SKU: Eaton-101459
Busbar adapter, 55 mm, 63 A, DIN rail: 2
55mm busbar adapter for 60mm busbar system, two mounting rails, three prefabricated cables (AWG8/10 square millimeter) for connection of switching device, can be used for DOL starter with PKZM4 / PKE65 with contactor DILM40 to DILM65, rated operational current: 63A
Accessories | Busbar adapters |
For use with | Approved to UL 508 For fitting to flat Cu-busbars with 60 mm between busbar centres, suitable for 5 mm and 10 mm busbar thickness Rated operational current 63 A For DOL Starter |
Rated operational voltage [Ue] | Busbar adapter PKZM4 |
Rated operational current [Ie] | 690 V |
Terminal capacity | 63 A |
Adapter width | AWG 8 (10 mm²) |
Adapter length | 55 mm |
DIN rail | 260 mm |
Adapter width | 2 Quantity |
For use with | 55 mm |
Notes | PKZM4, PKE65 + DILM(C)17 PKZM4, PKE65 + DILM(C)25 PKZM4, PKE65 + DILM(C)32 PKZM4, PKE65 + DILM(C)40 PKZM4, PKE65 + DILM(C)50 PKZM4, PKE65 + DILM(C)65 |
Rated operational current for specified heat dissipation [In] | Can be used in combination with individual components PKZM4, PKE65 + DILM40 to DILM65 electrical contact module PKZM4‐XM65DE. |
Heat dissipation per pole, current-dependent [Pvid] | 63 A |
Equipment heat dissipation, current-dependent [Pvid] | 0 W |
Static heat dissipation, non-current-dependent [Pvs] | 6.9 W |
Heat dissipation capacity [Pdiss] | 0 W |
Operating ambient temperature min. | 0 W |
Operating ambient temperature max. | -25 °C |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+55 °C |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
10.5 Protection against electric shock | Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
10.8 Connections for external conductors | Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
10.10 Temperature rise | Is the panel builder´s responsibility. |
10.11 Short-circuit rating | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Mounting rail armament | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Type of electric connection | 2 mounting rails |
Rated current In | Round conductor |
Min. busbar thickness | 63 A |
Max. busbar thickness | 5 mm |
Width of the adapter | 10 mm |
Rail width | 55 mm |
Busbar distance | 35 mm |
Product Standards | 60 mm |
UL File No. | UL 508A; CSA-C22.2 No. 14; IEC60439-1; CE marking |
UL Category Control No. | E300273 |
North America Certification | NMTR; NMTR7 |
Specially designed for North America | UL listed, certified by UL for use in Canada |
Max. Voltage Rating | No |