Ürün Açıklaması

Weigh module, 2 DMS, 24 bits
Weigh module for connecting two Wheatstone bridges (strain gauge load cells). With a 24-bit resolution, readings will be available with an accuracy of ±0.035%.

Function	XN300 technology modules
Connection technique	Push-in spring-cage terminal
Function	XN-322 weigh module for XN300
Short Description	Weigh module, 2DMS, 24Bit
For use with	XN-312-…
Standards
Approvals >Approvals	IEC/EN 61131-2 IEC/EN 61000-6-2 IEC/EN 61000-6-4
Approvals >shipping classification	CE, cULus EAC
Approvals	DNV GL
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge]
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]	8 / 4 kV
Electromagnetic compatibility (EMC) >Burst >Supply cable	10 / 3 / 1 V/m
Electromagnetic compatibility (EMC) >Burst >Signal cable	2 kV
Electromagnetic compatibility (EMC) >Surge >Supply cable (balanced / unbalanced)	1 kV
Electromagnetic compatibility (EMC) >Surge >Signal cable (unbalanced)	0,5 / 0,5 kV
Electromagnetic compatibility (EMC) >Radiated RFI	1 kV
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]	10 V
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips	40 / 47 class A dB
Ambient conditions >Climatic conditions >Climatic proofing	Yes / 10 ms
Ambient conditions >Climatic conditions >Air pressure (operation)	Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3
Ambient conditions >Climatic conditions >Relative humidity	795 - 1080 hPa
Ambient conditions >Climatic conditions >Condensation	0 - 95%, non condensing
Ambient conditions >Temperature >Operation	prevent with suitable measures
Ambient conditions >Temperature >Storage, transport [ϑ]	0 - +60 °C
Degree of Protection	-20 - +85 °C
Mounting position	IP20
Free fall, packaged (IEC/EN 60068-2-32)	Horizontal
Vibrations [3,5 mm / 1 g]	1 m
Mechanical shock resistance [Semisinusoidal 15 g/11 ms]	5 - 8.4 / 8.4 -150 Hz
Rated operational data >Insulating material group	18 Impacts
Rated operational data >Overvoltage category / pollution degree
Rated operational data >Rated operating voltage	I
Rated operational data >Maximum load current/cross-sectional area	III / 3
Connection design in TOP direction	160 V
Stripping length	X (not specified by plug manufacturer) A / mm²
Gauge pin IEC/EN 60947-1	Push-in spring-cage terminal (plug-in connection)
Connection specifications >"e" solid H07V-U	10 mm
Connection specifications >"f" flexible H 07V-K	A1
Connection specifications >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)	0.2 - 1.5 mm2
Connection specifications >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)	0.2 - 1.5 mm2
Connection specifications >Cable size	0.25 - 1.5 mm2
Power supply - Input >Power supply >Current consumption for +5 V power supply (internal) [I]	0.25-1,5 mm2
Power supply - Input >Power supply >Current consumption for +24 V power supply [I]	24 - 16 AWG
Power supply - Output >Sensor/transmitter supply >Rated operating voltage [Ua]
Power supply - Output >Sensor/transmitter supply >Rated operational current [Imax]	(typ.)50 mA
Power supply - Output >Sensor/transmitter supply >Potential isolation	(typ.)34 mA
Power supply - Output >Sensor/transmitter supply >Rated operating voltage [Ua]	5 (X1, X2) V
Power supply - Output >Sensor/transmitter supply >Rated operational current [Imax]	66.3 A
Power supply - Output >Sensor/transmitter supply >Potential isolation	no
Heat dissipation >Heat dissipation (without active channels)	5 (X1, X2) V
Heat dissipation >Max. heat dissipation	66.3 A
Heat dissipation >Notes on heat dissipation	no
Channels	0.785 W
Measured variables	1.295 W
Resolution	The max. heat dissipation is specified as the maximum power produced inside the device´s housing.
Min. value refresh time/cycle time [per channel / all channels]
Software input filter	2 Quantity
Potential isolation	Voltage
Notes on analog inputs	24 Bit
Rated operational current for specified heat dissipation [In]	4 / 4 ms
Heat dissipation per pole, current-dependent [Pvid]	parameterizable
Equipment heat dissipation, current-dependent [Pvid]	no
Static heat dissipation, non-current-dependent [Pvs]	Wheatstone bridge, configurable measurement range
Heat dissipation capacity [Pdiss]
Operating ambient temperature min.	0 A
Operating ambient temperature max.	0 W
Degree of Protection	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	1.3 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 °C
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	+55 °C
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	IP20
10.2 Strength of materials and parts >10.2.5 Lifting
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Supply voltage AC 50 Hz	Is the panel builder´s responsibility.
Supply voltage AC 60 Hz	Is the panel builder´s responsibility.
Supply voltage DC	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Voltage type of supply voltage	Is the panel builder´s responsibility.
Number of functions	Is the panel builder´s responsibility.
Number of HW-interfaces industrial Ethernet	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of interfaces PROFINET
Number of HW-interfaces RS-232
Number of HW-interfaces RS-422	0 - 0 V
Number of HW-interfaces RS-485	0 - 0 V
Number of HW-interfaces serial TTY	0 - 0 V
Number of HW-interfaces parallel	DC
Number of HW-interfaces Wireless	0
Number of HW-interfaces USB	0
Number of HW-interfaces other	0
With optical interface	0
Supporting protocol for TCP/IP	0
Supporting protocol for PROFIBUS	0
Supporting protocol for CAN	0
Supporting protocol for INTERBUS	0
Supporting protocol for ASI	0
Supporting protocol for KNX	0
Supporting protocol for MODBUS	0
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
System accessory	No
Suitable for counting	No
Suitable for weighting	No
Suitable for temperature control	No
Suitable for welding control	No
Suitable for pressure control	No
Suitable for NC	No
Function electronic positioning available	No
Suitable for CNC	Yes
Suitable for SSI	No
Suitable for incremental data detection	Yes
Suitable for detection absolute value	No
Flux controller possible	No
Suitable for flux measurement	No
Suitable for path controller	No
Suitable for cam controller	No
Suitable for flying saw	No
Suitable for multi-axis control	No
Single-axis controller possible	No
Suitable for multi-axis positioning	No
Single-axis positioning possible	No
Function block restart blockage	No
Function block automatic reset	No
Contactor control function block	No
Function block emergency stop	No
Function block contactless working protection installation	No
Function block affirm pushbutton	No
Function block 2-hand switching	No
Function block operating mode selection	No
Function block access control	No
Degree of protection (IP)	No
Degree of protection (NEMA)	No
Fieldbus connection over separate bus coupler possible	No
Frequency measurement	No
Rail mounting possible	No
Wall mounting/direct mounting	No
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	IP20
Category according to EN 954-1
SIL according to IEC 61508	No
Performance level acc. EN ISO 13849-1	No
Appendant operation agent (Ex ia)	Yes
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	No
Explosion safety category for dust	No
Width	No
Height
Depth	None
Product Standards	None
UL File No.	No
Link to sheet catalogue	No