Ürün Açıklaması

Overload relay, Direct mounting, Earth-fault protection: none, Ir= 20 - 100 A, 1 N/O, 1 N/C
Overload relay, Product range: Electronic overload relays ZEB, Phase-failure sensitivity: IEC/EN 60947, VDE 0660 Part 102, Description: Test/off button, Reset pushbutton, Manual/auto reset selectable, Protection with heavy starting duty (Class 10A-30), Mounting type: Direct mounting, Auxiliary contacts N/O = Normally open: 1 N/O, Auxiliary contacts N/C = Normally closed: 1 N/C, For use with: DILM40, DILM50, DILM65, DILM72, DIULM40, DIULM50, DIULM65, SDAINLM70, SDAINLM90, SDAINLM115, Standards: IEC/EN 60947, VDE 0660, UL, CSA, Degree of Protection: IP20

Product range	Electronic overload relays ZEB
Phase-failure sensitivity	IEC/EN 60947, VDE 0660 Part 102
Description	Test/off button Reset pushbutton Manual/auto reset selectable Protection with heavy starting duty (Class 10A-30)
Mounting type	Direct mounting
Earth-fault protection
Overload releases [Ir ]	none
Contact sequence
N/O = Normally open	20 - 100 A
N/C = Normally closed
For use with
Explosion protection (according to ATEX 94/9/EC)	1 N/O
EC-prototype test certification	1 N/C
Standards	DILM40 DILM50 DILM65 DILM72 DIULM40 DIULM50 DIULM65 SDAINLM70 SDAINLM90 SDAINLM115
Climatic proofing
Ambient temperature >Open	II(2)GD [Ex d] [Ex e] [Ex tb]
Ambient temperature >Ambient temperature open max.	SIRA 13 ATEX 9348X
Ambient temperature >Enclosed >Ambient temperature enclosed max.
Mechanical shock resistance	IEC/EN 60947, VDE 0660, UL, CSA
Degree of Protection	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Protection against direct contact when actuated from front (EN 50274)	-25 - +65 °C
Altitude	65 °C
Rated impulse withstand voltage [Uimp]	45 °C
Overvoltage category/pollution degree	15 Shock duration 10 ms according to IEC 60068-2-27 g
Rated insulation voltage [Ui ]	IP20
Rated operational voltage [Ue]	Finger and back-of-hand proof
Rated frequency [f]	Max. 2000 m
Safe isolation to EN 61140 >Between auxiliary contacts and main contacts
Safe isolation to EN 61140 >Between main circuits	6000 V AC
Terminal capacities >Solid	III/3
Terminal capacities >Solid or stranded	690 V AC
Stripping length	690 V AC
Rated impulse withstand voltage [Uimp]	50/60 Hz
Overvoltage category/pollution degree	600 V AC
Terminal capacities >Solid	600 V AC
Terminal capacities >Flexible with ferrule	1 x 16 - 50 mm2
Terminal capacities >Solid or stranded	1 x 6 - 1 AWG
Terminal screw	14 mm
Tightening torque
Tightening torque	6000 V
Stripping length	III/3
Tools >Pozidriv screwdriver	2 x (0.75 - 4) mm2
Tools >Standard screwdriver	2 x (0.75 - 2.5) mm2
Rated insulation voltage [Ui ]	2 x (18 - 12) AWG
Rated operational voltage [Ue ]	M3.5
Safe isolation to EN 61140 >between the auxiliary contacts	0.8 - 1.2 Nm
Conventional thermal current [Ith ]	7 lb-in
Rated operational current [Ie ] >AC-15 >Make contact >120 V [Ie ]	8 mm
Rated operational current [Ie ] >AC-15 >Make contact >220 V 230 V 240 V [Ie ]	2 Size
Rated operational current [Ie ] >AC-15 >Make contact >380 V 400 V 415 V [Ie ]	1 x 6 mm
Rated operational current [Ie ] >AC-15 >Make contact >500 V [Ie ]	500 V AC
Rated operational current [Ie ] >AC-15 >Break contact >120 V [Ie ]	500 V AC
Rated operational current [Ie ] >AC-15 >Break contact >220 V 230 V 240 V [Ie ]	240 V AC
Rated operational current [Ie ] >AC-15 >Break contact >380 V 400 V 415 V [Ie ]	5 A
Rated operational current [Ie ] >AC-15 >Break contact >500 V [Ie ]	1.5 A
Rated operational current [Ie ] >DC L/R ≦ 15 ms	1.5 A
Rated operational current [Ie ] >DC L/R ≦ 15 ms >24 V [Ie ]	0.5 A
Rated operational current [Ie ] >DC L/R ≦ 15 ms >60 V [Ie ]	0.5 A
Rated operational current [Ie ] >DC L/R ≦ 15 ms >110 V [Ie ]	1.5 A
Rated operational current [Ie ] >DC L/R ≦ 15 ms >220 V [Ie ]	1.5 A
Short-circuit rating without welding >max. fuse	0.9 A
Auxiliary contacts >Pilot Duty >AC operated	0.8 A
Auxiliary contacts >Pilot Duty >DC operated	Switch-on and switch-off conditions based on DC-13, time constant as specified.
Short Circuit Current Rating >600 V High Fault >SCCR (fuse)	0.9 A
Short Circuit Current Rating >600 V High Fault >max. Fuse	0.75 A
Rated operational current for specified heat dissipation [In]	0.4 A
Heat dissipation per pole, current-dependent [Pvid]	0.2 A
Equipment heat dissipation, current-dependent [Pvid]	6 A gG/gL
Static heat dissipation, non-current-dependent [Pvs]
Heat dissipation capacity [Pdiss]	B600
Operating ambient temperature min.	R300
Operating ambient temperature max.	100 kA
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	200 Class J A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	100 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	8.47 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	25.4 W
10.2 Strength of materials and parts >10.2.5 Lifting	0 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	-25 °C
10.3 Degree of protection of ASSEMBLIES	+65 °C
10.4 Clearances and creepage distances
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Meets the product standard´s requirements.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Adjustable current range	Does not apply, since the entire switchgear needs to be evaluated.
Mounting method	Is the panel builder´s responsibility.
Type of electrical connection of main circuit	Is the panel builder´s responsibility.
Number of auxiliary contacts as normally closed contact	Is the panel builder´s responsibility.
Number of auxiliary contacts as normally open contact	Is the panel builder´s responsibility.
Number of auxiliary contacts as change-over contact	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 50HZ	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated control supply voltage Us at AC 60HZ	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated control supply voltage Us at DC	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Release class	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Voltage type for actuating
Reset function automatic
Reset function input	20 - 100 A
Reset function push-button	Direct attachment
Product Standards	Screw connection
UL File No.	1
UL Category Control No.	1
CSA File No.	0
CSA Class No.	0 - 0 V
North America Certification	0 - 0 V
Specially designed for North America	0 - 0 V
Suitable for	Adjustable
Max. Voltage Rating	Self powered
Degree of Protection	Yes
Characteristic curve	No