SKU: Eaton-150622
Circuit-breaker, Ir= 10 - 16 A, Screw terminals, Terminations: IP2X
Circuit-breakers for the protection of cables and conductors, UL489, CSA22.2 no. 5-09, not usable as a main switch
| Product range | PKZM4 motor protective circuit-breakers up to 65 A PKZM4 circuit-breakers up to 32 A according to 489 |
| Basic function | Line and cable protection |
| Function | For protection of cables and conductors |
| Connection technique | Screw terminals |
| Contact sequence | |
| Rated uninterrupted current [Iu] | 16 A |
| Overload releases |
|
| short-circuit release >max. [Irm ] |
10 - 16 A |
| Notes | 248 A |
| Standards | Not usable as a main switch |
| Climatic proofing | |
| Ambient temperature >Storage |
IEC/EN 60947, VDE 0660,UL, CSA |
| Ambient temperature >Open |
Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Ambient temperature >Enclosed |
- 40 - 80 °C |
| Mounting position | -25 - +55 °C |
| Direction of incoming supply | - 25 - 40 °C |
| Degree of protection >Device |
|
| Degree of protection >Terminations |
as required |
| Protection against direct contact when actuated from front (EN 50274) | IP20 |
| Mechanical shock resistance half-sinusoidal shock 10 ms to IEC 60068-2-27 | IP2X |
| Altitude | Finger and back-of-hand proof |
| Terminal capacity main cable >Screw terminals >Solid |
15 g |
| Terminal capacity main cable >Screw terminals >Flexible with ferrule to DIN 46228 |
Max. 2000 m |
| Terminal capacity main cable >Screw terminals >Solid or stranded |
1 x (0.75 - 16) 2 x (0.75 - 16) mm2 |
| Terminal capacity main cable >Screw terminals >Stripping length |
1 x (0.75 - 16) 2 x (0.75 - 16) mm2 |
| Specified tightening torque for terminal screws >Main cable |
14 - 6 AWG |
| Rated impulse withstand voltage [Uimp] | 14 mm |
| Overvoltage category/pollution degree | 3.3 Nm |
| Rated operational voltage [Ue ] | |
| Rated uninterrupted current = rated operational current [Iu = Ie ] | 6000 V AC |
| Rated frequency [f] | III/3 |
| Current heat loss (3 pole at operating temperature) | 690 V AC |
| Impedance per pole | 16 A |
| Lifespan, mechanical [Operations] | 40 - 60 Hz |
| Lifespan, electrical (AC-3 at 400 V) >Lifespan, electrical [Operations] |
14.1 W |
| Max. operating frequency | 29 mΩ |
| Short-circuit rating >DC >Notes |
0.03 x 106 |
| Motor switching capacity >AC-3 (up to 690V) |
0.03 x 106 |
| Motor switching capacity >DC-5 (up to 250V) |
40 Ops/h |
| Temperature compensation >to IEC/EN 60947, VDE 0660 |
up to 250 V |
| Temperature compensation >Operating range |
16 A |
| Temperature compensation residual error for T > 40 °C | 16 (3 contacts in series) A |
| Setting range of overload releases | |
| short-circuit release | - 5…40 °C |
| Short-circuit release tolerance | - 25…55 °C |
| Phase-failure sensitivity | ≦ 0.25 %/K |
| Short Circuit Current Rating (UL489, CSA 22.2 No. ) >480Y / 277V |
0.6 - 1 x Iu |
| Rated operational current for specified heat dissipation [In] | Basic device, fixed: 15.5 x Iu |
| Heat dissipation per pole, current-dependent [Pvid] | ± 20% |
| Equipment heat dissipation, current-dependent [Pvid] | IEC/EN 60947-4-1, VDE 0660 Part 102 |
| Static heat dissipation, non-current-dependent [Pvs] | |
| Heat dissipation capacity [Pdiss] | 65 kA |
| Operating ambient temperature min. | |
| Operating ambient temperature max. | 16 A |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
4.7 W |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
14.1 W |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
0 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
-25 °C |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
+55 °C |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
|
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Rated permanent current Iu | Is the panel builder´s responsibility. |
| Rated voltage | Is the panel builder´s responsibility. |
| Rated short-circuit breaking capacity lcu at 400 V, 50 Hz | Is the panel builder´s responsibility. |
| Overload release current setting | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Adjustment range short-term delayed short-circuit release | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Adjustment range undelayed short-circuit release | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Integrated earth fault protection | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Type of electrical connection of main circuit | |
| Device construction | |
| Suitable for DIN rail (top hat rail) mounting | 16 A |
| DIN rail (top hat rail) mounting optional | 600 - 600 V |
| Number of auxiliary contacts as normally closed contact | 65 kA |
| Number of auxiliary contacts as normally open contact | 0 - 16 A |
| Number of auxiliary contacts as change-over contact | 0 - 0 A |
| With switched-off indicator | 0 - 224 A |
| With under voltage release | No |
| Number of poles | Screw connection |
| Position of connection for main current circuit | Built-in device fixed built-in technique |
| Type of control element | Yes |
| Complete device with protection unit | Yes |
| Motor drive integrated | 0 |
| Motor drive optional | 0 |
| Degree of protection (IP) | 0 |
| Product Standards | No |
| UL File No. | No |
| UL Category Control No. | 3 |
| CSA File No. | Other |
| CSA Class No. | Turn button |
| North America Certification | Yes |
| Specially designed for North America | No |
| Suitable for | No |
| Characteristic curve | IP20 |
| Characteristic curve | UL 489; CSA-C22.2 no. 5-09; IEC60947-4-1; CE marking |
| Characteristic curve | E31593 |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024