Extension terminal, 3p, 25mm²Connection clamp, Product range: Accessories, For use with: PKZM0, PKE12, PKE32
Extension terminal, 3p, 25mm²
Connection clamp, Product range: Accessories, For use with: PKZM0, PKE12, PKE32
| Product range | Accessories |
| Accessories | Incoming terminal |
| For use with | PKZM0 PKE12 PKE32 |
| Notes | Type E starters do not need an upstream protective device. For use in Canada, the PKZM0/PKZM4 must be fitted with an AK-PKZ0. Service factor (SF) Set value Ir on the current scale, depending on the load factor SF = 1.15 ￫ Ir = 1 x In mot SF = 1 ￫ Ir = 0.9 x In mot |
| Notes | For three-phase commoning link, protected against accidental contact, Ue = 690 V, Iu = 60 A For conductor cross-sections: 2.5 - 25 mm2 stranded 2.5 - 16 mm2 Flexible with ferrule AWG 14 - 6 For surface-mounting type-E starters. |
| Rated operational current for specified heat dissipation [In] | |
| Heat dissipation per pole, current-dependent [Pvid] | 63 A |
| Equipment heat dissipation, current-dependent [Pvid] | 1.8 W |
| Static heat dissipation, non-current-dependent [Pvs] | 5.4 W |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | 0 W |
| Operating ambient temperature max. | -25 °C |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+55 °C |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
|
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. |
| 10.12 Electromagnetic compatibility | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Busbar thickness | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Busbar width | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Suitable for | |
| Width clamp | |
| Max. conductor cross section | 0 - 0 mm |
| Max. rated operation current Ie | 0 - 0 mm |
| Suitable for round conductor connection | Other |
| Suitable for sector conductor connection | 45 mm |
| Suitable for strip conductor connection | 25 mm² |
| Product Standards | 63 A |
| UL File No. | Yes |
| UL Category Control No. | No |
| CSA File No. | No |
| CSA Class No. | UL 508; CSA-C22.2 No. 14; IEC60947-4-1; CE marking |
| North America Certification | E36332 |
| Specially designed for North America | NLRV |
| Suitable for | 98494 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
