DILER-22-G(12VDC)
080728 DILER-22-G(12VDC)
80728

Contactor relay, 12 V DC, N/O = Normally open: 2 N/O, N/C = Normally closed: 2 NC, Screw terminals, DC operation
Contactor relay, Product range: DILER Mini-contactors, Application: Contactor relays, Description: with interlocked opposing contacts, Connection technique: Screw terminals, Rated operational current Conventional free air thermal current, 1 pole Open at 50 °C: Ith =Ie= 10 A, Rated operational current AC-15 220 V 230 V 240 V: Ie= 6 A, 380 V 400 V 415 V: Ie= 3 A, Contacts N/O = Normally open: 2 N/O, Contacts N/C = Normally closed: 2 NC, Code number and version of combination Distinctive number: 22E, Actuating voltage: 12 V DC, Voltage AC/DC: DC operation, Degree of Protection: IP20, Instructions: Contact numbers to EN 50011, Coil terminal markings to EN 50005, Integrated diode-resistor combination, Coil rating 2.6 W, Standards: IEC/EN 60947, EN 60947-5-1, VDE 0660, UL, CSA

Product range	DILER Mini-contactors
Application	Contactor relays
Description	with interlocked opposing contacts
Connection technique	Screw terminals
Conventional free air thermal current, 1 pole >Open >at 50 °C [Ith =Ie]
AC-15 >220 V 230 V 240 V [Ie]	10 A
AC-15 >380 V 400 V 415 V [Ie]	6 A
N/O = Normally open	3 A
N/C = Normally closed
Contact sequence	2 N/O
Distinctive number	2 NC
Actuating voltage
Voltage AC/DC
Instructions	22E
Standards	12 V DC
Lifespan, mechanical >DC operated [Operations]	DC operation
Maximum operating frequency [Operations/h]	Contact numbers to EN 50011 Coil terminal markings to EN 50005 Integrated diode-resistor combination Coil rating 2.6 W
Climatic proofing
Ambient temperature >Open	IEC/EN 60947, EN 60947-5-1, VDE 0660, UL, CSA
Ambient temperature >Enclosed	20 x 106
Mounting position >Mounting position	9000
Mounting position >Mounting position	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit with auxiliary contact module >N/O contact	-25 - +50 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit with auxiliary contact module >N/C contact	- 25 - 40 °C
Degree of Protection	As required, except vertical with terminals A1/A2 at the bottom
Protection against direct contact when actuated from front (EN 50274)
Altitude	10 g
Weight >DC operated	8 g
Terminal capacities >Screw terminals >Solid	IP20
Terminal capacities >Screw terminals >Flexible with ferrule	Finger and back-of-hand proof
Terminal capacities >Screw terminals >Solid or stranded	Max. 2000 m
Terminal capacities >Screw terminals >Stripping length	0.211 kg
Terminal capacities >Screw terminals >Terminal screw	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Terminal capacities >Screw terminals >Pozidriv screwdriver	1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2
Terminal capacities >Screw terminals >Standard screwdriver	18 - 14 1 x (18 - 14) 2 x (18 - 14) AWG
Terminal capacities >Screw terminals >Max. tightening torque	8 mm
Interlocked opposing contacts to ZH 1/457, including auxiliary contact module	M3.5
Rated impulse withstand voltage [Uimp]	2 Size
Overvoltage category/pollution degree	0.8 x 5.5 1 x 6 mm
Rated insulation voltage [Ui]	1.2 Nm
Rated operational voltage [Ue]
Safe isolation to EN 61140 >between coil and auxiliary contacts	Yes
Safe isolation to EN 61140 >between the auxiliary contacts	6000 V AC
Rated operational current >Conventional free air thermal current, 1 pole >Open >at 50 °C [Ith =Ie]	III/3
Rated operational current >AC-15 >220 V 230 V 240 V [Ie]	690 V AC
Rated operational current >AC-15 >380 V 400 V 415 V [Ie]	600 V AC
Rated operational current >AC-15 >500 V [Ie]	300 V AC
Rated operational current >DC current >Notes	300 V AC
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [24 V]	10 A
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >2 [60 V]	6 A
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >3 [110 V]	3 A
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >3 [220 V]	1.5 A
Rated operational current >Control circuit reliability [Failure rate]	Switch-on and switch-off conditions based on DC-13, time constant as specified.
Short-circuit rating without welding >Maximum overcurrent protective device >220 V 230 V 240 V	2.5 A
Short-circuit rating without welding >Maximum overcurrent protective device >380 V 400 V 415 V	2.5 A
Short-circuit rating without welding >Short-circuit protection maximum fuse >500 V	1.5 A
Short-circuit rating without welding >Short-circuit protection maximum fuse >500 V	0.5 A
Current heat loss at Ith >DC operated	<10-8, < one failure at 100 million operations (at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA) λ
Voltage tolerance >DC operated >Notes	4 PKZM0
Voltage tolerance >DC operated >Pick-up voltage	4 PKZM0
Voltage tolerance >DC operated >at 24 V: without auxiliary contact component (40 °C) [Pick-up]	6 A gG/gL
Power consumption >DC operation >DC operated [Pull-in = sealing]	10 A fast
duty factor	1.1 W
Changeover time at 100 % US (recommended value) >DC operated closing delay
Changeover time at 100 % US (recommended value) >DC operated N/O contact opening delay	Smoothed DC, three-phase bridge rectifiers or smoothed double-wave rectification
Changeover time at 100 % US (recommended value) >DC operated With auxiliary contact module Max. closing delay	0.85 - 1.3
Auxiliary contacts >Pilot Duty >AC operated	0.7 - 1.3 x Uc
Auxiliary contacts >Pilot Duty >DC operated	2.3 W
Auxiliary contacts >General Use >AC	100 % DF
Auxiliary contacts >General Use >AC	26 - 35 ms
Auxiliary contacts >General Use >DC	15 - 25 ms
Auxiliary contacts >General Use >DC	70 ms
Rated operational current for specified heat dissipation [In]
Heat dissipation per pole, current-dependent [Pvid]	A600
Equipment heat dissipation, current-dependent [Pvid]	P300
Static heat dissipation, non-current-dependent [Pvs]	600 V
Heat dissipation capacity [Pdiss]	10 A
Operating ambient temperature min.	250 V
Operating ambient temperature max.	0.5 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	6 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0.4 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	2.3 W
10.2 Strength of materials and parts >10.2.5 Lifting	0 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	-25 °C
10.2 Strength of materials and parts >10.2.7 Inscriptions	+50 °C
10.3 Degree of protection of ASSEMBLIES
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 50HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 60HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at DC	Is the panel builder´s responsibility.
Voltage type for actuating	Is the panel builder´s responsibility.
Rated operation current Ie, 400 V	Is the panel builder´s responsibility.
Connection type auxiliary circuit	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Mounting method	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Interface	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of auxiliary contacts as normally closed contact	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of auxiliary contacts as normally open contact
Number of auxiliary contacts as normally closed contact, delayed switching
Number of auxiliary contacts as normally open contact, leading	0 - 0 V
With LED indication	0 - 0 V
Number of auxiliary contacts as change-over contact	12 - 12 V
Manual operation possible	DC
Product Standards	3 A
UL File No.	Screw connection
UL Category Control No.	DIN-rail/screw
CSA File No.	No
CSA Class No.	2
North America Certification	2
Specially designed for North America	0
Accessories	0
Characteristic curve	No

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.