Ürün Açıklaması

Control relays, easyE4 (expandable, Ethernet), 100 - 240 V AC, 110 - 220 V DC (cULus: 100 - 110 V DC), Inputs Digital: 8, screw terminal
Electronic control relay easy-E4 with supply voltage of 100 to 240 V AC or 100 to 240 V DC. In cULus applications applies 100 to 110 VDC to all V DC Information. 8 digital inputs with 100 - 240 VAC or 100 bis 240 VDC are available. The control relay easy-E4 has 4 relay outputs for 12 - 250VAC or 12 - 240VDC. The control relay is equipped with diagnostic LEDs, a clock, an integrated Ethernet interface and screw terminals. This control relay easy-E4 can be extended with the digital input/output extensions of the easyE4 series. A delivery with its own user program is possible via article (Y7) -2010781 EASY-COMBINATION.

Basic function	easyE4 base device
Description	Electronic control relay with diagnostic LEDs with Ethernet interface Expandable with the easyE4 series of digital input/output expansions with easy-E4-CONNECT1 connector (Item Y7-197225) Rated operating voltage 100 to 240 VAC or 100 to 240 VDC (cULus: 100 to 110 VDC) Digital inputs: 8 Digital outputs: 4 relays Screw terminals Delivery with customized user program is possible via Item (Y7) -2010781 EASY-COMBINATION
Digital
Quantity of outputs	8
Real time clock
Expansions	Relay: 4
Supply voltage
Software	✔
Connection type	Expandable networkable (Ethernet)
Standards	100 - 240 V AC, 100 - 240 V DC (cULus: 100 - 110 V DC)
Approvals >Approvals	EASYSOFT-SWLIC/easySoft 7
Approvals >certificate	screw terminal
Approvals >shipping classification
Approvals	EN 61000-6-2 EN 61000-6-3 IEC 60068-2-6 IEC 60068-2-27 IEC 60068-2-30 IEC 61131-2 EN 61010 EN 50178
Dimensions (W x H x D)	cULus
Weight	CE
Mounting	DNV GL
Connection type
Ethernet >Connections	71.5 x 90 x 58 mm
Ethernet >Cable	0.204 kg
Screw terminals >Solid	Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Screw terminals >flexible	screw terminal
Screw terminals >Solid or flexible conductor, with ferrule	RJ45 plug, 8-pin
Screw terminals >Solid or stranded	CAT5
Screw terminals >Standard screwdriver
Screw terminals >Tightening torque	0.2 - 4 mm2
Screw terminals >Stripping length	0.2 - 2.5 mm2
Status indicator (LED)	0,2 - 2,5 mm2
Operating ambient temperature	22 - 12 AWG
Condensation	0.8 x 3.5 mm
Storage [ϑ]	0.5 - 0.7 Nm
relative humidity	6.5 mm
Air pressure (operation)
Protection type (IEC/EN 60529, EN50178, VBG 4)	Power/RUN Ethernet
Vibrations
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms	-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C
Drop to IEC/EN 60068-2-31 [Drop height]	Take appropriate measures to prevent condensation
Free fall, packaged (IEC/EN 60068-2-32)	-40 - +70 °C
Mounting position	in accordance with IEC 60068-2-30, IEC 60068-2-78 5 - 95 %
Overvoltage category/pollution degree	795 - 1080 hPa
Electrostatic discharge (ESD) >applied standard
Electrostatic discharge (ESD) >Air discharge	IP20
Electrostatic discharge (ESD) >Contact discharge	In accordance with IEC 60068-2-6 constant amplitude 0.15 mm: 10 - 57 constant acceleration 2 g: 57 - 150 Hz
Electromagnetic fields (RFI) to IEC EN 61000-4-3	18 Impacts
Radio interference suppression	50 mm
Burst	0.3 m
power pulses (Surge)	Vertical or horizontal
Immunity to line-conducted interference to (IEC/EN 61000-4-6)
Clearance in air and creepage distances	III/2
Insulation resistance	according to IEC EN 61000-4-2
Back-up of real-time clock	8 kV
Accuracy of real-time clock to inputs	6 kV
Accuracy of timing relays (of values)	0.8 - 1.0 GHz: 10 1.4 - 2 GHz: 3 2.0 - 2.7 GHz: 1 V/m
Resolution >Range “S”	EN 61000-6-3 Class B
Resolution >Range “M:S”	according to IEC/EN 61000-4-4 Supply cables: 2 Signal cables: 2 kV
Resolution >Range “H:M”	according to IEC/EN 61000-4-5 1 kV (supply cables, symmetrical) 2 kV (supply cables, asymmetrical)
Rated operational voltage [Ue]	10 V
Permissible range [Ue]
Residual ripple	nach EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201
Protection against polarity reversal	per EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201
Frequency
Voltage dips
Fuse	① Backup time (hours) with fully charged double layer capacitor ② Service life (years)
Power loss [P]	typ. ± 2 (± 0.2 h⁄Year) s/day
Number	depending on ambient air temperature fluctuations of up to ± 5 s/day (± 0.5 h⁄year) are possible
Potential isolation
Rated operational voltage [Ue]	± 0.02 %
Input voltage [Ue]	5 ms
Rated frequency	1 s
Input current at signal 1	1 min
Deceleration time
Cable length	100 - 240V DC (-15/+10%) 100 - 240 DC (cULus: 100 -110 DC) (-15/+10%) V
Number	85 - 264 V AC 85 - 264 V DC (cULus: 85 - 120 V DC)
Outputs in groups of	≦ 5 %
Parallel switching of outputs for increased output	yes
Protection of an output relay	50/60 (± 5%) Hz
Potential isolation	≤ 20 ms at 100V AC 10 ms at 100V DC ms
Contacts >Conventional thermal current (10 A UL)	≧ 1A (T) A
Contacts >Recommended for load: 12 V AC/DC	Normally 10 W
Contacts >Rated impulse withstand voltage Uimp of contact coil
Contacts >Rated operational voltage [Ue]	8
Rated insulation voltage [Ui]	from power supply: no for memory card: no for Ethernet interface: yes between inputs: no from the outputs: yes to the base unit: yes to the expansion units: yes
Safe isolation according to EN 50178	100 - 240 V AC 100 - 240 V DC (cULus: 100 - 110 V DC) V
Making capacity >AC–-15, 250 V AC, 3 A (600 ops./h) [Operations]	Condition 0: 0 - 40V AC/DC Condition 1: 79–264 V AC/DC (cULus: 79–264 V AC/79–120 V DC) V
Making capacity >DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]	50/60 Hz
Breaking capacity >AC-15, 250 V AC, 3 A (600 Ops./h) [Operations]	I1 - I6: 6 x 0.25 (at 115 V AC, 60 Hz) I7, I8: 2 x 4 (at 115 V AC, 60 Hz) I1 - I6: 6 x 0.5 (at 230 V AC, 50 Hz) I7, I8: 2 x 6 (at 230 V AC, 50 Hz) I1 - I8: 8 x 0.25 (at 115V DC) I1 - I8: 8 x 0.5 (at 230V DC) mA
Breaking capacity >DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]	45/38 (0 -> 1/1 -> 0, debounce ON 50/60Hz) for AC type 25⁄21 (0 -> 1/1 -> 0, debounce OFF 50/60Hz) for AC 20 (0 -> 1/1 -> 0, debounce ON) for DC type 0.03 (0 -> 1/1 -> 0, debounce OFF) for DC ms
Filament bulb load >1000 W at 230/240 V AC [Operations]	40 (unshielded) (I1 - I6) 100 (unshielded) (I7, I8) m
Filament bulb load >500 W at 115/120 V AC [Operations]
Fluorescent lamp load >Fluorescent lamp load 10 x 58 W at 230/240 V AC >With upstream electrical device [Operations]	4
Fluorescent lamp load >Fluorescent lamp load 10 x 58 W at 230/240 V AC >Uncompensated [Operations]	1
Fluorescent lamp load >Fluorescent lamp load 1 x 58 W at 230/240 V AC, conventional, compensated [Operations]	Not permitted
Switching frequency >Mechanical operations	B16 circuit breaker or 8 A (T) fuse
Switching frequency >Switching frequency	Safe isolation according to EN 50178: 300 V AC Basic isolation: 600 V AC from power supply: yes From the inputs: yes between outputs: yes to Ethernet: yes to control buttons: yes to expansion devices: yes
Switching frequency >Resistive load/lamp load	8 A
Switching frequency >Inductive load	> 500 mA
UL/CSA >Uninterrupted current at 240 V AC	6 kV
UL/CSA >Uninterrupted current at 24 V DC	240 V AC
UL/CSA >AC >Control Circuit Rating Codes (utilization category)	240 V AC
UL/CSA >AC >Max. rated operational voltage	300 between coil and contact 300 between two contacts V AC
UL/CSA >AC >max. thermal continuous current cos ϕ = 1 at B 300	300000
UL/CSA >AC >max. make/break cos ϕ ≠ capacity 1 at B 300	200000
UL/CSA >DC >Control Circuit Rating Codes (utilization category)	300000
UL/CSA >DC >Max. rated operational voltage	200000
UL/CSA >DC >Max. thermal uninterrupted current at R 300	25000
UL/CSA >DC >Max. make/break capacity at R 300	25000
Power loss [P]	25000
Data transfer rate	25000
Connections	25000
Cable	10 x 106
Static heat dissipation, non-current-dependent [Pvs]	10 Hz
Operating ambient temperature min.	2 Hz
Operating ambient temperature max.	0.5 Hz
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	10 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	8 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	B 300 Light Pilot Duty
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	300 V AC
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	5 A
10.2 Strength of materials and parts >10.2.5 Lifting	3600/360 VA
10.2 Strength of materials and parts >10.2.6 Mechanical impact	R 300 Light Pilot Duty
10.2 Strength of materials and parts >10.2.7 Inscriptions	300 V DC
10.3 Degree of protection of ASSEMBLIES	1 A
10.4 Clearances and creepage distances	28/28 VA
10.5 Protection against electric shock
10.6 Incorporation of switching devices and components	10 W
10.7 Internal electrical circuits and connections
10.8 Connections for external conductors	10/100 Mbit/s
10.9 Insulation properties >10.9.2 Power-frequency electric strength	RJ45 plug, 8-pin
10.9 Insulation properties >10.9.3 Impulse withstand voltage	CAT5
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material
10.10 Temperature rise	10 W
10.11 Short-circuit rating	-25 °C
10.12 Electromagnetic compatibility	+55 °C
10.13 Mechanical function
Supply voltage AC 50 Hz	Meets the product standard´s requirements.
Supply voltage AC 60 Hz	Meets the product standard´s requirements.
Supply voltage DC	Meets the product standard´s requirements.
Voltage type of supply voltage	Meets the product standard´s requirements.
Switching current	Meets the product standard´s requirements.
Number of analogue inputs	Does not apply, since the entire switchgear needs to be evaluated.
Number of analogue outputs	Does not apply, since the entire switchgear needs to be evaluated.
Number of digital inputs	Meets the product standard´s requirements.
Number of digital outputs	Meets the product standard´s requirements.
With relay output	Meets the product standard´s requirements.
Number of HW-interfaces industrial Ethernet	Does not apply, since the entire switchgear needs to be evaluated.
Number of interfaces PROFINET	Does not apply, since the entire switchgear needs to be evaluated.
Number of HW-interfaces RS-232	Is the panel builder´s responsibility.
Number of HW-interfaces RS-422	Is the panel builder´s responsibility.
Number of HW-interfaces RS-485	Is the panel builder´s responsibility.
Number of HW-interfaces serial TTY	Is the panel builder´s responsibility.
Number of HW-interfaces USB	Is the panel builder´s responsibility.
Number of HW-interfaces parallel	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Number of HW-interfaces Wireless	Is the panel builder´s responsibility.
Number of HW-interfaces other	Is the panel builder´s responsibility.
With optical interface	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Supporting protocol for TCP/IP
Supporting protocol for PROFIBUS
Supporting protocol for CAN	85 - 264 V
Supporting protocol for INTERBUS	85 - 264 V
Supporting protocol for ASI	85 - 264 V
Supporting protocol for KNX	AC/DC
Supporting protocol for MODBUS	8 A
Supporting protocol for Data-Highway	0
Supporting protocol for DeviceNet	0
Supporting protocol for SUCONET	8
Supporting protocol for LON	4
Supporting protocol for PROFINET IO	Yes
Supporting protocol for PROFINET CBA	1
Supporting protocol for SERCOS	0
Supporting protocol for Foundation Fieldbus	0
Supporting protocol for EtherNet/IP	0
Supporting protocol for AS-Interface Safety at Work	0
Supporting protocol for DeviceNet Safety	0
Supporting protocol for INTERBUS-Safety	0
Supporting protocol for PROFIsafe	0
Supporting protocol for SafetyBUS p	0
Supporting protocol for other bus systems	1
Radio standard Bluetooth	No
Radio standard WLAN 802.11	Yes
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
Redundancy	No
With display	Yes
Degree of protection (IP)	No
Basic device	No
Expandable	No
Expansion device	No
With timer	No
Rail mounting possible	No
Wall mounting/direct mounting	No
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1	No
SIL according to IEC 61508	No
Performance level acc. EN ISO 13849-1	No
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	No
Explosion safety category for dust	No
Width	No
Height	No
Depth	No
UL File No.	No
UL Category Control No.	No
North America Certification	No
Degree of Protection	IP20