Insulated enclosure, IP65_x, +operating membrane, for PKZ01, NA typeInsulated enclosure for PKZM01, degree of protection IP65 integrated terminal for PE(N) connection., With operating membrane
Insulated enclosure, IP65_x, +operating membrane, for PKZ01, NA type
Insulated enclosure for PKZM01, degree of protection IP65 integrated terminal for PE(N) connection., With operating membrane
| Product range | Accessories |
| Subrange | Surface mounting enclosures |
| Accessories | Insulated enclosures for PKZ |
| Degree of Protection | with operating membrane |
| For use with | IP65 |
| Notes | PKZM01 +NHI-E or VHI-PKZ01 +U or A or NHI +L (2 off) |
| Rated operational current for specified heat dissipation [In] | North American design |
| Heat dissipation per pole, current-dependent [Pvid] | With integrated PE(N) terminal. In each case 2 metric M25 cable entry knockouts top and bottom. With thread and adapter for 1/2-inch screw connection. 2 metric M20 cable entry knockouts in the rear wall. Hard mirror with cable entry knockouts which can be cut out. |
| Equipment heat dissipation, current-dependent [Pvid] | |
| Static heat dissipation, non-current-dependent [Pvs] | 0 A |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | 0 W |
| Operating ambient temperature max. | 0 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
10 W |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
-25 °C |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
+70 °C |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Please enquire |
| 10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Material housing | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Width | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Height | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Depth | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| With transparent cover | |
| Suitable for emergency stop | |
| Model | Plastic |
| Degree of protection (IP) | 97 mm |
| Degree of protection (NEMA) | 160 mm |
| Product Standards | 80 mm |
| UL File No. | No |
| UL Category Control No. | No |
| CSA File No. | Surface mounting |
| CSA Class No. | IP65 |
| North America Certification | Other |
| Specially designed for North America | UL 508; CSA-C22.2 No. 14; IEC60947-4-1; CE marking |
| Degree of Protection | E36332 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
