SKU: Eaton-164307
Overload relay, Direct mounting, Earth-fault protection: none, Ir= 35 - 175 A, 1 N/O, 1 N/C
Overload relay, Product range: Electronic overload relays ZEB, Phase-failure sensitivity: IEC/EN 60947, VDE 0660 Part 102, Description: Test/off button, Reset pushbutton, Manual/auto reset selectable, Protection with heavy starting duty (Class 10A-30), Mounting type: Direct mounting, Auxiliary contacts N/O = Normally open: 1 N/O, Auxiliary contacts N/C = Normally closed: 1 N/C, For use with: DILM185A, DILM225A, Standards: IEC/EN 60947, VDE 0660, UL, CSA, Degree of Protection: IP00
| Product range | Electronic overload relays ZEB |
| Phase-failure sensitivity | IEC/EN 60947, VDE 0660 Part 102 |
| Description | Test/off button Reset pushbutton Manual/auto reset selectable Protection with heavy starting duty (Class 10A-30) |
| Mounting type | Direct mounting |
| Earth-fault protection | |
| Overload releases |
none |
| Contact sequence | |
| N/O = Normally open | 35 - 175 A |
| N/C = Normally closed | |
| For use with | |
| Standards | 1 N/O |
| Climatic proofing | 1 N/C |
| Ambient temperature >Open |
DILM185A DILM225A |
| Ambient temperature >Ambient temperature open max. |
|
| Ambient temperature >Enclosed >Ambient temperature enclosed max. |
IEC/EN 60947, VDE 0660, UL, CSA |
| Mechanical shock resistance | Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Degree of Protection | -25 - +65 °C |
| Protection against direct contact when actuated from front (EN 50274) | 65 °C |
| Altitude | 45 °C |
| Rated impulse withstand voltage [Uimp] | 15 Shock duration 10 ms according to IEC 60068-2-27 g |
| Overvoltage category/pollution degree | IP00 |
| Rated insulation voltage [Ui ] | With terminal cover |
| Rated operational voltage [Ue] | Max. 2000 m |
| Rated frequency [f] | |
| Safe isolation to EN 61140 >Between auxiliary contacts and main contacts |
6000 V AC |
| Safe isolation to EN 61140 >Between main circuits |
III/3 |
| Terminal capacities >Solid |
690 V AC |
| Terminal capacities >Solid or stranded |
690 V AC |
| Terminal capacities >Flat conductor [Lamellenzahl x Breite x Dicke ] |
50/60 Hz |
| Stripping length | 600 V AC |
| Rated impulse withstand voltage [Uimp] | 600 V AC |
| Overvoltage category/pollution degree | 1 x 10 - 95 mm2 |
| Terminal capacities >Solid |
1 x 8 - 4/0 AWG |
| Terminal capacities >Flexible with ferrule |
6 x 18 x 0.8 mm |
| Terminal capacities >Solid or stranded |
22 mm |
| Terminal screw | |
| Tightening torque | 6000 V |
| Tightening torque | III/3 |
| Stripping length | 2 x (0.75 - 4) mm2 |
| Tools >Pozidriv screwdriver |
2 x (0.75 - 2.5) mm2 |
| Tools >Standard screwdriver |
2 x (18 - 12) AWG |
| Rated insulation voltage [Ui ] | M3.5 |
| Rated operational voltage [Ue ] | 0.8 - 1.2 Nm |
| Safe isolation to EN 61140 >between the auxiliary contacts |
7 lb-in |
| Conventional thermal current [Ith ] | 8 mm |
| Rated operational current [Ie
] >AC-15 >Make contact >120 V [Ie ] |
2 Size |
| Rated operational current [Ie
] >AC-15 >Make contact >220 V 230 V 240 V [Ie ] |
1 x 6 mm |
| Rated operational current [Ie
] >AC-15 >Make contact >380 V 400 V 415 V [Ie ] |
500 V AC |
| Rated operational current [Ie
] >AC-15 >Make contact >500 V [Ie ] |
500 V AC |
| Rated operational current [Ie
] >AC-15 >Break contact >120 V [Ie ] |
240 V AC |
| Rated operational current [Ie
] >AC-15 >Break contact >220 V 230 V 240 V [Ie ] |
5 A |
| Rated operational current [Ie
] >AC-15 >Break contact >380 V 400 V 415 V [Ie ] |
1.5 A |
| Rated operational current [Ie
] >AC-15 >Break contact >500 V [Ie ] |
1.5 A |
| Rated operational current [Ie
] >DC L/R ≦ 15 ms |
0.5 A |
| Rated operational current [Ie
] >DC L/R ≦ 15 ms >24 V [Ie ] |
0.5 A |
| Rated operational current [Ie
] >DC L/R ≦ 15 ms >60 V [Ie ] |
1.5 A |
| Rated operational current [Ie
] >DC L/R ≦ 15 ms >110 V [Ie ] |
1.5 A |
| Rated operational current [Ie
] >DC L/R ≦ 15 ms >220 V [Ie ] |
0.9 A |
| Short-circuit rating without welding >max. fuse |
0.8 A |
| Auxiliary contacts >Pilot Duty >AC operated |
Switch-on and switch-off conditions based on DC-13, time constant as specified. |
| Auxiliary contacts >Pilot Duty >DC operated |
0.9 A |
| Short Circuit Current Rating >600 V High Fault >SCCR (fuse) |
0.75 A |
| Short Circuit Current Rating >600 V High Fault >max. Fuse |
0.4 A |
| Rated operational current for specified heat dissipation [In] | 0.2 A |
| Heat dissipation per pole, current-dependent [Pvid] | 6 A gG/gL |
| Equipment heat dissipation, current-dependent [Pvid] | |
| Static heat dissipation, non-current-dependent [Pvs] | B600 |
| Heat dissipation capacity [Pdiss] | R300 |
| Operating ambient temperature min. | 100 kA |
| Operating ambient temperature max. | 400 Class J A |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
|
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
175 A |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
11.86 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
35.6 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
0 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
0 W |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
-25 °C |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
+65 °C |
| 10.3 Degree of protection of ASSEMBLIES | |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.11 Short-circuit rating | Meets the product standard´s requirements. |
| 10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
| Adjustable current range | Is the panel builder´s responsibility. |
| Mounting method | Is the panel builder´s responsibility. |
| Type of electrical connection of main circuit | Is the panel builder´s responsibility. |
| Number of auxiliary contacts as normally closed contact | Is the panel builder´s responsibility. |
| Number of auxiliary contacts as normally open contact | Is the panel builder´s responsibility. |
| Number of auxiliary contacts as change-over contact | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Rated control supply voltage Us at AC 50HZ | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Rated control supply voltage Us at AC 60HZ | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Rated control supply voltage Us at DC | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Release class | |
| Voltage type for actuating | |
| Reset function automatic | 0 - 175 A |
| Reset function input | Direct attachment |
| Reset function push-button | Screw connection |
| Product Standards | 1 |
| UL File No. | 1 |
| UL Category Control No. | 0 |
| CSA File No. | 0 - 0 V |
| CSA Class No. | 0 - 0 V |
| North America Certification | 0 - 0 V |
| Specially designed for North America | Adjustable |
| Suitable for | Self powered |
| Max. Voltage Rating | Yes |
| Degree of Protection | No |
| Characteristic curve | Yes |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024