SKU: Eaton-178792
Analog input module; 8 thermocouple inputs and two KTY inputs
Analog input module for eight thermocouples and two KTY temperature sensors for cold-junction compensation purposes.
Function | XN300 I/O slice modules |
Connection technique | Push-in spring-cage terminal |
Function | XN-322 analog input module for XN300 |
Short Description | 8 analog thermocouple inputs and two KTY inputs |
For use with | XN-312-… |
Standards | |
Approvals >Approvals |
IEC/EN 61131-2 IEC/EN 61000-6-2 IEC/EN 61000-6-4 |
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
CE, cULus EAC |
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
8 / 4 kV |
Electromagnetic compatibility (EMC) >Burst >Supply cable |
10 / 3 / 1 V/m |
Electromagnetic compatibility (EMC) >Burst >Signal cable |
2 kV |
Electromagnetic compatibility (EMC) >Surge >Supply cable (balanced / unbalanced) |
1 kV |
Electromagnetic compatibility (EMC) >Surge >Signal cable (unbalanced) |
0,5 / 0,5 kV |
Electromagnetic compatibility (EMC) >Radiated RFI |
1 kV |
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
10 V |
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
40 / 47 class A dB |
Ambient conditions >Climatic conditions >Climatic proofing |
Yes / 10 ms |
Ambient conditions >Climatic conditions >Air pressure (operation) |
Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3 |
Ambient conditions >Climatic conditions >Relative humidity |
795 - 1080 hPa |
Ambient conditions >Climatic conditions >Condensation |
0 - 95%, non condensing |
Ambient conditions >Temperature >Operation |
prevent with suitable measures |
Ambient conditions >Temperature >Storage, transport [ϑ] |
0 - +60 °C |
Degree of Protection | -20 - +85 °C |
Mounting position | IP20 |
Free fall, packaged (IEC/EN 60068-2-32) | Horizontal |
Vibrations [3,5 mm / 1 g] | 1 m |
Mechanical shock resistance [Semisinusoidal 15 g/11 ms] | 5 - 8.4 / 8.4 -150 Hz |
Rated operational data >Insulating material group |
18 Impacts |
Rated operational data >Overvoltage category / pollution degree |
|
Rated operational data >Rated operating voltage |
I |
Rated operational data >Maximum load current/cross-sectional area |
III / 3 |
Connection design in TOP direction | 160 V |
Stripping length | X (not specified by plug manufacturer) A / mm² |
Gauge pin IEC/EN 60947-1 | Push-in spring-cage terminal (plug-in connection) |
Connection specifications >"e" solid H07V-U |
10 mm |
Connection specifications >"f" flexible H 07V-K |
A1 |
Connection specifications >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.2 - 1.5 mm2 |
Connection specifications >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.2 - 1.5 mm2 |
Connection specifications >Cable size |
0.25-1,5 mm2 |
Power supply - Input >Power supply >Current consumption for +5 V power supply (internal) [I] |
0.25-1,5 mm2 |
Power supply - Input >Power supply >Current consumption for +24 V power supply [I] |
24 - 16 AWG |
Power supply - Input >Power supply >Potential isolation [PE (polyethylene)] |
|
Heat dissipation >Heat dissipation (without active channels) |
(typ.)62 mA |
Heat dissipation >Max. heat dissipation |
(typ.)75 mA |
Heat dissipation >Notes on heat dissipation |
no |
Channels | 2.11 W |
Measured variables | 3.04 W |
Resolution | The max. heat dissipation is specified as the maximum power produced inside the device´s housing. |
Min. value refresh time/cycle time [per channel / all channels] | |
Hardware input filter | 10 Quantity |
Software input filter | temperature |
Potential isolation | 16 Bit |
Temperature and resistance measurement >Channels |
1 / 1 ms |
Temperature and resistance measurement >Connectable sensors |
Typically: 2 Hz; third-order low-pass filter |
Temperature and resistance measurement >Measurement ranges [temperature] |
parameterizable |
Temperature and resistance measurement >Value representation |
no |
Temperature and resistance measurement >For connection of: |
|
Temperature and resistance measurement >Destruction limit [Umax] |
8 thermocouples, 2 KTYs Quantity |
Temperature and resistance measurement >Accuracy |
Thermocouples, type J, K, T, E, N, S, R, B, L, UKTY10 |
Temperature and resistance measurement >Notes on temperature and resistance measurements |
Type J: 0 ... +690 °C Type K: 0 ... +940 °C Type T: 0 ... +400 °C Type E: 0 ... +520 °C Type N: 0 ... +1080 °C Type S: 0 ... +1760 °C Type R: 0 ... +1760 °C Type B: 0 ... +1820 °C Type L: 0 ... +680 °C Type U: 0 ... +590 °C KTY10:-20 ... +80 °C |
Rated operational current for specified heat dissipation [In] | SIGNED16 (0.1 °C) |
Heat dissipation per pole, current-dependent [Pvid] | 2 conductors |
Equipment heat dissipation, current-dependent [Pvid] | 265 V AC (thermocouples), 40V DC (KTY) |
Static heat dissipation, non-current-dependent [Pvs] | ±0.7 % of full scale |
Heat dissipation capacity [Pdiss] | A KTY sensor is included with the product. |
Operating ambient temperature min. | |
Operating ambient temperature max. | 0 A |
Degree of Protection | 0 W |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0 W |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
3.04 W |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
0 W |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 °C |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
+55 °C |
10.2 Strength of materials and parts >10.2.5 Lifting |
IP20 |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
|
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
10.5 Protection against electric shock | Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
10.13 Mechanical function | Is the panel builder´s responsibility. |
Supply voltage AC 50 Hz | Is the panel builder´s responsibility. |
Supply voltage AC 60 Hz | Is the panel builder´s responsibility. |
Supply voltage DC | Is the panel builder´s responsibility. |
Voltage type of supply voltage | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Input, current | Is the panel builder´s responsibility. |
Input, voltage | Is the panel builder´s responsibility. |
Input, resistor | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Input, resistance thermometer | |
Input, thermocouple | |
Input signal, configurable | 0 - 0 V |
Resolution of the analogue inputs | 0 - 0 V |
Output, current | 18 - 30 V |
Output, voltage | DC |
Output signal configurable | No |
Resolution of the analogue outputs | No |
Number of analogue inputs | No |
Number of analogue outputs | Yes |
Analogue inputs configurable | Yes |
Analogue outputs configurable | No |
Number of HW-interfaces industrial Ethernet | 16 Bit |
Number of interfaces PROFINET | No |
Number of HW-interfaces RS-232 | No |
Number of HW-interfaces RS-422 | No |
Number of HW-interfaces RS-485 | 0 Bit |
Number of HW-interfaces serial TTY | 8 |
Number of HW-interfaces parallel | 0 |
Number of HW-interfaces Wireless | Yes |
Number of HW-interfaces USB | Yes |
Number of HW-interfaces other | 0 |
Supporting protocol for TCP/IP | 0 |
Supporting protocol for PROFIBUS | 0 |
Supporting protocol for CAN | 0 |
Supporting protocol for INTERBUS | 0 |
Supporting protocol for ASI | 0 |
Supporting protocol for KNX | 0 |
Supporting protocol for MODBUS | 0 |
Supporting protocol for Data-Highway | 0 |
Supporting protocol for DeviceNet | 1 |
Supporting protocol for SUCONET | No |
Supporting protocol for LON | No |
Supporting protocol for PROFINET IO | No |
Supporting protocol for PROFINET CBA | No |
Supporting protocol for SERCOS | No |
Supporting protocol for Foundation Fieldbus | No |
Supporting protocol for EtherNet/IP | No |
Supporting protocol for AS-Interface Safety at Work | No |
Supporting protocol for DeviceNet Safety | No |
Supporting protocol for INTERBUS-Safety | No |
Supporting protocol for PROFIsafe | No |
Supporting protocol for SafetyBUS p | No |
Supporting protocol for other bus systems | No |
Radio standard Bluetooth | No |
Radio standard WLAN 802.11 | No |
Radio standard GPRS | No |
Radio standard GSM | No |
Radio standard UMTS | No |
IO link master | No |
System accessory | No |
Degree of protection (IP) | No |
Degree of protection (NEMA) | No |
Type of electric connection | No |
Fieldbus connection over separate bus coupler possible | No |
Rail mounting possible | No |
Wall mounting/direct mounting | No |
Front build in possible | No |
Rack-assembly possible | No |
Suitable for safety functions | Yes |
Category according to EN 954-1 | IP20 |
SIL according to IEC 61508 | |
Performance level acc. EN ISO 13849-1 | Screw-/spring clamp connection |
Appendant operation agent (Ex ia) | Yes |
Appendant operation agent (Ex ib) | Yes |
Explosion safety category for gas | No |
Explosion safety category for dust | No |
Width | No |
Height | No |
Depth | |
Product Standards | None |
UL File No. | None |