Product range |
Accessories |
Accessories |
Current limiter |
Contact sequence |
Motor-protective circuit-breaker, non-auto-protected in order to increase switching capacity Max. Rated operational voltage Ue= 690 V Rated uninterrupted current Iu = 63 A |
Connection technique |
|
For use with |
Screw terminals |
For use with |
Current limiter PKZ0(4), PKE |
Notes |
PKZM0 PKM0 PKZM4 PKE |
Rated impulse withstand voltage [Uimp] |
Can be used for individual and group protection. For group protection and in combination with PKZM4, order additional BK25/3 connection terminal if required. Mounting next to or behind the motor protective circuit breaker. PKZM0: 16 - 32 A, 150 kA/440 V PKZM4: 16 - 63 A, 100 kA/400 V PKZM4: 16 - 63 A, 10 kA/690 V |
Overvoltage category/pollution degree |
|
Rated operational voltage [Ue] |
6000 V AC |
Rated uninterrupted current [Iu] |
III/3 |
Rated operational current for specified heat dissipation [In] |
690 V AC |
Heat dissipation per pole, current-dependent [Pvid] |
63 A |
Equipment heat dissipation, current-dependent [Pvid] |
|
Static heat dissipation, non-current-dependent [Pvs] |
63 A |
Heat dissipation capacity [Pdiss] |
2.8 W |
Operating ambient temperature min. |
8.4 W |
Operating ambient temperature max. |
0 W |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0 W |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
-25 °C |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
+55 °C |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
10.3 Degree of protection of ASSEMBLIES |
Meets the product standard´s requirements. |
10.4 Clearances and creepage distances |
Does not apply, since the entire switchgear needs to be evaluated. |
10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated. |
10.6 Incorporation of switching devices and components |
Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections |
Does not apply, since the entire switchgear needs to be evaluated. |
10.8 Connections for external conductors |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
10.10 Temperature rise |
Is the panel builder´s responsibility. |
10.11 Short-circuit rating |
Is the panel builder´s responsibility. |
10.12 Electromagnetic compatibility |
Is the panel builder´s responsibility. |
10.13 Mechanical function |
Is the panel builder´s responsibility. |
Max. apparent power |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Mounting method |
Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Conditioned rated short-circuit current Iq |
Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Rated permanent current Iu |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Short-circuit current limiter |
|
Product Standards |
|
UL File No. |
0 VA |
UL Category Control No. |
DIN rail |
CSA File No. |
0 kA |
CSA Class No. |
63 A |
North America Certification |
Yes |
Specially designed for North America |
UL 508; CSA-C22.2 No. 14; IEC60947-4-1; CE marking |