Surface-mount service distribution board with three-point turn-lock, W = 1200 mm, H = 1260 mmSurface-mounted service distribution board with cam lock - completely assembled, IP30, gray, RAL 7035, width 1200 mm, outside height 1260 mm, front plate height 1150 mm, incl. base frame, enclosure side plates, base/roof panels and door, includes top cable entry, with push-through flange, with blanking bottom panels, mounted on base frame - no MSW mounting kit, module design, earthed metal covers, completely mounted, can be grouped, ample wiring area, variable interior fittings with or without removable mounting frame, well-structured, multilayered design for easily accessible installation: base frame - DIN-rails ... - enclosure, door can be right-hand or left-hand door
Surface-mount service distribution board with three-point turn-lock, W = 1200 mm, H = 1260 mm
Surface-mounted service distribution board with cam lock - completely assembled, IP30, gray, RAL 7035, width 1200 mm, outside height 1260 mm, front plate height 1150 mm, incl. base frame, enclosure side plates, base/roof panels and door, includes top cable entry, with push-through flange, with blanking bottom panels, mounted on base frame - no MSW mounting kit, module design, earthed metal covers, completely mounted, can be grouped, ample wiring area, variable interior fittings with or without removable mounting frame, well-structured, multilayered design for easily accessible installation: base frame - DIN-rails ... - enclosure, door can be right-hand or left-hand door
| Mounting type | Surface mounted |
| Material | Sheet steel |
| Door interlock | Three-point turn-lock |
| Installation site | Indoor |
| Degree of Protection | IP30 |
| Surface finish | With powder coating |
| Width | 1200 mm |
| Depth | 262 mm |
| Height | 1260 mm |
| Colour | light gray (RAL 7035) |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV] |
187 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure for wall mounting [PV] |
180 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure for wall mounting [PV] |
175 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV] |
375 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure for wall mounting [PV] |
361 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure for wall mounting [PV] |
351 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Not relevant to indoor installations. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Does not apply to enclosures without lifting aids. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
IK07 |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | IP30 |
| 10.4 Clearances and creepage distances | Is the panel builder´s responsibility. |
| 10.5 Protection against electric shock | < 0.1 Ω; meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Is the panel builder´s responsibility. |
| 10.7 Internal electrical circuits and connections | Is the panel builder´s responsibility. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Ui = 440 V AC |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
4 kV |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply to metal enclosures. |
| 10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Meets the product standard´s requirements. |
| Mounting method | Surface mounted (plaster) |
| Number of rows | 9 |
| Width in number of modular spacings | 57 |
| Type of cover | Door |
| Cover model | Closed |
| Transparent cover/door | No |
| Material housing | Steel |
| Height | 1260 mm |
| Width | 1200 mm |
| Depth | 262.5 mm |
| Built-in depth | 0 mm |
| Internal depth | 257.5 mm |
| DIN-rail | No |
| With mounting plate | No |
| Extension possible | Yes |
| EMC-version | No |
| Colour | Grey |
| RAL-number | 7035 |
| Degree of protection (IP) | IP30 |
| With lock | No |
| Type of closure | Other |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
