Ürün Açıklaması

Communication module for XC100/200, 24 V DC, serial, modbus, SUCOM-A, DNP3
Modular programmable controllers XC100 and XC200 offer an outstanding level of scalability. Different CPU performance classes and a wide range of expansion modules (XIOC-Module) are available. The compact modular PLCs XC152 facilitate cost-effective solutions of automation tasks using their computing power, the SmartWire-DT interface as well as a whole range of further interfaces. a particular feature is the ability to integrate the product into modern communication concepts. Data exchange via the Ethernet interface to OPC clients or the integrated WEB servers enables the creation of innovative solutions.

Function	Communication modules
Description	Compact I/O system for connection to XC100/200 Modular PLCs XC100/200 expandable with up to 15 XI/OC modules Optionally, screw terminals or spring-loaded terminals for digital/analog modules
Standards	Serial interface RS232C, RS485, RS422 Modes of operation: Transparent mode MODBUS Master/Slave SUCOM-A DNP3-Protocol
Ambient temperature
Storage [ϑ]	IEC/EN 61131-2 EN 50178
Vibration resistance	0 - +55 °C
Mechanical shock resistance	-20 - +70 °C
Impact resistance	10 - 57 Hz ±0.075 mm 57 - 150 Hz ±1.0 mm
Overvoltage category/pollution degree	15 Shock duration 11 ms g
Protection class	500 g/⌀ 50 mm ±25 g
Degree of Protection	II/2
Emitted interference	1
Weight	IP20
Rated voltage [Ue ]	DIN/EN 55011/22, Class A
Admissible range	0.2 kg
Residual ripple
Neutral poles >Duration of dip	24 (12) V DC
Neutral poles >Repetition rate	20.4 – 28.8 (11.8 – 14.4)
Maximum power loss [Pv]	≦ 5 %
Built-in interfaces	10 ms
Protocol	1 s
Character formats	6.6 W
Control and signal cables
Data transfer rate	RS232(C), RS422, RS485
Potential isolation	Tranparent mode, Modbus Master/Slave, SUCOM-A, DNP3 protocol
Transmit/receive data	8E1, 8O1, 8N1, 8N2, 7E2, 7O2, 7N2, 7E1
Bus terminating resistors	RTS, CTS, DTR, DSR, DCD
Plug arrangement	0.3 …57.6 kBit/s
Current consumption [Ie]	Yes (RS485, RS422)
Number of modules	250/500
Slots	Switchable for RS485, RS422
Operating mode Transparent mode >Data transfer rate	RS232: 9 pole SUB-D plug RS485, 422: plug terminal block
Operating mode Transparent mode >Character formats	275 mA
Operating mode >Transmit/receive data	XC200: 4
Rated operational current for specified heat dissipation [In]	As required
Heat dissipation per pole, current-dependent [Pvid]
Equipment heat dissipation, current-dependent [Pvid]	0.3 …57.6 kBit/s
Static heat dissipation, non-current-dependent [Pvs]	8E1, 8O1, 8N1, 8N2, 7E2, 7O2, 7N2, 7E1
Heat dissipation capacity [Pdiss]	250/500
Operating ambient temperature min.
Operating ambient temperature max.	0 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	6.6 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 °C
10.2 Strength of materials and parts >10.2.5 Lifting	+55 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Number of HW-interfaces industrial Ethernet	Is the panel builder´s responsibility.
Number of interfaces PROFINET	Is the panel builder´s responsibility.
Number of HW-interfaces RS-232	Is the panel builder´s responsibility.
Number of HW-interfaces RS-422	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Number of HW-interfaces RS-485	Is the panel builder´s responsibility.
Number of HW-interfaces serial TTY	Is the panel builder´s responsibility.
Number of HW-interfaces USB	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of HW-interfaces parallel
Number of HW-interfaces Wireless
Number of HW-interfaces other	0
With optical interface	0
Supporting protocol for TCP/IP	1
Supporting protocol for PROFIBUS	1
Supporting protocol for CAN	1
Supporting protocol for INTERBUS	0
Supporting protocol for ASI	0
Supporting protocol for KNX	0
Supporting protocol for MODBUS	0
Supporting protocol for Data-Highway	0
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	Yes
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
Redundancy	No
Type of data transmission	No
Transmission rate	Yes
With potential separation	No
Category according to EN 954-1	No
SIL according to IEC 61508	No
Suitable for safety functions	No
Performance level acc. EN ISO 13849-1	No
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	Serial
Explosion safety category for dust	57.6 kBit/s
Width	No
Height
Depth	None
North America Certification	No
Specially designed for North America	None
Current Limiting Circuit-Breaker	No