 Strength of materials and parts >10.2.7 Inscriptions
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 50HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 60HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at DC	Is the panel builder´s responsibility.
Voltage type for actuating	Is the panel builder´s responsibility.
Rated operation current Ie at AC-1, 400 V	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated operation current Ie at AC-3, 400 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power at AC-3, 400 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation current Ie at AC-4, 400 V	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated operation power at AC-4, 400 V
Rated operation power NEMA
Modular version	230 - 230 V
Number of auxiliary contacts as normally open contact	240 - 240 V
Number of auxiliary contacts as normally closed contact	0 - 0 V
Type of electrical connection of main circuit	AC
Number of normally closed contacts as main contact	20 A
Number of main contacts as normally open contact	0 A
Product Standards	0 kW
UL File No.	0 A
UL Category Control No.	0 kW
CSA File No.	0 kW
CSA Class No.	No
North America Certification	0
Specially designed for North America	0

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.