134912 DS7-340SX016N0-N

Soft starter, 16 A, 200 - 480 V AC, Us= 24 V AC/DC, Frame size FS2
Soft starter, Description: With internal bypass contacts, Function: Soft starters for three-phase loads, Mains supply voltage (50/60 Hz): ULN= 200 - 480 V AC, Supply voltage: Us= 24 V AC/DC, Control voltage: UC= 24 V AC, 24 V DC, Assigned motor rating (Standard connection, In-Line) at 400 V, 50 Hz: P= 7.5 kW, at 460 V, 60 Hz: P= 10 HP, Rated operational current AC-53: Ie= 16 A, Rated operational voltage: Ue= 200 V, 230 V, 400 V, 480 V, Connection to SmartWire-DT: no, Frame size: FS2, Standards: IEC/EN 60947-4-2, UL 508, CSA22.2-14

Ürün Açıklaması

Soft starter, 16 A, 200 - 480 V AC, Us= 24 V AC/DC, Frame size FS2
Soft starter, Description: With internal bypass contacts, Function: Soft starters for three-phase loads, Mains supply voltage (50/60 Hz): ULN= 200 - 480 V AC, Supply voltage: Us= 24 V AC/DC, Control voltage: UC= 24 V AC, 24 V DC, Assigned motor rating (Standard connection, In-Line) at 400 V, 50 Hz: P= 7.5 kW, at 460 V, 60 Hz: P= 10 HP, Rated operational current AC-53: Ie= 16 A, Rated operational voltage: Ue= 200 V, 230 V, 400 V, 480 V, Connection to SmartWire-DT: no, Frame size: FS2, Standards: IEC/EN 60947-4-2, UL 508, CSA22.2-14
Description With internal bypass contacts
Function Soft starters for three-phase loads
Mains supply voltage (50/60 Hz) [ULN] 200 - 480 V AC
Supply voltage [Us] 24 V AC/DC
Control voltage [UC] 24 V AC
24 V DC
at 400 V, 50 Hz [P]
at 460 V, 60 Hz [P] 7.5 kW
AC-53 [Ie] 10 HP
Rated operational voltage [Ue]
Connection to SmartWire-DT 16 A
Frame size 200 V
230 V
400 V
480 V
Standards no
Approvals FS2
Approvals
Climatic proofing IEC/EN 60947-4-2
UL 508
CSA22.2-14
Ambient temperature
>Operation [ϑ]
CE
Ambient temperature
>Storage [ϑ]
UL
CSA
C-Tick
UkrSEPRO
Altitude Damp heat, constant, to IEC 60068-2-3
Damp heat, cyclic, to IEC 60068-2-10
Mounting position -5 - +40
up to 60 at 2% derating per Kelvin temperature rise °C
Degree of protection
>Degree of Protection
-25 - +60 °C
Protection against direct contact 0 - 1000 m, above that 1 % derating per 100 m , up to 2000 m m
Overvoltage category/pollution degree Vertical
Shock resistance IP20
Vibration resistance to EN 60721-3-2 Finger- and back-of-hand proof
Radio interference level (IEC/EN 55011) II/2
Static heat dissipation, non-current-dependent [Pvs] 8 g/11 ms
Weight 2M2
Rated operating voltage [Ue] B
Supply frequency [fLN] 0.8 W
Rated operational current [Ie ]
>AC-53 [Ie]
0.4 kg
Assigned motor rating (Standard connection, In-Line)
>at 230 V, 50 Hz [P]
Assigned motor rating (Standard connection, In-Line)
>at 400 V, 50 Hz [P]
200 - 480 V AC
Assigned motor rating (Standard connection, In-Line)
>at 200 V, 60 Hz [P]
50/60 Hz
Assigned motor rating (Standard connection, In-Line)
>at 230 V, 60 Hz [P]
16 A
Assigned motor rating (Standard connection, In-Line)
>at 460 V, 60 Hz [P]
4 kW
Overload cycle to IEC/EN 60947-4-2
>AC-53a
7.5 kW
Overload cycle to IEC/EN 60947-4-2
>Internal bypass contacts
5 HP
Short-circuit rating
>Type “1” coordination
5 HP
Short-circuit rating
>Type „2“ coordination (additional with the fuses for coordination type „1“)
10 HP
Fuse base (number x part no.) 16 A: AC-53a: 3 - 5: 75 - 10
Cable lengths
>Solid
Cable lengths
>Flexible with ferrule
PKM0-16 (+ CL-PKZ0)
Cable lengths
>Stranded
3 x 170M1364
Cable lengths
>Solid or stranded
3 x 170H1007
Cable lengths
>Tightening torque
Cable lengths
>Screwdriver (PZ: Pozidriv)
1 x (0.75 - 16)
2 x (0.75 - 10) mm2
Control cables
>Solid
1 x (0.75 - 16)
2 x (0.75 - 10) mm2
Control cables
>Flexible with ferrule
1 x 16 mm2
Control cables
>Stranded
18 - 6 AWG
Control cables
>Solid or stranded
3.2 Nm
Control cables
>Tightening torque
PZ2; 1 x 6 mm mm
Control cables
>Screwdriver
1 x (0.5 - 2.5)
2 x (0.5 - 1.0) mm2
Digital inputs
>Control voltage
>DC-operated
1 x (0.5 - 1.5)
2 x (0.5 - 0.75) mm2
Digital inputs
>Control voltage
>AC operated
1 x (0.5 - 1.5)
2 x (0.5 - 1.0) mm2
Digital inputs
>Current consumption 24 V
>External 24 V
1 x (21 - 14)
2 x (21 - 18) AWG
Digital inputs
>Pick-up voltage
>DC-operated
1.2 Nm
Digital inputs
>Pick-up voltage
>AC operated
0,6 x 3,5 mm
Digital inputs
>Drop-out voltage [x Us ]
>DC operated
Digital inputs
>Drop-out voltage [x Us ]
>AC operated
24 V DC +10 %/- 15 % V DC
Digital inputs
>Pick-up time
>DC operated
24 V AC +10 %/- 15 % V AC
Digital inputs
>Pick-up time
>AC operated
1.6 mA
Digital inputs
>Drop-out time
>DC operated
17.3 - 27 V DC
Regulator supply
>Voltage [Us]
17.3 - 27 V AC
Regulator supply
>Current consumption [Ie]
0 - 3 V DC
Regulator supply
>Notes
0 - 3 V AC
Relay outputs
>Number
250 ms
Relay outputs
>Voltage range
250 ms
Relay outputs
>AC-11 current range
350 ms
Ramp times
>Acceleration
24 V AC/DC +10 %/- 15 % V
Ramp times
>Deceleration
50 mA
Start voltage (= turn-off voltage) External supply voltage
Start pedestal 2 (TOR, Ready)
Fields of application
>Fields of application
250 V AC
Fields of application
>1-phase motors
1 A, AC-11 A
Fields of application
>3-phase motors
Fast switching (semiconductor contactor) 1 - 30 s
Soft start function 0 - 30 s
Reversing starter 30100 %
Suppression of closing transients 30 - 100 %
Suppression of DC components for motors Soft starting of three-phase asynchronous motors
Potential isolation between power and control sections
Rated operational current for specified heat dissipation [In]
Heat dissipation per pole, current-dependent [Pvid]
Equipment heat dissipation, current-dependent [Pvid] - (minimum ramp time 1s)
Static heat dissipation, non-current-dependent [Pvs]
Heat dissipation capacity [Pdiss] External solution required
Operating ambient temperature min.
Operating ambient temperature max.
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat

Rated impulse withstand voltage:

  • 1.2 µs/50 µs (rise time/fall time of the pulse to IEC/EN 60947‐2 or ‐3)
  • Applies for control circuit/power section/enclosure
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
16 A
10.2 Strength of materials and parts
>10.2.5 Lifting
0 W
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
0.8 W
10.2 Strength of materials and parts
>10.2.7 Inscriptions
0.8 W
10.3 Degree of protection of ASSEMBLIES 0 W
10.4 Clearances and creepage distances -5 °C
10.5 Protection against electric shock +40 °C
10.6 Incorporation of switching devices and components
10.7 Internal electrical circuits and connections Meets the product standard´s requirements.
10.8 Connections for external conductors Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Meets the product standard´s requirements.
10.10 Temperature rise Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility Meets the product standard´s requirements.
10.13 Mechanical function Does not apply, since the entire switchgear needs to be evaluated.
Rated operation current Ie at 40 °C Tu Meets the product standard´s requirements.
Rated operating voltage Ue Does not apply, since the entire switchgear needs to be evaluated.
Rated power three-phase motor, inline, at 230 V Does not apply, since the entire switchgear needs to be evaluated.
Rated power three-phase motor, inline, at 400 V Is the panel builder´s responsibility.
Rated power three-phase motor, inside delta, at 230 V Is the panel builder´s responsibility.
Rated power three-phase motor, inside delta, at 400 V Is the panel builder´s responsibility.
Function Is the panel builder´s responsibility.
Internal bypass Is the panel builder´s responsibility.
With display The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Torque control Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated surrounding temperature without derating Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated control supply voltage Us at AC 50HZ The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated control supply voltage Us at AC 60HZ
Rated control supply voltage Us at DC
Voltage type for actuating 16 A
Integrated motor overload protection 230 - 460 V
Release class 4 kW
Degree of protection (IP) 7.5 kW
Degree of protection (NEMA) 0 kW
Product Standards 0 kW
UL File No. Single direction
CSA File No. Yes
CSA Class No. No
Specially designed for North America No
Suitable for 40 °C
Current Limiting Circuit-Breaker 24 - 24 V
Max. Voltage Rating 24 - 24 V
Degree of Protection 24 - 24 V