SKU: Eaton-134910
Soft starter, 9 A, 200 - 480 V AC, Us= 24 V AC/DC, Frame size FS1
Soft starter, Description: With internal bypass contacts, Function: Soft starters for three-phase loads, Mains supply voltage (50/60 Hz): ULN= 200 - 480 V AC, Supply voltage: Us= 24 V AC/DC, Control voltage: UC= 24 V AC, 24 V DC, Assigned motor rating (Standard connection, In-Line) at 400 V, 50 Hz: P= 4 kW, at 460 V, 60 Hz: P= 5 HP, Rated operational current AC-53: Ie= 9 A, Rated operational voltage: Ue= 200 V, 230 V, 400 V, 480 V, Connection to SmartWire-DT: no, Frame size: FS1, Standards: IEC/EN 60947-4-2, UL 508, CSA22.2-14
Description | With internal bypass contacts |
Function | Soft starters for three-phase loads |
Mains supply voltage (50/60 Hz) [ULN] | 200 - 480 V AC |
Supply voltage [Us] | 24 V AC/DC |
Control voltage [UC] | 24 V AC 24 V DC |
at 400 V, 50 Hz [P] | |
at 460 V, 60 Hz [P] | 4 kW |
AC-53 [Ie] | 5 HP |
Rated operational voltage [Ue] | |
Connection to SmartWire-DT | 9 A |
Frame size | 200 V 230 V 400 V 480 V |
Standards | no |
Approvals | FS1 |
Approvals | |
Climatic proofing | IEC/EN 60947-4-2 UL 508 CSA22.2-14 |
Ambient temperature >Operation [ϑ] |
CE |
Ambient temperature >Storage [ϑ] |
UL CSA C-Tick UkrSEPRO |
Altitude | Damp heat, constant, to IEC 60068-2-3 Damp heat, cyclic, to IEC 60068-2-10 |
Mounting position | -5 - +40 up to 60 at 2% derating per Kelvin temperature rise °C |
Degree of protection >Degree of Protection |
-25 - +60 °C |
Protection against direct contact | 0 - 1000 m, above that 1 % derating per 100 m , up to 2000 m m |
Overvoltage category/pollution degree | Vertical |
Shock resistance | IP20 |
Vibration resistance to EN 60721-3-2 | Finger- and back-of-hand proof |
Radio interference level (IEC/EN 55011) | II/2 |
Static heat dissipation, non-current-dependent [Pvs] | 8 g/11 ms |
Weight | 2M2 |
Rated operating voltage [Ue] | B |
Supply frequency [fLN] | 0.45 W |
Rated operational current [Ie
] >AC-53 [Ie] |
0.35 kg |
Assigned motor rating (Standard connection, In-Line) >at 230 V, 50 Hz [P] |
|
Assigned motor rating (Standard connection, In-Line) >at 400 V, 50 Hz [P] |
200 - 480 V AC |
Assigned motor rating (Standard connection, In-Line) >at 200 V, 60 Hz [P] |
50/60 Hz |
Assigned motor rating (Standard connection, In-Line) >at 230 V, 60 Hz [P] |
9 A |
Assigned motor rating (Standard connection, In-Line) >at 460 V, 60 Hz [P] |
2.2 kW |
Overload cycle to IEC/EN 60947-4-2 >AC-53a |
4 kW |
Overload cycle to IEC/EN 60947-4-2 >Internal bypass contacts |
2 HP |
Short-circuit rating >Type “1” coordination |
3 HP |
Short-circuit rating >Type „2“ coordination (additional with the fuses for coordination type „1“) |
5 HP |
Fuse base (number x part no.) | 9 A: AC-53a: 3 - 5: 75 - 10 |
Cable lengths >Solid |
✓ |
Cable lengths >Flexible with ferrule |
PKM0-10 (+ CL-PKZ0) |
Cable lengths >Solid or stranded |
3 x 170M1362 |
Cable lengths >Tightening torque |
3 x 170H1007 |
Cable lengths >Screwdriver (PZ: Pozidriv) |
|
Control cables >Solid |
1 x (0.75 - 4) 2 x (0.75 - 2.5) mm2 |
Control cables >Flexible with ferrule |
1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2 |
Control cables >Solid or stranded |
18 - 10 AWG |
Control cables >Tightening torque |
1.2 Nm |
Control cables >Screwdriver |
PZ2; 1 x 6 mm mm |
Digital inputs >Control voltage >DC-operated |
1 x (0.75 - 4) 2 x (0.75 - 2.5) mm2 |
Digital inputs >Control voltage >AC operated |
1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2 |
Digital inputs >Current consumption 24 V >External 24 V |
18 - 10 AWG |
Digital inputs >Pick-up voltage >DC-operated |
1.2 Nm |
Digital inputs >Pick-up voltage >AC operated |
0,8 x 5,5 1 x 6 mm |
Digital inputs >Drop-out voltage [x Us ] >DC operated |
|
Digital inputs >Drop-out voltage [x Us ] >AC operated |
24 V DC +10 %/- 15 % V DC |
Digital inputs >Pick-up time >DC operated |
24 V AC +10 %/- 15 % V AC |
Digital inputs >Pick-up time >AC operated |
1.6 mA |
Digital inputs >Drop-out time >DC operated |
17.3 - 27 V DC |
Regulator supply >Voltage [Us] |
17.3 - 27 V AC |
Regulator supply >Current consumption [Ie] |
0 - 3 V DC |
Regulator supply >Notes |
0 - 3 V AC |
Relay outputs >Number |
250 ms |
Relay outputs >Voltage range |
250 ms |
Relay outputs >AC-11 current range |
350 ms |
Ramp times >Acceleration |
24 V AC/DC +10 %/- 15 % V |
Ramp times >Deceleration |
50 mA |
Start voltage (= turn-off voltage) | External supply voltage |
Start pedestal | 1 (TOR) |
Fields of application >Fields of application |
= Us V AC |
Fields of application >1-phase motors |
1 A, AC-11 A |
Fields of application >3-phase motors |
|
Fast switching (semiconductor contactor) | 1 - 30 s |
Soft start function | 0 - 30 s |
Reversing starter | 30100 % |
Suppression of closing transients | 30 - 100 % |
Suppression of DC components for motors | Soft starting of three-phase asynchronous motors |
Potential isolation between power and control sections | ● |
Rated operational current for specified heat dissipation [In] | ✓ |
Heat dissipation per pole, current-dependent [Pvid] | |
Equipment heat dissipation, current-dependent [Pvid] | - (minimum ramp time 1s) |
Static heat dissipation, non-current-dependent [Pvs] | ✓ |
Heat dissipation capacity [Pdiss] | External solution required |
Operating ambient temperature min. | ✓ |
Operating ambient temperature max. | ✓ |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
✓ |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
|
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Rated impulse withstand voltage:
|
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
9 A |
10.2 Strength of materials and parts >10.2.5 Lifting |
0 W |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
0.45 W |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
0.45 W |
10.3 Degree of protection of ASSEMBLIES | 0 W |
10.4 Clearances and creepage distances | -5 °C |
10.5 Protection against electric shock | +40 °C |
10.6 Incorporation of switching devices and components | |
10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
10.8 Connections for external conductors | Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
Rated operation current Ie at 40 °C Tu | Meets the product standard´s requirements. |
Rated operating voltage Ue | Does not apply, since the entire switchgear needs to be evaluated. |
Rated power three-phase motor, inline, at 230 V | Does not apply, since the entire switchgear needs to be evaluated. |
Rated power three-phase motor, inline, at 400 V | Is the panel builder´s responsibility. |
Rated power three-phase motor, inside delta, at 230 V | Is the panel builder´s responsibility. |
Rated power three-phase motor, inside delta, at 400 V | Is the panel builder´s responsibility. |
Function | Is the panel builder´s responsibility. |
Internal bypass | Is the panel builder´s responsibility. |
With display | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Torque control | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Rated surrounding temperature without derating | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Rated control supply voltage Us at AC 50HZ | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Rated control supply voltage Us at AC 60HZ | |
Rated control supply voltage Us at DC | |
Voltage type for actuating | 9 A |
Integrated motor overload protection | 230 - 460 V |
Release class | 2.2 kW |
Degree of protection (IP) | 4 kW |
Degree of protection (NEMA) | 0 kW |
Product Standards | 0 kW |
UL File No. | Single direction |
CSA File No. | Yes |
CSA Class No. | No |
Specially designed for North America | No |
Suitable for | 40 °C |
Current Limiting Circuit-Breaker | 24 - 24 V |
Max. Voltage Rating | 24 - 24 V |
Degree of Protection | 24 - 24 V |