Product range |
Accessories |
Accessories |
Standard auxiliary contact |
N/O = Normally open |
|
N/C = Normally closed |
1 N/O |
Contact diagram |
1 NC |
Contact sequence |
|
Connection technique |
|
For use with |
Screw terminals |
Notes |
PKZ0(4) standard auxiliary contacts |
Rated impulse withstand voltage [Uimp] |
When ordered with basic unit |
Overvoltage category/pollution degree |
Can be fitted to: Motor protective circuit-breaker Transformer-protective circuit-breaker Motor protective circuit breaker for starter combinations (From serial number 01) 45 mm (PKZM0 and PKZM01) or 55 mm (PKZM4) widths of the motor-protective circuit-breakers remain unchanged. |
Rated operational voltage [Ue] [Ue] |
|
Rated operational voltage [Ue] [Ue
] |
4000 V AC |
Safe isolation to EN 61140 >Between auxiliary contacts and main contacts |
III/3 |
Rated operational current [Ie
] >AC-15 >220 - 240 V [Ie] |
440 V AC |
Rated operational current [Ie
] >DC-13 L/R - 100 ms >24 V [Ie
] |
250 V DC |
Lifespan >Lifespan, mechanical [Operations] |
690 V AC |
Lifespan >Lifespan, electrical [Operations] |
1 A |
Short-circuit rating without welding >Fuse |
2 A |
Solid or flexible conductor, with ferrule |
> 0.1 x 106 |
Solid or stranded |
0.1 x 106
|
Pilot Duty >AC operated |
10 A gG/gL |
General Use >DC |
|
General Use >DC |
0,75 - 1,5 mm2
|
Rated operational current for specified heat dissipation [In] |
18 - 16 AWG |
Heat dissipation per pole, current-dependent [Pvid] |
|
Equipment heat dissipation, current-dependent [Pvid] |
E150 |
Static heat dissipation, non-current-dependent [Pvs] |
250 V |
Heat dissipation capacity [Pdiss] |
0.5 A |
Operating ambient temperature min. |
|
Operating ambient temperature max. |
1 A |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0.01 W |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
0 W |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
0 W |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
-25 °C |
10.2 Strength of materials and parts >10.2.5 Lifting |
+55 °C |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
|
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
10.3 Degree of protection of ASSEMBLIES |
Meets the product standard´s requirements. |
10.4 Clearances and creepage distances |
Meets the product standard´s requirements. |
10.5 Protection against electric shock |
Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components |
Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections |
Does not apply, since the entire switchgear needs to be evaluated. |
10.8 Connections for external conductors |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
10.10 Temperature rise |
Does not apply, since the entire switchgear needs to be evaluated. |
10.11 Short-circuit rating |
Does not apply, since the entire switchgear needs to be evaluated. |
10.12 Electromagnetic compatibility |
Is the panel builder´s responsibility. |
10.13 Mechanical function |
Is the panel builder´s responsibility. |
Number of contacts as change-over contact |
Is the panel builder´s responsibility. |
Number of contacts as normally open contact |
Is the panel builder´s responsibility. |
Number of contacts as normally closed contact |
Is the panel builder´s responsibility. |
Number of fault-signal switches |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Rated operation current Ie at AC-15, 230 V |
Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Type of electric connection |
Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Model |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Mounting method |
|
Lamp holder |
|
Product Standards |
0 |
UL File No. |
1 |
UL Category Control No. |
1 |
CSA File No. |
0 |
CSA Class No. |
1 A |
North America Certification |
Screw connection |
Specially designed for North America |
Top mounting |
Accessories |
Front fastening |