Insulated enclosure, HxWxD=160x100x 130mm, for PKZ0, +rotary handle, red/yellowInsulated enclosure for PKZM0 with early-make auxiliary contact + rotary handle, red/yellow, degree of protection IP65, glass-fibre reinforced polycarbonate, enclosure base RAL 9005, black/operator only RAL 7035, light gray, 4 x 1/2 inches knockouts
Insulated enclosure, HxWxD=160x100x 130mm, for PKZ0, +rotary handle, red/yellow
Insulated enclosure for PKZM0 with early-make auxiliary contact + rotary handle, red/yellow, degree of protection IP65, glass-fibre reinforced polycarbonate, enclosure base RAL 9005, black/operator only RAL 7035, light gray, 4 x 1/2 inches knockouts
| Product range | Accessories |
| Subrange | Surface mounting enclosures |
| Accessories | Insulated enclosures for PKZ |
| Degree of Protection | with red-yellow rotary knob, for use as EMERGENCY STOP switch in accordance with EN 60204 |
| For use with | IP65 |
| Notes | PKZM0-… +VHI… + U… +L-PKZ0 (2 off) |
| Rated operational current for specified heat dissipation [In] | North American design |
| Heat dissipation per pole, current-dependent [Pvid] | With integrated N and PE terminal. Without cable entry knockouts. Hard mirror with in each case 2 holes top and bottom which can be drilled out. |
| Equipment heat dissipation, current-dependent [Pvid] | |
| Static heat dissipation, non-current-dependent [Pvs] | 0 A |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | 0 W |
| Operating ambient temperature max. | 0 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
12.5 W |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
-25 °C |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
+70 °C |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Please enquire |
| 10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Material housing | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Width | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Height | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Depth | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| With transparent cover | |
| Suitable for emergency stop | |
| Model | Plastic |
| Degree of protection (IP) | 100 mm |
| Degree of protection (NEMA) | 160 mm |
| Product Standards | 130 mm |
| UL File No. | No |
| UL Category Control No. | Yes |
| CSA File No. | Surface mounting |
| CSA Class No. | IP65 |
| North America Certification | 12 |
| Specially designed for North America | UL 508; CSA-C22.2 No. 14; IEC60947-4-1; CE marking |
| Degree of Protection | E36332 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
