SKU: Nidec-FXMP25
The FXMP25 external field controller may be connected digitally to a Mentor MP using a standard RJ45 connection, allowing setup by standard drive parameters.
The FXMP25 can also function in standalone mode using its integrated keypad and display.
Every Mentor MP has a motor field controller as standard that provides excellent field control for the majority of DC motors. However, in the following situations, the optional FXMP25 external field controller is recommended:
Easy upgrade
The new FXMP25 replaces our existing FXM5 option. It may also be controlled digitally by a Mentor II, allowing set-up by standard drive parameters. The FXMP25 has the same physical dimensions as the existing FXM5, but extends its current range to 25 A.
High current fields
For field currents above 25 A, a separate Mentor MP DC drive can be used as a field controller.
Continuous AC input: 26 AContinuous DC output current: 25 A
Inputs and OutputsFUNCTION
QTY
I/O DEFAULT FUNCTION
RATING
Digital input
1
Field economy level
+24V
Analog input
1
Current demand input
0 to 10V
Analog output
2
Field current output signalArmature voltage output signal
0 to 10V
Relay
3
Fail relay
Normally open and normally closed
Overall dimensions
Height: 247 mm (9.72 in)Width: 192.38 mm (7.57 in) Depth: 90.27 mm (3.55 in)
The FXMP25 external field controller may be connected digitally to a Mentor MP using a standard RJ45 connection, allowing setup by standard drive parameters.
The FXMP25 can also function in standalone mode using its integrated keypad and display.
Every Mentor MP has a motor field controller as standard that provides excellent field control for the majority of DC motors. However, in the following situations, the optional FXMP25 external field controller is recommended:
Easy upgrade
The new FXMP25 replaces our existing FXM5 option. It may also be controlled digitally by a Mentor II, allowing set-up by standard drive parameters. The FXMP25 has the same physical dimensions as the existing FXM5, but extends its current range to 25 A.
High current fields
For field currents above 25 A, a separate Mentor MP DC drive can be used as a field controller.
Continuous AC input: 26 AContinuous DC output current: 25 A
Inputs and OutputsFUNCTION
QTY
I/O DEFAULT FUNCTION
RATING
Digital input
1
Field economy level
+24V
Analog input
1
Current demand input
0 to 10V
Analog output
2
Field current output signalArmature voltage output signal
0 to 10V
Relay
3
Fail relay
Normally open and normally closed
Overall dimensions
Height: 247 mm (9.72 in)Width: 192.38 mm (7.57 in) Depth: 90.27 mm (3.55 in)