SKU: Eaton-140047
ECO gateway for XI/ON I/O system, ethernet IP
The XI/ON standard I/O system adds cost and space-optimized I/O modules and gateways to the XI/ON I/O system. The ECO modules do not need base modules and are fully compatible with the standard XI/ON system. High channel density (up to 16 DI/DO on 13 mm), push-in spring-cage terminals, 8 or 16 channels per module. The ECO gateways support the CANopen bus systems Profibus DP and Ethernet.
Function | XI/ON ECO gateways |
Connection technique | Push-in spring-cage terminal |
Function | XNE-Gateway with integrated supply |
Short Description | supports up to 74 disc-type modules (XN, XNE) 2 x RJ45-socket Address set with decimal rotary coding switch, BootP, DHCP or I/Oassistant Address range: 1 – 254 (dec.) |
Field bus connection | Ethernet (Ethernet-IP protocol) |
Terminal capacity (field bus/supply voltage) | Screw terminals |
Service interface | Mini-USB |
Data transfer rate | 10/100 MBit/s |
Instructions | Bus refreshing module is already integrated. |
Information about equipment supplied | The delivery package for all gateways includes: 2 x end bracket XN-WEW-32/2-SW, 1 x end plate XN-ABPL |
Standards | |
Approvals >Approvals |
EN 61000-6-2 EN 61000-6-4 EN 61131-2 |
Potential isolation | CE, cULus EAC |
Ambient temperature | Yes, through optocoupler |
Storage [ϑ] | 0 - +55 °C |
Operating ambient temperature min. | -25 - +85 °C |
Operating ambient temperature max. | 0 °C |
Relative humidity | +55 °C |
Harmful gases | 5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C) |
Vibration | SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm |
Mechanical shock resistance | according to IEC/EN 60068-2-6 |
Continuous shock resistance (IEC/EN 60068-2-29) | according to IEC 60068-2-27 g |
Drop and topple | According to IEC 60068-2-29 |
Degree of Protection | According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
IP20 |
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
EN 61000-4-2 kV |
Electromagnetic compatibility (EMC) >Burst |
EN 61100-4-2 V/m |
Electromagnetic compatibility (EMC) >Surge |
EN 61100-4-4 |
Electromagnetic compatibility (EMC) >Radiated RFI |
EN 61100-4-5 |
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
EN 61100-4-6 V |
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
EN 55016-2-3 dB |
Electromagnetic compatibility (EMC) >Type test |
EN 61131-2 |
Static heat dissipation, non-current-dependent [Pvs] | to EN 61131-2 |
Other technical data (sheet catalogue) | 8 W |
Rated data | Technical Data |
Connection design in TOP direction | |
Stripping length | according to VDE 0611 Part 1/8.92/IEC/EN 60947-7-1 |
Clamping range | Push-In spring-cage terminals |
Connectable conductors >Solid |
8 mm |
Connectable conductors >Flexible without ferrule |
max. 0.14 - 1.5 mm2 |
Connectable conductors >Flexible with ferrule |
0.25 - 1.5 mm2 |
Gauge pin IEC/EN 60947-1 | 0.25 - 1.5 mm2 |
Bus | 0.25 - 1.5 mm2 |
Bus protocol | A1 |
Maximum station configuration | |
System supply [Usys ] | Ethernet |
Coordination type "2" [Usys] | EtherNet-IP |
Coordination type "1" [Usys] | 74 cards (XN, XNE) of slice design or max. length of station: 1 m |
Field voltage [UL ] | 24 /5 V DC |
Admissible range | 4.7…5.3 V DC |
Residual ripple | 18…30 V DC |
Service interface | 24 V DC |
Connection design for field bus | 18-30 V DC |
Data transfer rate | According to EN 61131-2 % |
Data transfer rate setting | Mini-USB |
Addressing | 2 x RJ45 (Ethernet Switch) |
Address range | 10000, 100000 kBit/s |
Rated operational current for specified heat dissipation [In] | automatic |
Heat dissipation per pole, current-dependent [Pvid] | DIP switch, BootP, DHCP or PGM |
Equipment heat dissipation, current-dependent [Pvid] | 1 - 254 decimal |
Static heat dissipation, non-current-dependent [Pvs] | |
Heat dissipation capacity [Pdiss] | 0 A |
Operating ambient temperature min. | 0 W |
Operating ambient temperature max. | 0 W |
Degree of Protection | 8 W |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0 W |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
0 °C |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
+55 °C |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
IP20 |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
|
10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
10.8 Connections for external conductors | Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
10.10 Temperature rise | Is the panel builder´s responsibility. |
10.11 Short-circuit rating | Is the panel builder´s responsibility. |
10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
10.13 Mechanical function | Is the panel builder´s responsibility. |
Supply voltage AC 50 Hz | Is the panel builder´s responsibility. |
Supply voltage AC 60 Hz | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Supply voltage DC | Is the panel builder´s responsibility. |
Voltage type of supply voltage | Is the panel builder´s responsibility. |
Supporting protocol for TCP/IP | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Supporting protocol for PROFIBUS | |
Supporting protocol for CAN | |
Supporting protocol for INTERBUS | 0 - 0 V |
Supporting protocol for ASI | 0 - 0 V |
Supporting protocol for KNX | 18 - 30 V |
Supporting protocol for MODBUS | DC |
Supporting protocol for Data-Highway | No |
Supporting protocol for DeviceNet | No |
Supporting protocol for SUCONET | No |
Supporting protocol for LON | No |
Supporting protocol for SERCOS | No |
Supporting protocol for PROFINET IO | No |
Supporting protocol for PROFINET CBA | No |
Supporting protocol for Foundation Fieldbus | No |
Supporting protocol for EtherNet/IP | No |
Supporting protocol for AS-Interface Safety at Work | No |
Supporting protocol for DeviceNet Safety | No |
Supporting protocol for INTERBUS-Safety | No |
Supporting protocol for PROFIsafe | No |
Supporting protocol for SafetyBUS p | No |
Supporting protocol for other bus systems | No |
Radio standard Bluetooth | Yes |
Radio standard WLAN 802.11 | No |
Radio standard GPRS | No |
Radio standard GSM | No |
Radio standard UMTS | No |
IO link master | No |
System accessory | No |
Degree of protection (IP) | No |
With potential separation | No |
Fieldbus connection over separate bus coupler possible | No |
Rail mounting possible | No |
Wall mounting/direct mounting | No |
Front build in possible | No |
Rack-assembly possible | Yes |
Suitable for safety functions | IP20 |
Category according to EN 954-1 | No |
SIL according to IEC 61508 | Yes |
Performance level acc. EN ISO 13849-1 | Yes |
Appendant operation agent (Ex ia) | No |
Appendant operation agent (Ex ib) | No |
Explosion safety category for gas | No |
Explosion safety category for dust | No |
Width | |
Height | None |
Depth | None |
Specially designed for North America | No |
Current Limiting Circuit-Breaker | No |
Degree of Protection | None |
Link to sheet catalogue | None |