SKU: Nidec-C300-01200042A10101AB100
Open Loop AC Drive with Dual Safe Torque Off Channels
1HP 4.2A
50/60Hz 230VAC Single Phase Input, 230VAC 3 Phase Output
0.33 hp – 200 hp (0.25 kW – 132 kW) Normal Duty0.33 hp – 150 hp (0.25 kW – 110 kW) Heavy Duty115 V | 208 - 240 V | 380 - 480 V
Commander variable speed drives have established the standard of excellence in motor control since 1983 when Control Techniques launched the first world commercial vector drive. Since then, Commander has undergone several successful enhancements, each time bringing new technology and innovations to the world of automation.
The new Commander C series has been designed to be a simple and compact AC motor speed controller that meets advanced requirements for a wide range of applications while optimizing the user experience.
Commander C Highlights✓ Set just 4 parameters to get your drive started✓ Plug-in options for advanced control✓ Dual Safe Torque Off (STO)✓ Equipped with the latest energy saving features✓ Up to 180% overload for high torque applications✓ On board PLC✓ Straightforward installation and commissioning✓ Easy motor pairing and performance control✓ Robust and reliable design
Simple set up. 3 steps to control Setting up a drive can require training, specialist knowledge and time.
But Commander C will get you up and running, from out of the box to controlling your motor, in minutes.
Three simple steps will set up your drive for most fan, pump, compressor, conveyor and general purpose applications!
Storage Temperature
Size 1 - 4: -40°C to 60°C (-40°F to 140°F) — 24 months Max.Size 5 - 9: -40°C to 55°C (-40°F to 131°F) — 24 months Max. Altitude De-rate the continuous output current by 1% for every 100 m (328 ft) above 1000 m (3,280 ft) to a maximum of 3000 m (9,840 ft) Vibration Tested in accordance with IEC 60068-2-64 and IEC 60068-2-6 Mechanical Shock Tested in accordance with IEC 60068-2-27 and IEC 60068-2-29 Enclosure Rating IP20, NEMA 1 conduit kits available Electromagnetic Capability IEC/ EN 61800-3 Immunity and EmissionsEN 61000-6-2: Immunity for industrial environmentsEN 61000-6-4: Emissions for industrial environmentsM/br> EN 61000-3-2: Harmonic current emissionsAn EMC data sheet is available on request RoHS Complies with the Restriction of Hazardous Substances Directive (2011/65/EU) AC Supply Requirements Voltage 100 V models: 100 to 120 Vac ±10%200 V models: 200 to 240 Vac ±10%400 V models: 380 to 480 Vac ±10% Phase 1Ø and 3Ø (Model dependent) Maximum Supply Imbalance 2% negative phase sequence, 3% voltage imbalance between phases Input Frequency 45 to 66 Hz Input Displacement Power Factor 0.97 Control Switching Frequency Size 1 - 4: 0.667, 1, 2, 3, 4, 6, 8 12 & 16 kHzSize 5 - 9: 2, 3, 4, 6, 8 12 & 16 kHz Output Frequency Range 0 to 550 Hz Frequency Accuracy ±0.02% of full scale Frequency Resolution 0.01 Hz Analog Input Resolution Voltage mode: 11 bits (unipolar) Current mode: 11 bits Braking Dynamic braking transistor included, requires external resistor Protection DC Bus Undervoltage Trip 100 V models: 175 Vdc200 V models: 175 Vdc400 V models: 330 Vdc DC Bus Overvoltage Trip Frame sizes 1 - 4:100 V models: 510 Vdc200 V models: 510 Vdc400V models: 870 Vdc Frame size 5 - 9:200V models: 415 Vdc400 V models: 830 Vdc Drive Overload Trip Programmable: Default settings: 180% for 3s, 150% for 60s Instantaneous Overcurrent Trip 220% of rated motor current Phase Loss Trip DC bus ripple threshold exceeded Over-temperature Trip Drive heatsink temperature exceeds 95°C (203°F) Short Circuit Trip Protects against output phase-to-phase fault Ground Fault Trip Protects against output phase-to-ground fault Motor Thermal Trip Electronically protects the motor from overheating due to loading conditions Approval & Listings UL, cUL UL file NMMS/8: E171230 CE CE approval EU These products comply with the Restriction of Hazardous Substances Directive (2011/65/EU), the Low Voltage Directive (2014/35/EU) and the Electromagnetic Compatibility Directive, (2014/30/EU). RCM RCM Registered supplier No. 12003815281 ISO Manufacturing facilities comply with ISO 9001:2015 and ISO 14001 TÜVC300 models only: The Safe Torque Off (STO) function may be used as a safety component of a machine.
Type examination certificates by TÜV Rheinland:Frame sizes 1 - 4: No. 01/205/5383.03/18Frame sizes 5 - 9: No. 01/205/5387.02/18
Functional safety parameters:EN ISO 13849-1 - Cat 4, PLeEN61800-5-2/EN62061/IEC 61508 - SIL 3
UL functional safety approval: FSPC E171230
The Commander series are simple and compact AC motor speed controllers that meet advanced requirements in a wide range of applications. Their small footprint – among the smallest in their class – makes them ideal for machine builders and OEMs, where space is at a premium.
Pumping, Ventilating & Compressing 
Conveying 
Lifting, Hoisting & Winching 
Access Control 
Processing (Mixers, Kneaders, Crushers, Agitators, Centrifuges, Extruders) Options Keypads
Remote Keypad RTC
The keypad is remote mountable, allowing flexible mounting on the outside of a panel (meets IP54/NEMA 12). Three line plain text, multi-language LCD keypad for rapid set-up and helpful diagnostics. Battery operated real-time clock allows accurate time stamping of events, aiding diagnostics.
Remote Keypad
Remote mountable, intuitive plain text, multilingual LCD keypad for rapid set-up and superior diagnostics (using the AI-485 adaptor along with a comms lead). Rapid and secure panel fit with 1 x 32mm hole rated to IP66 (NEMA 4).
System Integration Modules - CommunicationsSI-PROFIBUS
SI-PROFIBUS interface module enables follower connectivity. It is possible to use multiple SI-PROFIBUS modules or a combination of SI-PROFIBUS and other option module types to add additional functionality such as extended I/O, gateway functionality or additional PLC features.
SI-DeviceNet
SI-DeviceNet enables follower connectivity. It is possible to use multiple SI-DeviceNet modules to provide additional functionality.
SI-CANopen
Commander C´s SI-CANopen interface module supports various profiles, offering optimum flexibility.
SI-Ethernet
SI-Ethernet can be used to provide high speed drive access, global connectivity and integration with IT network technologies.
SI-EtherCAT
SI-EtherCAT allows Commander C general purpose drive to connect and interface with EtherCAT networks.
SI-PROFINET-V2
SI-PROFINET-V2 allows Commander C to communicate and interface with PROFINET PLCs and networks.
System Integration Modules - Additional I/OSI-I/O
Extended I/O interface module to increase the number of I/O points on a drive. Provides additional: 4 x Digital I/O, 3 x Analog inputs (default)/Digital inputs, 1 x Analog output (default)/Digital input, 2 x Relays.
Optional Accessories
AI-BACKUP-ADAPTOR
Port adaptor for SD card parameter cloning, and an input for 24 V back-up.
AI-SMART-ADAPTOR
Has a built-in memory for parameter cloning and an input for 24 V back-up.
AI-485-ADAPTOR
Adaptor that allows the drive to communicate via RS485.
AI-485 24 V Adaptor
Adaptor with 24 V input.
CT-USB-CABLE
The USB comms cable allows the drive to connect to a PC for use with Commander´s PC tools.
Connect - Commissioning tool Based on Control Techniques’ 25 years´ experience, Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance.
DOWNLOAD Advanced machine control
Machine Control Studio - Programming tool Control Techniques´ Machine Control Studio provides a flexible and intuitive environment for programming Commander C’s new automation and motion control features.
DOWNLOAD Diagnostics Tool
Diagnostic Tool Diagnostic Tool is a fast and simple tool, which allows users of Control Techniques´ drives to quickly solve any error codes that the drive may show.
DOWNLOAD Drive Setup
Drive Setup Free access web pages provide ‘how-to’ videos, step by step guides and comprehensive technical manuals for your installation.
www.drive-setup.com
Open Loop AC Drive with Dual Safe Torque Off Channels
1HP 4.2A
50/60Hz 230VAC Single Phase Input, 230VAC 3 Phase Output
0.33 hp – 200 hp (0.25 kW – 132 kW) Normal Duty0.33 hp – 150 hp (0.25 kW – 110 kW) Heavy Duty115 V | 208 - 240 V | 380 - 480 V
Commander variable speed drives have established the standard of excellence in motor control since 1983 when Control Techniques launched the first world commercial vector drive. Since then, Commander has undergone several successful enhancements, each time bringing new technology and innovations to the world of automation.
The new Commander C series has been designed to be a simple and compact AC motor speed controller that meets advanced requirements for a wide range of applications while optimizing the user experience.
Commander C Highlights✓ Set just 4 parameters to get your drive started✓ Plug-in options for advanced control✓ Dual Safe Torque Off (STO)✓ Equipped with the latest energy saving features✓ Up to 180% overload for high torque applications✓ On board PLC✓ Straightforward installation and commissioning✓ Easy motor pairing and performance control✓ Robust and reliable design
Simple set up. 3 steps to control Setting up a drive can require training, specialist knowledge and time.
But Commander C will get you up and running, from out of the box to controlling your motor, in minutes.
Three simple steps will set up your drive for most fan, pump, compressor, conveyor and general purpose applications!
Storage Temperature
Size 1 - 4: -40°C to 60°C (-40°F to 140°F) — 24 months Max.Size 5 - 9: -40°C to 55°C (-40°F to 131°F) — 24 months Max. Altitude De-rate the continuous output current by 1% for every 100 m (328 ft) above 1000 m (3,280 ft) to a maximum of 3000 m (9,840 ft) Vibration Tested in accordance with IEC 60068-2-64 and IEC 60068-2-6 Mechanical Shock Tested in accordance with IEC 60068-2-27 and IEC 60068-2-29 Enclosure Rating IP20, NEMA 1 conduit kits available Electromagnetic Capability IEC/ EN 61800-3 Immunity and EmissionsEN 61000-6-2: Immunity for industrial environmentsEN 61000-6-4: Emissions for industrial environmentsM/br> EN 61000-3-2: Harmonic current emissionsAn EMC data sheet is available on request RoHS Complies with the Restriction of Hazardous Substances Directive (2011/65/EU) AC Supply Requirements Voltage 100 V models: 100 to 120 Vac ±10%200 V models: 200 to 240 Vac ±10%400 V models: 380 to 480 Vac ±10% Phase 1Ø and 3Ø (Model dependent) Maximum Supply Imbalance 2% negative phase sequence, 3% voltage imbalance between phases Input Frequency 45 to 66 Hz Input Displacement Power Factor 0.97 Control Switching Frequency Size 1 - 4: 0.667, 1, 2, 3, 4, 6, 8 12 & 16 kHzSize 5 - 9: 2, 3, 4, 6, 8 12 & 16 kHz Output Frequency Range 0 to 550 Hz Frequency Accuracy ±0.02% of full scale Frequency Resolution 0.01 Hz Analog Input Resolution Voltage mode: 11 bits (unipolar) Current mode: 11 bits Braking Dynamic braking transistor included, requires external resistor Protection DC Bus Undervoltage Trip 100 V models: 175 Vdc200 V models: 175 Vdc400 V models: 330 Vdc DC Bus Overvoltage Trip Frame sizes 1 - 4:100 V models: 510 Vdc200 V models: 510 Vdc400V models: 870 Vdc Frame size 5 - 9:200V models: 415 Vdc400 V models: 830 Vdc Drive Overload Trip Programmable: Default settings: 180% for 3s, 150% for 60s Instantaneous Overcurrent Trip 220% of rated motor current Phase Loss Trip DC bus ripple threshold exceeded Over-temperature Trip Drive heatsink temperature exceeds 95°C (203°F) Short Circuit Trip Protects against output phase-to-phase fault Ground Fault Trip Protects against output phase-to-ground fault Motor Thermal Trip Electronically protects the motor from overheating due to loading conditions Approval & Listings UL, cUL UL file NMMS/8: E171230 CE CE approval EU These products comply with the Restriction of Hazardous Substances Directive (2011/65/EU), the Low Voltage Directive (2014/35/EU) and the Electromagnetic Compatibility Directive, (2014/30/EU). RCM RCM Registered supplier No. 12003815281 ISO Manufacturing facilities comply with ISO 9001:2015 and ISO 14001 TÜVC300 models only: The Safe Torque Off (STO) function may be used as a safety component of a machine.
Type examination certificates by TÜV Rheinland:Frame sizes 1 - 4: No. 01/205/5383.03/18Frame sizes 5 - 9: No. 01/205/5387.02/18
Functional safety parameters:EN ISO 13849-1 - Cat 4, PLeEN61800-5-2/EN62061/IEC 61508 - SIL 3
UL functional safety approval: FSPC E171230
The Commander series are simple and compact AC motor speed controllers that meet advanced requirements in a wide range of applications. Their small footprint – among the smallest in their class – makes them ideal for machine builders and OEMs, where space is at a premium.
Pumping, Ventilating & Compressing Conveying Lifting, Hoisting & Winching Access Control Processing (Mixers, Kneaders, Crushers, Agitators, Centrifuges, Extruders) Options Keypads
Remote Keypad RTC
The keypad is remote mountable, allowing flexible mounting on the outside of a panel (meets IP54/NEMA 12). Three line plain text, multi-language LCD keypad for rapid set-up and helpful diagnostics. Battery operated real-time clock allows accurate time stamping of events, aiding diagnostics.
Remote Keypad
Remote mountable, intuitive plain text, multilingual LCD keypad for rapid set-up and superior diagnostics (using the AI-485 adaptor along with a comms lead). Rapid and secure panel fit with 1 x 32mm hole rated to IP66 (NEMA 4).
System Integration Modules - CommunicationsSI-PROFIBUS
SI-PROFIBUS interface module enables follower connectivity. It is possible to use multiple SI-PROFIBUS modules or a combination of SI-PROFIBUS and other option module types to add additional functionality such as extended I/O, gateway functionality or additional PLC features.
SI-DeviceNet
SI-DeviceNet enables follower connectivity. It is possible to use multiple SI-DeviceNet modules to provide additional functionality.
SI-CANopen
Commander C´s SI-CANopen interface module supports various profiles, offering optimum flexibility.
SI-Ethernet
SI-Ethernet can be used to provide high speed drive access, global connectivity and integration with IT network technologies.
SI-EtherCAT
SI-EtherCAT allows Commander C general purpose drive to connect and interface with EtherCAT networks.
SI-PROFINET-V2
SI-PROFINET-V2 allows Commander C to communicate and interface with PROFINET PLCs and networks.
System Integration Modules - Additional I/OSI-I/O
Extended I/O interface module to increase the number of I/O points on a drive. Provides additional: 4 x Digital I/O, 3 x Analog inputs (default)/Digital inputs, 1 x Analog output (default)/Digital input, 2 x Relays.
Optional Accessories AI-BACKUP-ADAPTOR
Port adaptor for SD card parameter cloning, and an input for 24 V back-up.
AI-SMART-ADAPTOR
Has a built-in memory for parameter cloning and an input for 24 V back-up.
AI-485-ADAPTOR
Adaptor that allows the drive to communicate via RS485.
AI-485 24 V Adaptor
Adaptor with 24 V input.
CT-USB-CABLE
The USB comms cable allows the drive to connect to a PC for use with Commander´s PC tools.
Connect - Commissioning tool Based on Control Techniques’ 25 years´ experience, Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance.
DOWNLOAD Advanced machine control Machine Control Studio - Programming tool Control Techniques´ Machine Control Studio provides a flexible and intuitive environment for programming Commander C’s new automation and motion control features.
DOWNLOAD Diagnostics Tool Diagnostic Tool Diagnostic Tool is a fast and simple tool, which allows users of Control Techniques´ drives to quickly solve any error codes that the drive may show.
DOWNLOAD Drive Setup Drive Setup Free access web pages provide ‘how-to’ videos, step by step guides and comprehensive technical manuals for your installation.
www.drive-setup.com
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
